1. Introduction
The NOYAFA NF-IPC715 is a versatile 5.4-inch IPS touch screen IP camera tester designed for the maintenance and installation of IP, analog, and HD coaxial cameras, as well as other security equipment. Its 1920x1080 resolution display supports network HD cameras and analog cameras in high definition. This all-in-one unit integrates numerous functions including ONVIF PTZ control, analog PTZ control, and comprehensive cable testing, enhancing safety and productivity for CCTV installers.
Key Applications:
- CCTV system installation and maintenance
- Network cabling project installation and maintenance
- Dome camera, IP TVI CVI AHD 4K H.265 camera testing
- Video transmission channel testing
- PTZ controller operations
2. Package Contents
Ensure all items listed below are present in your package:
- 1x NF-IPC715 Tester Unit
- 1x Network Cable Tester (Remote Kit)
- 1x DC12V 1A Power Adapter
- 1x Lithium-ion Battery (built-in)
- 1x Tool Bag
- 1x DC Power Cable
- 1x BNC Cable
- 1x RS485 Cable
- 1x Audio Cable
- 1x Safety Cord
- 1x Wrist Belt
- 1x User Manual
Figure 2: Package Contents
3. Product Overview
The NF-IPC715 features a robust design with multiple ports and controls for various testing scenarios.
3.1 Physical Layout
Figure 3: NF-IPC715 Port Layout
Key Ports and Controls:
- Off button: Power on/off the device.
- LED lights: Built-in flashlight function.
- Gigabit Ethernet/PoE output: For network connections and PoE power output.
- DC12V/3A output: Provides temporary power to cameras.
- Micro SD: Slot for Micro SD card for storage.
- HDMI IN: HDMI input port, supports up to 4K 30FPS.
- AHD CVI TVI: BNC input for HD coaxial cameras.
- 12V 2A charging port: For charging the device.
- Audio input: For audio signal testing.
- RS485 interface: For PTZ control.
- UTP/SCAN (Network cable test/hunting interface): For cable testing.
- VGA signal input: VGA input port, supports up to 2048x1152 60FPS.
4. Setup and Initial Operation
4.1 Powering On/Off
Press and hold the 'Off' button located on the top left side of the device to power it on or off. The device will boot to the main menu.
4.2 Basic Navigation
The NF-IPC715 features a 5.4-inch IPS touch screen. Navigate through the menus and applications by tapping on the icons. Use the physical buttons on the right side for quick access to Home, Back, Search, and Flashlight functions.
4.3 Charging the Device
Connect the provided DC12V 1A adapter to the '12V 2A charging port' on the bottom of the device. A full charge takes approximately 3-4 hours and provides about 5 hours of normal working time.
4.4 Flashlight Function
The device includes a built-in flashlight. Press the flashlight button on the right side of the device to toggle it on or off.
Figure 4: Flashlight Function
5. Operating Instructions
5.1 Camera Testing
The NF-IPC715 supports various camera types and testing functionalities.
5.1.1 IP Camera Test (4K/H.265/H.264)
- IP Discovery/Quick ONVIF/IPC test /RTSP play /Client APK: Use these applications to discover, configure, and test IP cameras.
- Rapid Video: Automatically view video streams and create testing reports.
- HIKVISION test tool: Supports batch activation, IP address modification, password changes, channel name customization, H.264/H.265 video switching, wide dynamic mode activation, and factory restore for HIKVISION cameras.
- DAHUA test tool: Supports batch activation, IP address modification, username/password changes, and channel name customization for DAHUA cameras.
- PoE Power Output: The device can provide 48V PoE power (max 25.5W) to power IP cameras directly.
Figure 5: PoE Power Supply
5.1.2 HD Coaxial Camera Test (8MP AHD/CVI/TVI)
Connect your 8MP AHD, CVI, or TVI camera to the BNC input. The device supports 3840x2160P resolution at 12.5/15 FPS, 4x zoom, video recording, playback, coaxial PTZ control, and OSD menu calls.
5.1.3 Analog Camera Test (CVBS)
Connect analog cameras to the BNC input. The device supports NTSC/PAL auto-adaptation, PTZ control via RS485 (Baud 600-115200bps), and compatibility with over 30 protocols including PELCO-D/P, Samsung, and Panasonic.
5.1.4 HDMI & VGA Input
- HDMI Input: Connect external devices via HDMI. Supports up to 4K (3840x2160P) at 30FPS.
- VGA Input: Connect external devices via VGA. Supports up to 2048x1152P at 60FPS.
Figure 6: HDMI Input Functionality
5.1.5 Video Recording, Playback & Snapshot
During camera testing, you can record video, take snapshots, and play back saved media directly on the device. Access these functions via the on-screen controls.
5.2 Cable Testing
The NF-IPC715 offers advanced cable testing capabilities.
5.2.1 UTP Cable Test
Connect UTP cables to the dedicated port. The tester displays the connection status and can detect near-end, mid-end, and far-end fault points of the network cable crystal head. Test reports can be saved.
5.2.2 RJ45 TDR Cable Test
Perform TDR tests on RJ45 cables to check cable pair status, length, attenuation, reflectivity, impedance, and skew. The measurement range is up to 180 meters. Test reports can be generated and saved.
Figure 7: RJ45 TDR Cable Test
6. Advanced Functions
6.1 Network Tools
Access a suite of network diagnostic tools:
- Ping: Test network connectivity.
- IP Scan: Scan for active IP addresses on the network.
