POLVCDG X7

Contents

POLVCDG X7 Bone Conduction Headset User Manual

Model: X7

1. Introduction

Thank you for choosing the POLVCDG X7 Bone Conduction Headset. This headset is designed to provide an immersive audio experience without blocking your ears, making it ideal for sports, swimming, and daily use. It features IPX8 waterproofing, 32GB of built-in memory, and stable Bluetooth 5.3 connectivity. This manual will guide you through the setup, operation, and maintenance of your new headset.

POLVCDG X7 Bone Conduction Headset

Image: POLVCDG X7 Bone Conduction Headset showcasing its design and key features.

2. Package Contents

Please check the box for the following items:

  • POLVCDG X7 Bone Conduction Headset
  • User Manual
  • Magnetic Charging Cable
  • Earphone Fixing Rope
  • Accessory Box
Diagram of POLVCDG X7 package contents

Image: Diagram illustrating the contents of the POLVCDG X7 product package.

3. Setup

3.1. Charging the Headset

Before first use, ensure the headset is fully charged. When the headset indicates low power with a "Di-Di" voice prompt, it needs recharging.

  1. Connect the magnetic charging cable to the headset's magnetic charging port.
  2. A full charge typically takes about 2 hours.
  3. The charging status indicator will show a flashing breathing light during charging and a solid blue light when fully charged.

Note:

  • Ensure the magnetic charging cable is correctly aligned with the charging port. Correct alignment will result in mutual attraction; repulsion indicates incorrect alignment and may prevent charging or cause a short circuit.
  • Use a 5V 1A or 5V 2A charging adapter. Do not use fast chargers.
Magnetic charging port detail

Image: Close-up of the magnetic charging port and cable connection.

3.2. Powering On/Off

  • To Power On: Press and hold the Power On/Off key for 3-5 seconds. The indicator light will turn on.
  • To Power Off: Press and hold the Power On/Off key for 3-5 seconds. The indicator light will turn off.

3.3. Bluetooth Pairing

  1. Ensure the headset is powered off.
  2. Press and hold the Power On/Off key for 3-5 seconds. The indicator light will flash red and blue alternately, indicating it's in pairing mode.
  3. On your device (smartphone, computer, etc.), enable Bluetooth and search for available devices.
  4. Select "X7" from the list to connect. Once connected, the headset is ready for use.

Note:

  • The headset will automatically search for and connect to the most recently paired device upon powering on.
  • If the headset is out of range (>10 meters) from your device for an extended period, you may need to manually reconnect by clicking the Power On/Off key once it's back within range.

4. Operating Instructions

Video: Demonstration of headset unboxing, wearing, and basic controls.

4.1. Music Playback Controls

FunctionOperation
Play/PauseClick the Power On/Off key
Volume UpClick the "+" button
Volume DownClick the "-" button
Next SongLong press the "+" button
Previous SongLong press the "-" button

4.2. Call Management

FunctionOperation
Answer CallClick the Power On/Off key
Hang Up CallClick the Power On/Off key
Reject CallLong press the Power On/Off key for 2 seconds

4.3. Bluetooth/MP3 Mode Switching

Double-click the Power On/Off key to switch between Bluetooth mode and internal memory (MP3) mode. The headset defaults to Bluetooth mode upon powering on.

4.4. AI Intelligent Voice Control

When connected via Bluetooth, long press the Power On/Off key for 1 second to activate your device's voice assistant (e.g., Siri, Google Assistant). You will hear a prompt, after which you can issue voice commands to your phone.

5. Music Download to Internal Memory

The POLVCDG X7 features 32GB of built-in memory, capable of storing approximately 8,000 high-quality music files for offline listening.

  1. Connect the headset to your computer using the provided magnetic charging cable.
  2. Your computer should automatically recognize the headset as a USB drive. Open the headset's drive.
  3. Locate the music files you wish to transfer on your computer. Ensure they are in a compatible format (MP3, WMA, WAV, APE, FLAC).
  4. Drag and drop the music files into the headset's USB drive folder.
  5. Once the transfer is complete, safely eject the headset from your computer.

Video: Step-by-step guide on how to download music to the headset's internal memory.

