MEKEDE Android 13 Car Radio for VW Touareg Transporter T5

Contents

MEKEDE Android 13 Car Radio User Manual

For VW Touareg / Transporter T5 (2004-2011)

MEKEDE Android 13 Car Radio main unit

MEKEDE Android 13 Car Radio for VW Touareg Transporter T5 (2004-2011) with Car-Play, Android-Auto, WIFI, BT, GPS.

1. Product Overview

This MEKEDE Android 13 Car Radio is designed to upgrade the multimedia and navigation capabilities of your VW Touareg or Transporter T5 (models 2004-2011). It features a 7-inch touchscreen display, built-in GPS, Wi-Fi, Bluetooth, Car-Play, and Android Auto support, providing a comprehensive in-car entertainment and information system.

Before and After Installation of the car radio

Visual comparison of the dashboard before and after installing the MEKEDE car radio.

2. Package Contents

Please check the package carefully upon receipt to ensure all items are present and undamaged.

  • Main Head Unit (Machine)
  • Power Cable
  • RCA Cable
  • Reversing Camera (Optional, may not be included in all packages)
  • GPS Antenna
  • USB Cables (x2)
  • Microphone (MIC)
  • Radio Antenna Adapter
Package Contents of the car radio

Visual representation of all components included in the MEKEDE car radio package.

3. Installation Guide

3.1. Wiring Diagram

Refer to the diagram below for proper connection of all cables to the back of the head unit. Ensure all connections are secure before powering on the device.

Back of the host device with wiring diagram

Detailed view of the rear panel of the head unit, indicating connections for power, audio/video, USB, camera input, GPS, and radio antenna. Note: If your car requires Canbus, connect the appropriate cable to the designated port.

Detailed view of accessories and wiring

Detailed view of the RCA cable, reversing camera, microphone, GPS antenna, and USB cables. Also shows specific wiring for WiFi Antenna, BT Signal Amplifier, and Reversing Camera.

3.2. Physical Installation

  1. Carefully remove your existing car radio unit.
  2. Connect the power cable, RCA cables, GPS antenna, USB cables, microphone, and radio antenna adapter to the corresponding ports on the back of the MEKEDE head unit as shown in the wiring diagram.
  3. If your vehicle requires a Canbus connection, ensure the Canbus cable is properly connected.
  4. Slide the new head unit into the dashboard slot.
  5. Secure the unit in place using the appropriate mounting brackets and screws.
  6. Test all functions before fully reassembling the dashboard.

4. Operating Instructions

4.1. Main Interface Navigation

The main interface provides access to all primary functions of the car radio. Some functions or settings may differ slightly between machine versions.

Main Menu interface options

Various main menu interface options for easy navigation.

  • Click on an icon: To launch the corresponding application or function.
  • Home Icon: Click to return to the main interface.
  • Recent Programs Icon: Click to open recently run programs.
  • Close Screen Icon: Click to close the screen, then click anywhere to resume.
  • Return Icon: Press this button on any interface to return to the previous interface.

4.2. Status Bar Icons

  • USB Device Icon: Indicates USB device display.
  • Time Display (e.g., 1:56): Shows the current system display time.
  • Bluetooth Icon: Highlighted when Bluetooth connection is successful.
  • GPS Icon: Indicates GPS functionality.
  • Network Icon: Highlighted when network connection is successful.

4.3. General Operations

  1. Drop-down Menu: In any interface, slide down from the top of the display screen to access the drop-down menu. Here you can view system notifications, adjust display brightness, adjust volume, access Settings, and manage wireless network connections.
  2. Application Management: Long press an application icon on the main interface to move its location or delete third-party applications.

4.4. Radio Function

  • Radio Icon: Click to access the radio interface.
  • Band Switch (FM-1): The radio includes FM1, FM2, FM3. Click the switch button to select the desired band.
  • Auto Switch Bands Icon: Click to automatically switch between radio bands.
  • Search Stations Icon: Click to search for available radio stations.
  • Browse/Save Station Icon: Click to browse or save radio stations.
  • EQ Interface Icon: Click to enter the Equalizer (EQ) interface for sound adjustments.
  • Fine Tune Search: Click forward or backward to fine-tune the search. You can also drag the progress bar to manually search for stations.
  • Radio Frequency Scale Bar: Visual indicator of the radio frequency.
  • Search Button: On the radio interface, a blue indicator will appear when searching or browsing.
  • Direct Frequency Selection: Directly slide the frequency bar to the desired station frequency.