- Port Flash: Locate network ports by flashing their link lights.
- DHCP Server: Manage DHCP services.
- Trace Route: Trace the path of data packets across a network.
- Link Monitor: Monitor real-time upload and download speeds and other network parameters.
6.2 Wi-Fi Connectivity
The device has built-in Wi-Fi (150M speeds) to display images from wireless cameras and can also create a Wi-Fi hotspot.
6.3 Audio Test
Connect an audio source to the audio input to test if the sound is normal. The device supports recording and saving audio.
6.4 Power Management
Monitor DC 12V input and output voltage and power in real-time.
6.5 Data Monitor
Captures and analyzes command data from controlling devices and can send hexadecimal data.
6.6 Media Player & App Installation
The device includes a media player for 4K video files and MKV/MP4 media. It also supports self-updating software and installing Android-version applications.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Avoid abrasive cleaners or solvents.
- Battery Care: Charge the device regularly to maintain battery health. Avoid fully discharging the battery for extended periods.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Software Updates: Periodically check for and install software updates to ensure optimal performance and access to new features.
8. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect the charger and try again.
- No video display: Check all cable connections (BNC, HDMI, VGA, Ethernet). Verify camera power supply. Ensure the correct input mode is selected on the tester.
- Network test failures: Verify cable integrity with the UTP/RJ45 TDR tests. Check network settings and IP configurations.
- Touch screen unresponsive: Restart the device. If the issue persists, contact support.
- Poor image quality: Check camera resolution settings and cable quality. Ensure proper focus and lighting.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | NF-IPC715 |
| LCD Display | New 5.4 inch IPS touch screen, 1920x1080 resolution |
| Video Mode CVBS | 1 channel BNC input, NTSC/PAL (Auto adapt) |
| CVBS PTZ Control | RS485 control, Baud 600-115200bps, compatible with >30 protocols (PELCO-D/P, Samsung, Panasonic etc) |
| IP Camera Test | 4K/H.265/H.264, IP Discovery/Quick ONVIF/IPC test /RTSP play /Client APK |
| Rapid Video | Auto view video, create testing report |
| HIKVISION Test Tool | Batch activate HIKVISION cameras, modify IP/password, customize channel name, H.264/H.265 video, wide dynamic mode, factory restore |
| DAHUA Test Tool | Batch activate DAHUA cameras, modify IP/username/password, customize channel name |
| HD Coaxial Test (TVI) | 8MP TVI camera test, 3840 x 2160P 12.5/15 FPS, UTC control/OSD menu |
| HD Coaxial Test (CVI) | 8MP CVI camera test, 3840 x 2160P 12.5/15 FPS, UTC control/OSD menu |
| HD Coaxial Test (AHD) | 8MP AHD test, 3840x2160P 15 FPS, UTC control/OSD menu |
| Auto HD App | Auto recognize HD coax camera type/resolution, snapshot, video record/playback, coaxial PTZ & OSD menu |
| HDMI Input | 1 channel HDMI input, support 4K 30FPS (various resolutions) |
| VGA Input | 1 channel VGA input, support 2048 x 1152 60FPS (various resolutions) |
| Zoom Image | 4x zoom, screen snapshot, record, save, view and playback |
| DC12V/3A Power Output | Output DC12V/3A, temporary power for camera |
| PoE Power Output | 48V PoE power output, max 25.5W |
| UTP Cable Test | Test UTP cable connection status, detect near-end, mid-end, far-end fault point of network cable crystal head |
| RJ45 TDR Cable Test | Test cable pair status, length, attenuation, reflectivity, impedance, skew, create test report. Measurement range 180M. |
| Tester Play | Screen projection: Tester, mobile phone (Android), and PC display simultaneously |
| Network Test | Trace route, Link monitor, DHCP server, port flashing, Ping test |
| Wi-Fi | Built-in WIFI, speeds 150M, display wireless camera image |
| Audio Test | 1 channel audio signal input, test whether sound normal |
| Power Management | Display DC 12V input & output voltage and power in real time |
| Data Monitor | Captures and analyzes command data, can send hexadecimal |
| External Power Supply | DC 12V 1A |
| Battery | Built-in Lithium ion battery (7.4V / 3350mAh) |
| Rechargeable | After charging 3-4 hours, normal working time 5 hours |
| Operation Setting | OSD menu, multi-language support (English, Chinese, Korean, Russian, Italian, French, Polish, Spanish, Japanese, Deutsch, Turkish, Portuguese, Czech etc) |
| Auto Off | 1-30 (mins) |
| Working Temperature | -10℃ to +50℃ |
| Working Humidity | 30%-90% |
| Dimension/Weight | 183mm x 110mm x 36.5mm / 0.8kg |
Note: Features marked with an asterisk (*) may be customizable.
10. User Tips
- For optimal battery life, avoid frequently fully discharging the device. Charge it when the battery indicator is low.
- When performing cable tests, ensure the remote kit is properly connected to the far end of the cable for accurate results.
- Utilize the 'Rapid ONVIF' and 'IPC test pro' features for quick setup and diagnosis of IP cameras, as they automate many discovery and power functions.
- Regularly update the device software to benefit from performance improvements and new camera compatibility.
- The built-in flashlight is very useful in dimly lit installation environments.
11. Warranty and Support
NOYAFA provides a standard warranty for this product. For detailed warranty information, technical support, or service inquiries, please refer to the official NOYAFA website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
Product Video Overview:
Video 1: NOYAFA NF-IPC715 Product Demonstration