LEHX L6Pro

Contents

LEHX L6Pro Android Auto Car Radio Multimedia Carplay 14 User Manual

Model: L6Pro

Brand: LEHX

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your LEHX L6Pro Android Auto Car Radio Multimedia Carplay 14. Please read this manual thoroughly before use to ensure proper functionality and to avoid damage.

The LEHX L6Pro is designed for Chevrolet Silverado 3 GMTK2 models from 2014 to 2018, offering advanced features such as Android Auto, Apple CarPlay, GPS navigation, Wi-Fi, Bluetooth 5.1, and a high-resolution display.

LEHX L6Pro head unit installed in a Chevrolet Silverado 3 dashboard

Figure 1: LEHX L6Pro Head Unit installed in a Chevrolet Silverado 3 Dashboard.

2. Before Installation

Before proceeding with installation, it is recommended to test the unit to ensure it functions correctly after transit. Do not install the product directly into the car without testing, as long journeys may affect its performance.

2.1. BOSE Sound System Compatibility

It is crucial to identify if your vehicle is equipped with a BOSE sound system before purchasing and installing the unit. This will determine the correct style (A or B) of the head unit required for compatibility.

Diagram showing car speaker styles for BOSE and non-BOSE systems

Figure 2: Speaker styles for vehicles with and without BOSE sound systems. Style A is for no BOSE speakers, Style B is for with BOSE speakers.

3. Package Contents

The package includes the main head unit and various accessories depending on the series (LQ/L6X/L6 Plus or L5 Pro/L6 Pro). Please verify all components are present before installation.

Diagram of accessories for LQ/L6X/L6 Plus and L5 Pro/L6 Pro series

Figure 3: Accessories for different series. LQ/L6X/L6 Plus series includes Power Cable, RCA Input/Output, Camera Input/BT Antenna, 2 USB Cables, GPS Antenna, and CAN BUS. L5 Pro/L6 Pro series includes Power Cable, RCA Input/Output, Camera Input/BT Antenna, 2 or 3 USB Cables, GPS Antenna, 4G Antenna, Audio Out, and CAN BUS.

4. Installation

4.1. Rear Interface Description

Familiarize yourself with the rear interface of the head unit and the wiring connections.

Rear interface wiring diagram for the head unit

Figure 4: Rear Interface Wiring Diagram. Key connections include Power Plug (White/black striped for front speaker, Gray/black striped for rear speaker, Green/black striped for rear speaker, Purple/black striped for rear speaker), GND (Ground Wire/B-), BATTERY (Constant Power Supply +12V), ACC (Ignition Switch), ILLUMINATION (Illuminate Backlight), REVERSE (Reversing camera control line), KEY2 (Steering Wheel Control-2), KEY1 (Steering Wheel Control-1), ANT (Auto Antenna Power).

Important Wiring Notes:

  • When the yellow B+ line and the red ACC line have a 12V positive power simultaneously, the unit can be turned on normally.
  • The yellow B+ line maintains power, and the machine has a memory function.
  • Speaker cables (8 total): Each cable must not be grounded, shared, or touch other lines. Otherwise, there will be no sound output, distorted sound, or overheating.

4.2. CANBUS Connection

The CANBUS box is used for integrating the head unit with your vehicle's existing systems. Ensure correct connection based on your car's configuration.

CANBUS connection diagram for high-end and low-end model cars

Figure 5: CANBUS Connection. For high-end models, disconnect and then connect CANBUS. For low-end models, connect and then disconnect. If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

4.3. Reversing Camera Installation

Follow these steps to install the reversing camera:

  1. Find the reverse control line on the unit's power line (usually a pink line). Connect this line to the positive 12V pole, and the screen will turn blue.
  2. Locate the CAM video input interface on the back of the unit. Identify the positive and negative poles of the backup light.
  3. The camera has two sockets: the red socket connects to the power cable, the yellow inserts into the video cable. The red wire of the power cable and the video cable are screwed together to the positive pole of the reverse lamp. The black wire of the power cable is not used. The other end of the video cable connects to the CAM video input interface on the back of the unit. The red line from the video cable connects to the reversing control line of the power line.