Radio Settings

  • Factory Settings: In the setting interface, enter the password to access radio settings.
  • Local Setting: Click "Local Setting" to select your region (e.g., Asia, Europe, North America) and confirm.
  • RDS (Radio Data System): Click the RDS option to turn it on or off. When on, the radio interface will display RDS keys.
    • AF (Alternative Frequencies): Automatically searches for other channels of the current radio station for better, stable frequency.
    • TA (Traffic Announcement): Detects and switches to traffic program/announcements.
    • TP (Traffic Program): Indicates if the current station supports traffic signals.
FM Radio and DAB+ support

The unit supports FM Radio. DAB+ functionality is available but requires an additional purchase.

4.5. Music Playback

  • Playlist/Favorites: Click the icon to view playlists, favorite lists, and recent playlists. Favorite songs can be collected by clicking the heart icon, which turns red upon successful collection.
  • File Library: Click the icon to view the music file library.
  • Playing Mode: Toggle between random, cyclic list, and single playing modes.
  • Play/Pause: Click to play or pause music.
  • Previous/Next Song: Click to switch to the previous or next song.
  • Sound Effect Settings: Click the icon to enter sound effect settings.

Other Music Operations:

  • Delete Song: In the song list, long-press the name of a song to delete it.
  • Seek Track Time: When playing music, slide the progress bar to jump to a desired track time.

4.6. Video Playback

  • Video Icon: Click to play all video files from HD storage and USB. Swipe left to view all video lists.
  • Currently Playing Videos: Swipe right to see the list of videos currently playing.
  • Play/Pause Video: Click to play or pause video.
  • Previous/Next Video: Click to switch to the previous or next video.
  • Zoom In/Out: Icons for zooming in or out of the video.

Other Video Operations:

  • Seek Playback Time: When playing video, slide the playback progress bar to jump to a desired time.
1080P Video playback support

The unit supports 1080P video decoding with True Color 24 HD-display for clear details.

4.7. Bluetooth Function

Support BT Function display

Bluetooth function supports phonebook, music streaming, and call records.

  • Bluetooth Icon: Click to enter the Bluetooth interface.
  • Connection Status:
    • If not connected, "Bluetooth is not connected" will appear. Click the button to enter Bluetooth settings.
    • If connected, "Bluetooth connected successfully" will appear.
  • Dialing Interface: Click to enter the Bluetooth dialing interface.
  • Contacts Interface: Click to enter the Bluetooth contact interface.
  • Call Recording Interface: Click to enter the Bluetooth call recording interface.
  • Collection Interface: Click to enter the Bluetooth collection interface.
  • Dialing: After successful connection, the dial button is displayed, and you can directly dial a phone number.
  • Hang Up/Answer: Click to hang up or answer a call.
  • Audio Source Switch:
    • If current call audio is car terminal, click to switch to mobile terminal.
    • If current call audio is mobile terminal, click to switch to car terminal.
  • Call Record Sync: Click to update call records from the mobile terminal and synchronize to the car terminal.
  • Missed Call Record Sync: If you miss a call, click to update and sync the record.
  • Address Book Sync: Click to update the address book on the car terminal. You can also check the address book on the bus terminal.

4.8. Bluetooth Music

Ensure your mobile phone is connected to the car radio via Bluetooth.

  • Bluetooth Music Icon: Click to access Bluetooth music.
  • Play/Pause: Click to play or pause music.
  • Previous/Next Song: Click to switch to the previous or next song.

4.9. Sound Settings

  • Select different types of preset sound effects.
  • Customize user mode to adjust the frequency band.
  • Adjust heavy bass and surround sound settings.
  • Click the "Reset" button to restore sound effect settings to default.
  • Boot Memory Volume Range: Access this setting via the drop-down bar or main settings. If the main volume is 10 when turned off, and boot memory is set to 13-30, it defaults to 13 on restart. If the main volume is 33 when turned off, it defaults to 30 on restart.

