1. Introduction
This high-power industrial control suit series adopts ASK communication mode and other control methods, featuring strong data transmission stability, high receiving sensitivity, long distance, strong anti-interference ability, etc. The product has large output power, supports multiple working mode switching and wiring modes, and has a very broad application prospect in household and industrial applications.
It is mainly used in electric doors, windows, lifting equipment, gateways, elevators, industrial control, and security industries.



2. Specifications
2.1. Remote Control (Transmitter)
| Parameter | Value |
|---|---|
| Model Number | AK-GK06TX-6 |
| Material | ABS |
| Working Voltage | DC 9V (9V Stacked battery) |
| Working Current | 50mA |
| Frequency | 433 MHz |
| Transmission Distance | 300m (Opening area), up to 2000m long-distance |
| Modulation | ASK |
| Protection | Fall prevention/compression resistance, waterproof |
| Size/Weight | 150*49*29mm / 118g |
| Remote Button | 6 digital buttons |

2.2. Receiver
| Parameter | Value |
|---|---|
| Model Number | AK06S-AC |
| Material | PC/High temperature resistance |
| Working Voltage | AC 100-265V |
| Output Current | 1CH ≤ 10A |
| Stand-by Current | ≤10mA |
| Receiving Sensitivity | -105dBm |
| Frequency | 433 MHz (Customized 315MHz also available) |
| Working Temperature | -20 to 70℃ |
| Modulation | ASK |
| Size/Weight | 92*65*32mm / 197g |
| Certification | CE, FCC |


3. Installation & Wiring
For your safety and to avoid electric shock, please disconnect the power before wiring.
3.1. General Wiring Diagram

3.2. Control AC Power Wiring
Connect the AC power input (100-265V) to the receiver and connect your AC loads to the output terminals as shown in the diagram below.

3.3. Control DC Power Wiring
Connect the AC power input (100-265V) to the receiver and your DC power source and loads to the appropriate terminals as shown.

3.4. AC Motor Forward and Reverse Rotation Wiring
This diagram illustrates how to wire the receiver to control an AC motor for forward and reverse rotation using two AC contactors. The instantaneous power of the motor when starting is large, up to 5-7 times of the rated power. When the power of the connected motor exceeds 200W, it must be used with an AC contactor, otherwise the controller may be damaged.

4. Operation
4.1. Working Modes
The receiver supports several working modes:
- Momentary Mode: After learning the code of a single key on the remote control, press the key, the relay will be closed. Release the key, the relay will open.
- Latching Mode: After learning the code of a single key on the remote control, press the key, the relay will be closed. Press the same key again, the relay will open.
- Toggle Mode: After learning the code of two keys on the remote control, press key 1, the corresponding relay will be closed. Press key 2, the corresponding relay will be closed, and other relays will open.
4.2. Code Pairing
To pair the remote control with the receiver, follow these steps based on the desired working mode:
- Momentary Mode:
- Keep pressing the learning key on the controller. The buzzer of the controller will sound continuously.
- Then, press key 1 of the remote control to send a valid signal.
- The buzzer stops sounding after the controller receives the signal, indicating that learning code is successful. The working mode is momentary for keys 1-6 of the remote control.
- Latching Mode:
- Keep pressing the learning key on the controller. The buzzer of the controller will sound continuously.
- Then, press key 3 of the remote control to send a valid signal.
- The buzzer stops sounding after the controller receives the signal, indicating that learning code is successful. The working mode is latching for keys 1-6 of the remote control.
- Toggle Mode:
- Keep pressing the learning key on the controller. The buzzer of the controller will sound continuously.
- Then, press key 2 of the remote control to send a valid signal.
- The buzzer stops sounding after the controller receives the signal, indicating that learning code is successful. The working mode is toggle for keys 1-6 of the remote control.
- 3-CH Momentary, 3-CH Latching Mode:
- Keep pressing the learning key on the controller. The buzzer of the controller will sound continuously.
- Then, press key 4 of the remote control to send a valid signal.
- The buzzer stops sounding after the controller receives the signal, indicating that learning code is successful. The working mode is momentary for keys 1, 2, and 3, and latching for keys 4, 5, and 6.
- 3-CH Momentary, 3-CH Toggle Mode:
- Keep pressing the learning key on the controller. The buzzer of the controller will sound continuously.
- Then, press key 5 of the remote control to send a valid signal.
- The buzzer stops sounding after the controller receives the signal, indicating that learning code is successful. The working mode is momentary for keys 1, 2, and 3, and toggle for keys 4, 5, and 6.
- 3-CH Toggle, 3-CH Latching Mode:
- Keep pressing the learning key on the controller. The buzzer of the controller will sound continuously.
- Then, press key 6 of the remote control to send a valid signal.
- The buzzer stops sounding after the controller receives the signal, indicating that learning code is successful. The working mode is latching for keys 1, 2, and 3, and toggle for keys 4, 5, and 6.
4.3. Code Clearing
To clear all paired codes from the receiver:
- Keep pressing the learning key on the controller for 8 seconds. The buzzer will ring continuously until it stops, indicating successful code clearing.
5. Maintenance
- Ensure the remote control battery (9V stacked battery) is replaced when the transmission range decreases or the indicator light dims.
- Keep the receiver unit clean and free from dust and moisture to ensure optimal performance.
- Regularly check wiring connections for any signs of wear or damage.
- The flame-retardant shell provides protection; however, avoid exposing the unit to extreme temperatures or direct impact.
6. Troubleshooting
- No response from receiver:
- Check if the receiver is powered correctly (AC 100-265V).
- Ensure the remote control battery is not depleted.
- Verify that the remote control and receiver are properly paired (refer to Section 4.2).
- Check for obstructions or excessive distance between the transmitter and receiver.
- Intermittent control:
- This could be due to environmental interference. Try repositioning the receiver or transmitter.
- Ensure the antenna on the receiver is securely connected and unobstructed.
- Motor not operating correctly (forward/reverse):
- Review the motor wiring diagram (Section 3.4) carefully.
- Ensure AC contactors are correctly installed and functioning if the motor power exceeds 200W.
- Buzzer sounds continuously during pairing:
- This indicates the receiver is in learning mode. Proceed with pressing the desired key on the remote control.
7. User Tips
- For applications requiring precise control, consider testing each working mode (Momentary, Latching, Toggle) to determine the best fit for your specific needs before final deployment.
- When installing the receiver, ensure it is placed in a location with minimal metal obstructions to maximize the wireless transmission range.
- Always double-check wiring connections before applying power to prevent damage to the unit or connected equipment.
8. Warranty & Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.