Note: If the reversing camera is not installed, do not connect the REVERSE/BACK cable anywhere. Leave it unconnected to prevent incorrect display or automatic reverse mode activation.

Wiring diagram for reversing camera installation

Figure 6: Reversing Camera Wiring Diagram. 1) Yellow cable to navigation reversing video input socket. 2) Red cable to reverse detection line (BACK or REVERSE). 3) Connect camera wires 3 and 4 together to the positive pole of the reverse light power supply. 4) Black cable 5 to ground or negative pole of reverse light power supply.

5. Operation

5.1. Learning Steering Wheel Controls

To configure steering wheel controls:

  1. Press and hold a button on your car's original steering wheel.
  2. Find the corresponding button icon on the head unit's screen.
  3. Click the icon to change its color, indicating successful learning.
Diagram for learning steering wheel controls

Figure 7: Steering Wheel Control Learning Interface. Press and hold a steering wheel button, then select the corresponding icon on the screen to assign the function.

5.2. Apple CarPlay and Android Auto

The head unit supports both wired and wireless Apple CarPlay and Android Auto. Note that Google Play services may be required locally for Android Auto.

Apple CarPlay and Android Auto interfaces

Figure 8: Apple CarPlay and Android Auto interfaces on the head unit.

Wired Connection: Connect your phone via a USB data cable. The head unit will automatically enter the CarPlay/Android Auto interface.

Wireless Connection:

  1. Enable Bluetooth and Wi-Fi on your mobile phone.
  2. Connect to the head unit's Bluetooth.
  3. The head unit will automatically enter the CarPlay/Android Auto interface. (Note: The signal is transmitted via Wi-Fi, so it will work even if Bluetooth is turned off. If Wi-Fi is turned off, CarPlay/Android Auto will disconnect.)

5.3. Split Screen Functionality

The head unit supports split-screen mode, allowing you to run two applications simultaneously, such as navigation and music, or DVR and music.

Examples of split screen functionality

Figure 9: Split Screen examples showing Maps with DVR, Maps with Music, DVR with Music, and Adjustable Button Color settings.

5.4. Digital Sound Processor (DSP)

The LEHX Pro features a 5.1 channel DSP with DTS HiFi digital audio authorization, providing surround sound, Trubass, and Phantom Center modes for an enhanced audio experience.

DSP settings interface for sound customization

Figure 10: DSP Settings Interface. Adjust surround sound, bass enhancement, and other audio parameters for optimal sound quality.

5.5. Bluetooth 5.1

The built-in Bluetooth 5.1 system supports mobile phone pairing, music streaming, hands-free dialing, and clear calls, ensuring driving safety.

Bluetooth phone call interface

Figure 11: Bluetooth Phone Call Interface. Allows hands-free communication.

5.6. Video Playback

The unit supports video playback from various sources. For rear seat entertainment, an optional USB adapter may be required for headrest screen connections, especially for 8-core models.

Video output function showing rear screens

Figure 12: Video Output Function. Note that the video output function may require the purchase of additional accessories.

5.7. 4G LTE and External SIM Slot

The L6 Pro supports 4G LTE connectivity. It features an external SIM card slot, allowing for the installation of two SIM cards: an integrated SIM card and a SIM card in an external cable.

External SIM card slot on the L6 Pro

Figure 13: External SIM Card Slot. Supports dual SIM card installation.

5.8. Optional Accessories (Sold Separately)

  • ADAS DVR: Provides 1080P video recording and clear night vision, with collision warnings and lane departure reminders.
  • ADAS DVR camera for L6 Pro

    Figure 14: ADAS DVR Camera. Provides driving assistance and recording.

  • TPMS (Tire Pressure Monitoring System): Real-time visualization of tire pressure and temperature, with immediate alarms if limits are exceeded.
  • TPMS interface showing tire pressure and temperature

    Figure 15: TPMS Interface. Displays real-time tire data and alerts.

  • OBD2: Supports Vgate Icar2 Bluetooth for engine diagnostics and tools.
  • OBD2 diagnostic interface

    Figure 16: OBD2 Diagnostic Interface. Provides engine management diagnostics.

  • DAB+ Tuner: For high-quality digital audio broadcasting channels.
  • DAB+ radio receiver stick

    Figure 17: DAB+ Radio Receiver Stick. Connects via USB for digital radio.