4.10. File Manager

  • Query files, expand files.
  • Query pictures, video, audio, and recent files. Downloaded pictures, storage space, pictures, video, and audio can be copied to specified locations.

4.11. Steering Wheel Control

This unit supports digital Steering Wheel Control (SWC) for convenient operation.

Steering Wheel Control feature

Instructions for programming steering wheel buttons for music and hands-free calling.

  1. Click "Select button" to choose the learning button.
  2. Select functions: mode, power, navigation, main interface, volume +/-, FM, AM, search radio, previous/next song, play/pause, mute, return, Bluetooth, hang up, answer, APP. Up to 12 buttons can be selected.
  3. Choose between short or long press for each function.
  4. Click "Start", select a function, and press the corresponding steering wheel button to learn.
  5. Restore Factory: Removes all learned operations and restores to factory state.
  6. Save: Click "Save" after learning to exit the application.

4.12. Car Settings

Access various vehicle-specific settings:

  • Network: Access WIFI connection interface; optional manual network connection.
  • Bluetooth: Enter interface for pairing new devices. Device name can be used to search for open Bluetooth devices. Set connection preferences.
  • Display: Adjust brightness settings for day/night mode and wallpaper settings.
  • Dormancy: Set hibernation aging and mode.
  • Body Setup: Handbrake detection settings (open, close, cover).
  • Navigation Settings:
    • Select third-party navigation software.
    • Adjust mixing ratio for navigation voice volume when other audio is playing.
  • Factory Setup: (Does not support customer operations)
  • More Settings:
    • System Settings: System restart, restore factory settings (clears files, operate carefully).
    • Voice and Input Method: Add languages, switch keyboard/input methods, advanced input help.
    • Date and Time: Optional automatic network time and manual adjustment.
    • Sound: Adjust main volume, installation media volume, Bluetooth volume, backup media volume, Bluetooth ringtone volume, and navigation volume. Reset to default if needed.
  • About the Machine: Displays vehicle-mounted Android basic information, storage, hardware, and system information.
Support multiple languages

The system supports a wide range of languages including English, German, French, Spanish, Italian, Portuguese, Russian, Dutch, Polish, Japanese, Simplified & Traditional Chinese, Arabic, etc.

CPlink is an application that supports wireless and wired CarPlay functionality, an in-vehicle system by Apple.

Wireless Connection Steps:

  1. Connect the car's Bluetooth with an iPhone.
  2. Enter the CPlink application and wait for the connection.

Wired Connection Steps:

  1. Enter the CPlink application.
  2. Plug the iPhone USB cable into the 4-pin USB port and wait for the connection.

4.14. Android Auto

Android Auto is an application that supports wireless and wired Android Auto functionality, an in-vehicle system by Google.

Wireless Connection Steps:

  1. Connect the car's Bluetooth with an Android mobile phone.
  2. Enter the Android Auto application and wait for the connection.

Wired Connection Steps:

  1. Enter the Android Auto application.
  2. Plug the Android mobile phone USB cable into the 4-pin USB port and wait for the connection.

5. Advanced Features

5.1. GPS Navigation

The unit features a built-in global positioning system with omni-directional map display. It supports real-time traffic conditions and provides rapid and accurate positioning using GPS, BDS, and GLONASS.

GPS Navigation display

GPS Navigation display showing map functionality with GPS, BDS, GLONASS support. Supports various map applications like Navitel, iGO, Yandex, and Google Maps.

5.2. Split Screen Functionality

Support for two applications to be displayed on the screen at the same time, making operation more convenient and faster. For example, you can view a map while listening to music or watching a video.

Split screen support

Example of split screen showing Map + Music and Map + Online video.

5.3. Support for ADAS DVR (Optional)

The unit supports an Anti-collision warning driving recorder (ADAS DVR). This feature provides front vehicle distance prediction, front vehicle anti-collision warning, and lane departure warning to enhance driving safety. Note: ADAS DVR is not included and must be purchased separately.

Support ADAS DVR (Anti-collision warning driving recorder) feature

Visual explanation of ADAS DVR features including front car start reminder, lane deviation warning, and front distance collision warning.

