Introduction
The POLVCDG X6 bone conduction earphones are designed for active lifestyles, featuring IPX8 waterproofing, 32GB of internal memory, and Bluetooth 5.3 connectivity. These earphones allow you to enjoy music during various activities such as swimming, running, and cycling, without the need for a mobile phone.
Package Contents
Upon opening your POLVCDG X6 package, you should find the following items:

- Outer envelope
- Inner box
- POLVCDG-X6 Bone Conduction Earphones
- Accessory box
- Trial manual + brand introduction (this document)
- Magnetic charger
Setup
1. Charging the Earphones
Before first use, fully charge your POLVCDG X6 earphones. Use the provided magnetic charging cable.
- Connect the magnetic end of the charging cable to the charging port on the earphones.
- Connect the USB end of the cable to a 5V 1A or 5V 2A USB power adapter (not included).
- A full charge typically takes approximately 2 hours.
- Important: Do not use a fast charger to charge the headphones, as this may damage the device.

2. Wearing the Earphones
The POLVCDG X6 features an open-ear hook design for comfortable and non-inductive wear, made from light and comfortable silicone material.
- Place the ear hooks over your ears, ensuring the bone conduction transducers rest comfortably on your cheekbones, just in front of your ears.
- Adjust the headband for a secure and comfortable fit.

3. Bluetooth Pairing
The earphones use Bluetooth 5.3 for stable wireless connection.
- Ensure the earphones are charged and powered on.
- Activate Bluetooth on your smartphone or other device.
- Search for "POLVCDG X6" in the list of available Bluetooth devices.
- Select it to pair. A voice prompt will confirm successful connection.
- The maximum wireless range is approximately 10 meters.
4. MP3 Mode and Music Download
The POLVCDG X6 has 32GB of built-in memory, allowing you to store over 8000 songs and listen without a phone, especially useful for swimming.

To download music to the earphones:
- Connect the earphones to your computer using the complimentary data cable.
- The earphones will automatically appear as a U disk (removable drive) on your computer.
- Open the U disk folder.
- Locate your desired MP3 format songs on your computer (e.g., from a music software's local download folder).
- Drag and drop the MP3 files into the U disk folder of the earphones.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the Power button until the indicator light turns on.
- Power Off: Press and hold the Power button until the indicator light turns off.
2. Music Playback
- Play/Pause: Press the Multi-function button once.
- Next Track: Double-press the Multi-function button.
- Previous Track: Triple-press the Multi-function button.
- Volume Up: Press the Volume Up button.
- Volume Down: Press the Volume Down button.
3. Call Management
- Answer/End Call: Press the Multi-function button once.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
4. Switching Between Bluetooth and MP3 Mode
The earphones support both Bluetooth and MP3 playback modes. A dedicated button or a long press of a specific button (e.g., Multi-function or Power button) typically switches between modes. Refer to the quick start guide included in your accessory box for exact button functions.
5. Voice Assistant
The POLVCDG X6 supports voice assistants such as Amazon Alexa, Apple Siri, and Google Assistant. To activate, press and hold the Multi-function button (or designated voice assistant button) until the voice assistant prompt is heard.
Maintenance
1. Waterproof Care (IPX8)
The earphones are IPX8 waterproof, meaning they can be submerged in water for extended periods. They feature a double-sealed design for enhanced protection.

- After use in water: Always rinse the earphones with clean fresh water and dry them thoroughly, especially the magnetic charging contacts.
- Avoid saltwater/seawater: Do not soak the earphones in seawater or saltwater for prolonged periods. If exposed, rinse immediately with fresh water to prevent corrosion of the charging magnetic part.
2. Cleaning
- After each exercise or use, clean any water or sweat from the surface of the earphones.
- Pay special attention to the magnetic charging position; clean it promptly to prevent sweat and salt water from corroding the contacts and affecting the product's service life.
- Use a soft, dry cloth for general cleaning.
3. Storage
- If the earphones will not be used for a long time, fully charge them at least once a month to maintain battery health.
- Store the product away from fire, high temperatures, freezing conditions, and harsh chemicals.
- Avoid violent impact, disassembly, or unauthorized modification of the product.
Troubleshooting
- Q: Earphones won't turn on.
- A: Ensure the earphones are fully charged. Connect them to the magnetic charger and check if the charging indicator lights up.
- Q: Cannot pair via Bluetooth.
- A: Make sure Bluetooth is enabled on your device and the earphones are within the 10-meter range. Try restarting both the earphones and your device. Ensure no other devices are currently connected to the earphones.
- Q: No sound or poor sound quality.
- A: Check the volume levels on both the earphones and your connected device. Ensure the transducers are positioned correctly on your cheekbones. If in MP3 mode, verify the music files are not corrupted. Clean any debris from the transducers.
- Q: Music not playing in MP3 mode.
- A: Ensure the earphones are switched to MP3 mode. Verify that the music files transferred to the 32GB internal memory are in MP3 format and are not corrupted.
- Q: Charging issues.
- A: Ensure you are using a 5V 1A or 5V 2A charging adapter. Clean the magnetic charging contacts on both the earphones and the cable to ensure a good connection. Do not use fast chargers.
If you encounter any other issues, please contact the official POLVCDG store for support.
Specifications
| Feature | Specification |
|---|---|
| Model | X6 |
| Headphone Type | True Bone Conduction |
| Bluetooth Version | 5.3 |
| Transmission Distance | Up to 10 meters |
| Battery Capacity | 180mAh |
| Charging Input | 5V/100mA |
| Battery Life | Up to 10 hours |
| Internal Memory | 32GB (supports MP3, WAV, APE, FLAC formats) |
| Waterproof Rating | IPX8 (can be soaked for a long time) |
| Weight | 28g |
| Material | PVC, ABS, Plastic, TPU, Silica Gel |
| Frequency Response Range | 20 - 20000Hz |
| Impedance | 32Ω |
| Features | Waterproof, With microphone, Voice assistant support (Amazon Alexa, Apple Siri, Google Assistant), Dual Connection, Playback Control, ENC Call Noise Reduction |
| Colors Available | Rice Orange, Blue Orange, Black Red |

User Tips
- For optimal battery longevity, fully charge your X6 earphones at least once a month, even if not in regular use.
- Always rinse the earphones with fresh water and dry the magnetic charging contacts after use, especially after swimming or heavy sweating, to prevent corrosion.
- Avoid using fast chargers; stick to 5V 1A or 5V 2A adapters for charging to protect the battery and internal components.
- When swimming, utilize the built-in 32GB MP3 player to enjoy music without relying on Bluetooth, which can be unreliable underwater.
- The lightweight and open-ear design ensures comfort during long periods of wear and intense activities.
Warranty and Support
For any product-related issues, technical support, or warranty claims, please contact the official POLVCDG store or your point of purchase. Please note that product damage resulting from not following the instructions in this manual may void your warranty. The final interpretation rights belong to the POLVCDG Official Store.