wishiot T0423

Contents

MOC 4WD Remote Control Car Chassis Kit

Model: T0423 - Instruction Manual

Brand: Wishiot

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Wishiot MOC 4WD Remote Control Car Chassis Kit (Model T0423). This kit is designed for enthusiasts aged 14 and above, allowing you to build a functional four-wheel-drive technical car chassis compatible with MOC Power Functions. Please read this manual carefully before beginning assembly to ensure correct usage and to maximize your enjoyment of the product.

2. Package Contents

The complete kit (Bundle 4) includes the following components:

  • 1 SET 4WD Car Chassis Bricks Parts (requires assembly)
  • 4 PCS 62.4*20mm Wheels
  • 1 PCS IR Controller (Remote Control)
  • 1 PCS IR Receiver
  • 1 PCS AA Battery Box (requires 6x AA batteries, not included)
  • 1 PCS M Motor
  • 1 PCS Servo Motor

Note: Please pay attention to small parts during unpacking and assembly.

Various MOC building block components and gears

Image: Assortment of MOC building block components and gears included in the kit.

Four 62.4x20mm wheels

Image: Four 62.4*20mm wheels for the car chassis.

IR Controller and AA Battery Box

Image: The IR Controller (remote) and the AA Battery Box.

M Motor component

Image: The M Motor component.

Servo Motor component

Image: The Servo Motor component.

3. Safety Information

  • Recommended Age: This product is recommended for users aged 14 years and older.
  • Small Parts Warning: The kit contains small parts which may pose a choking hazard for young children. Keep out of reach of children under 3 years.
  • Battery Safety: Always use the correct type and size of batteries (6x AA batteries for the battery box). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity. Remove batteries if the product is not used for an extended period.
  • Electrical Connections: Ensure all electrical connections are secure and correctly made. Do not force connectors.

4. Assembly Instructions

The MOC 4WD Car Chassis Kit requires self-assembly using the provided bricks and electronic components. Follow these general steps:

  1. Obtain Installation Document: It is highly recommended to contact the seller to obtain the detailed installation document. This document will provide step-by-step visual guides for assembling the chassis and integrating the electronic components.
  2. Chassis Assembly: Begin by assembling the structural bricks to form the car chassis. Ensure all connections are firm and stable.
  3. Wheel Attachment: Attach the four 62.4*20mm wheels to the chassis as per the design.
  4. Motor Installation: Integrate the M Motor and Servo Motor into the chassis structure. The M Motor typically drives the wheels, while the Servo Motor is often used for steering.
  5. Battery Box Installation: Securely place the AA Battery Box within the chassis.
  6. Battery Insertion: Open the AA Battery Box and insert 6x AA batteries, ensuring correct polarity. Close the battery box securely.
  7. Wiring Connections: Connect the M Motor, Servo Motor, and IR Receiver to the AA Battery Box.
    • Important Wiring Note: The Servo Motor cannot be connected directly to the AA Battery Box. It must be connected via the IR Receiver or another compatible Power Functions hub. Refer to the installation document for the correct wiring diagram.
  8. IR Receiver Placement: Position the IR Receiver in a location where it has a clear line of sight to the IR Controller for optimal signal reception.
Assembled MOC 4WD car chassis with remote control

Image: Fully assembled MOC 4WD car chassis with the remote control unit.

Assembled MOC 4WD car chassis with remote control, top-down view

Image: Top-down view of the assembled MOC 4WD car chassis and remote control.

5. Operating Instructions

Once assembled and powered, your 4WD Remote Control Car Chassis is ready for operation:

  1. Power On: Ensure batteries are correctly installed in the AA Battery Box and the IR Controller. Turn on the power switch on the battery box.
  2. Pairing (if necessary): The IR Controller and IR Receiver should automatically pair. If not, ensure they are on the same channel (if channel selection is available on your specific IR components).
  3. Driving Controls: Use the IR Controller to operate the car.
    • Typically, one joystick/set of buttons controls forward/backward movement (M Motor).
    • Another joystick/set of buttons controls left/right steering (Servo Motor).
  4. Four-Wheel Drive: The chassis is designed for 4WD, providing enhanced traction and control.
Assembled MOC 4WD car chassis with remote control

Image: The assembled car chassis ready for remote control operation.

6. Maintenance

  • Cleaning: Regularly clean the chassis and components with a soft, dry cloth. Avoid using water or harsh chemicals, especially on electronic parts.
  • Battery Care: Remove batteries from the AA Battery Box and IR Controller if the kit will not be used for an extended period to prevent leakage.
  • Connection Check: Periodically check all brick connections and wiring to ensure they are secure and free from damage.
  • Storage: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

Problem Possible Cause Solution
Car does not move/respond to remote.
  • Batteries are dead or incorrectly inserted.
  • Power switch is off.
  • IR Controller and Receiver not paired or out of range.
  • Loose wiring connection.
  • Replace batteries in both the AA Battery Box and IR Controller. Check polarity.
  • Ensure power switch on battery box is ON.
  • Ensure clear line of sight between IR Controller and Receiver. Check channel settings.
  • Inspect all wiring for secure connections.
Servo Motor (steering) not working.
  • Servo Motor directly connected to battery box.
  • Faulty Servo Motor or wiring.
  • Ensure Servo Motor is connected via the IR Receiver or a compatible Power Functions hub, not directly to the battery box.
  • Check connections. If problem persists, contact support.
Car moves erratically or slowly.
  • Low battery power.
  • Gears are jammed or misaligned.
  • Replace batteries.
  • Inspect gears for any obstructions or incorrect assembly.

8. Specifications

Feature Detail
Model Number T0423
Brand Name wishiot
Recommend Age 14+y
Is Electric No Battery (requires 6x AA batteries)
Remote Control Yes (IR Controller included)
Work with for MOC Power Functions
Wheel Size 62.4*20mm

Package Dimensions & Weight:

  • Length: 10 cm
  • Width: 10 cm
  • Height: 10 cm
  • Weight: 0.6 kg

9. User Tips

  • Organize Parts: Before starting assembly, sort all the bricks and components. This will significantly speed up the building process.
  • Test Electronics: It's a good practice to test the motors, IR Receiver, and IR Controller with the battery box before fully integrating them into the chassis to ensure they are functional.
  • Secure Connections: Ensure all brick connections are tight to prevent the chassis from falling apart during play.
  • Experiment: MOC kits are designed for creativity. Once you've built the standard chassis, feel free to experiment with modifications and custom designs.

10. Warranty and Support

For any questions regarding the assembly, operation, or components of your MOC 4WD Remote Control Car Chassis Kit, please contact Wishiot Store directly. They can provide the necessary installation documents and support for your product.

Contact Information: Please refer to your purchase platform or seller's store page for direct contact methods.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.