6. Maintenance and Care

  • Water Exposure: While IPX8 waterproof, avoid prolonged soaking in seawater or saltwater. After use in such conditions, rinse the headset with fresh water and dry thoroughly. The magnetic charging contacts are susceptible to corrosion.
  • Storage: If not used for an extended period, fully charge the headset at least once a month to maintain battery health.
  • Cleaning: After each use, especially after exercise, wipe any water or sweat from the headset's surface, paying particular attention to the magnetic charging area. This prevents corrosion and extends product life.
  • Handling: Keep the product away from fire, extreme temperatures (hot or freezing), and harsh chemicals. Avoid violent impacts, disassembly, or excessive squeezing of the product.
  • Charging Adapter: Use only a 5V 1A or 5V 2A charging adapter. Do not use fast chargers, as this can damage the headset.
  • Disassembly: Do not attempt to disassemble any part of the product. If you notice any defects, discontinue use immediately and contact customer support.

7. Troubleshooting

ProblemPossible Solution
Headset won't power on.Ensure the headset is charged. Press and hold the Power On/Off key for 3-5 seconds.
Cannot pair with Bluetooth.Ensure the headset is in pairing mode (red and blue flashing light). Check your device's Bluetooth settings and try searching again. Make sure no other devices are connected.
No sound or poor sound quality.Check volume levels on both the headset and your connected device. Ensure the headset is within Bluetooth range. If in MP3 mode, ensure music files are properly loaded.
Charging issues.Verify the magnetic charging cable is correctly aligned and securely connected. Try a different 5V 1A/2A charging adapter. Clean the charging contacts if dirty.
Microphone quality during calls is poor.Ensure the microphone is not obstructed. Maintain close proximity to your connected device for optimal Bluetooth signal. Check your device's call settings.
Headset disconnects frequently.Ensure the headset is within the 10-meter Bluetooth range and there are no significant obstructions between the headset and your device.

8. Specifications

FeatureDetail
Brand NamePOLVCDG
ModelX7
MaterialPVC, ABS, Plastic, TPU, Silica Gel
Weight26g (bare metal)
Dimensions (approx.)Width: 45mm, Depth: 135mm, Height: 112mm
Battery Capacity200mAh
Battery LifeUp to 10 hours (at 65% volume)
Charging TimeApprox. 2 hours
Standby Time300 hours
Bluetooth Version5.3
Wireless Range<10 meters
Waterproof RatingIPX8 (Professional PB level waterproof)
Internal Memory32GB (stores approx. 8,000 songs)
Music Format SupportMP3, WMA, WAV, APE, FLAC
Vocalism PrincipleBone Conduction
Frequency Response Range20 - 20000Hz
Sensitivity42dB
Impedance RangeUp to 32 Ω
Total Harmonic Distortion5%
FeaturesWaterproof, With microphone, Amazon Alexa Support, Apple Siri Support, Playback Control, Google Assistant Support, NFC Technology, Sound Isolating, Volume Control, Active Noise-Cancellation, Support Memory Card
CertificationsCE, FCC, RoHS

9. User Tips

  • For optimal call quality, ensure the microphone is clear of obstructions and maintain a stable Bluetooth connection by staying within range of your device.
  • Always use a standard 5V 1A or 5V 2A charger. Avoid fast charging adapters to prevent potential damage to the headset's battery and circuitry.
  • The headset automatically attempts to reconnect to the last paired device upon power-on, simplifying daily use.
  • When switching between Bluetooth and MP3 modes, a quick double-click of the Power On/Off button is all it takes.

10. Warranty and Support

Your POLVCDG X7 Bone Conduction Headset comes with a product warranty. Please retain your purchase receipt and the product warranty card for any future service needs. The warranty card includes fields for product name, model, purchase date, customer name, contact information, and a record of any maintenance performed.

In case of any defects or issues with your product, please discontinue use and contact the seller or authorized service provider for assistance. Do not attempt to repair or disassemble the product yourself, as this may void your warranty.

For further support or inquiries, please refer to the contact information provided by your retailer or on the official POLVCDG website.

User manual (PDF) reference: View User Manual PDF


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.