5.4. Rear View Camera Support (Optional)

The system automatically switches to the reverse screen with parking lines when the car is put into reverse, aiding in safer parking. Note: The rear view camera is not included and must be purchased separately.

Rear View Camera support

Diagram showing how the rear view camera integrates with the car radio for HD imaging and parking assistance.

5.5. Support for OBD II (Optional)

The unit supports On-board Diagnostics (OBD II) functionality. With an OBD II device, you can monitor real-time car data and retrieve fault codes from your vehicle's computer at any time. Note: OBD II is not included and must be purchased separately.

Support OBD II (On-board diagnostics) feature

Illustration of OBD II functionality, showing how it can monitor car status and display data via the car radio.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior of the unit. Avoid abrasive cleaners or solvents.
  • Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can usually be found on the manufacturer's website or through the device's system settings (if available).
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

7. Troubleshooting

  • No Power:
    • Check all power connections to ensure they are secure.
    • Verify the car's fuse related to the radio is intact.
  • No Sound:
    • Check speaker wiring connections.
    • Ensure volume is not muted or set too low.
    • Check sound settings in the system menu.
  • Bluetooth Connection Issues:
    • Ensure Bluetooth is enabled on both the car radio and your mobile device.
    • Delete previous pairings and try re-pairing.
    • Restart both devices.
  • GPS Not Working / Inaccurate:
    • Ensure the GPS antenna is properly installed and has a clear view of the sky.
    • Check GPS settings in the system menu.
    • Update map data if available.
  • Steering Wheel Controls Not Responding:
    • Ensure the SWC wiring is correctly connected.
    • Re-program the steering wheel buttons through the "Steering Wheel Key" settings.
  • Screen Frozen / Unresponsive:
    • Perform a system restart via "More Settings" > "System Settings" > "System restart".
    • If persistent, consider restoring factory settings (Note: this will clear all user data).

8. Specifications

Feature Specification
Brand Name MEKEDE
Operating System Android
Display Size 7 inches
Resolution 1024*600
RAM 2 G
ROM 32G
Out Power 4*45W
Voltage 12 V
Item Weight 1.8 kg
Item Size 7inch (229mm x 117mm)
Interface Plug and Play
Material Type Plastic and Metal
Special Features WiFi function, Support steering wheel control, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, DSP, CarPlay, Android Auto, Reversing Input
Digital Media Format Mp3, MP4, WMA, JPEG
OSD Language Multi-language support (Chinese, Arabic, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Thai, Turkish, Ukrainian, Vietnamese, etc.)
Certification CE, FCC
Compatible Vehicle Brands/Model Volkswagen (Touareg, Transporter T5 2004-2011)
Dimensions of the 7-inch unit

Physical dimensions of the 7-inch car radio unit: 229mm width, 117mm height.

Resolution comparison

Comparison of display resolutions, highlighting the 1024*600 resolution of this unit.

Button Light customization options

Customizable button light colors: Original, Red, Orange, Yellow, Green, Blue, Indigo, White.

9. Warranty and Support

9.1. Warranty Information

This product comes with a 12-month manufacturer's limited warranty for defective items (excluding items damaged and/or misused after receipt). Accessories typically come with a 3-month warranty.

Defective items must be reported and returned within the warranty period (and in original packaging if possible). You must provide details of the defect and your order number. Items with an expired warranty will not be repaired or replaced.

MEKEDE Warranty information

Summary of MEKEDE's 12-month limited warranty policy.

9.2. User Manual (PDF)

A detailed user manual in PDF format is available for download. This document provides additional information and visual aids for installation and operation.

Download User Manual (PDF)

10. User Tips

  • Vehicle Compatibility: This unit is specifically designed for VW Touareg and Transporter T5 models from 2004-2011. While some users inquire about compatibility with other VW models like Golf MK4, it's crucial to verify fitment and wiring for your specific vehicle before purchase and installation.
  • Camera Installation: The unit supports both front and rear cameras. If you plan to install a rear camera, ensure it is compatible with the unit's input specifications. Front cameras may require additional wiring or adapters depending on the camera type.
  • Canbus Connection: For vehicles that require Canbus integration, ensure the correct Canbus cable is used and properly connected to enable features like steering wheel controls and vehicle information display.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.