6. Troubleshooting

6.1. Cannot Boot Normally

  1. Wiring Issue: If the yellow (B+), red (ACC), and black (Ground) wires are not connected correctly, or if only two are connected, the unit will not boot. Ensure yellow is connected to positive, red to key control, and black to negative.
  2. Incorrect Wiring: If the original car's wiring and the unit's wiring colors do not match, connecting them directly may cause damage or prevent booting.
  3. Original Car Plug: The original car plug cannot be directly plugged into the new unit.
  4. Fuse Blown: If the 3 wires are connected correctly but it doesn't boot, check the fuse on the yellow line. If the fuse is fine, twist the yellow and red wires together, turn on the key, and press the power button.
  5. Repeated Fuse Blowing: If the fuse blows repeatedly, it indicates a short circuit in the unit's protection circuit. The unit may require repair.

6.2. Automatic Shut-down

  1. Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, automatic shutdown will occur. Follow correct wiring methods.
  2. Unstable Voltage: Find a 12V-5A power supply and re-test. If it still shuts down automatically, the unit has a problem.

6.3. Noise Issues

  1. Low Speaker Power: If the original speaker power is too low, increasing the unit's volume will cause noise. Avoid excessively high volumes.
  2. Grounded Speaker Cable: Ensure the speaker cable is not grounded. Connect the iron speaker cable directly to the unit's speaker cable.

6.4. Remote Control Not Working

Test by pointing the remote control at a mobile phone camera and pressing a button. If the phone's screen lights up, the remote is working. If not, replace the battery.

6.5. Settings Not Saved (No Memory)

  1. Incorrect Connections: The yellow and red lines might be connected together (separate yellow to positive, red to key control).
  2. Reversed Connections: Yellow and red wires might be reversed. Simply swap their positions.

6.6. Bluetooth Not Working

Turn on the machine, search for its Bluetooth name on your mobile phone, and connect. After connecting, you should be able to make calls or play music via Bluetooth.

6.7. Product Emits Smoke

Replace the FUSE. If the problem persists, the internal circuit is burned, and after-sales service is required.

6.8. Sound Cannot Be Adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. If the volume knob is broken, it may need replacement.

6.9. Reversing Camera Not Displaying

  1. Incorrect or Missing Wiring: Refer to section 4.3 for correct wiring.
  2. Broken Camera: If the lamp connected to the camera does not light up, the camera may be broken and needs replacement.

6.10. USB Devices Not Playing

Format the USB flash drive to FAT32. Re-download songs and try again. If it still doesn't work, replace the USB flash drive.

6.11. FM Radio Not Receiving Stations

  1. Antenna Connection: Ensure the antenna plug is fully inserted, and the antenna or line is not disconnected.
  2. Station Search: Use the 'AS' button for automatic search or manually search using the 'before' or 'after' buttons.
  3. If the above doesn't resolve the issue, unplug the antenna plug and insert a screwdriver or metal strip in its place to test.

6.12. No Sound Immediately After Installation

If there is no sound, it's usually a wiring error or a short-circuited original car speaker wire. Check if the speaker cable is short-circuited and reconnect if necessary. Verify the number of speaker cables matches the original car's configuration; if only 2 speaker cables are present, you may need to re-route the original car line (one speaker needs 2 wires, 2 speakers need 4 wires).

6.13. No Sound After A While

Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple tail lines of the unit. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

7. Specifications

AttributeValue
High-concerned chemicalNone
Warranty1 year
Is touch screenYes
Built-in ScreenYes
TF/Micro SD Slot0
DinDouble Din
RAM6G
InterfaceFor CHEVROLET
Operating SystemAndroid
Out Power50x4
Voltage12 V
Item Weight1.7kg
Max External Memory256G
Special Featureswifi function,Support steering wheel control,Support 4G Network,Built-in GPS,Mobile Phone,MP3 players,Voice Control,dsp,CarPlay,android auto,Reversing Input,Split Screen
Digital Media FormatCD,DVD-R/RW,DVD-RAM,VIDEO CD,Mp3,MP4,WMA,JPEG
OSD LanguageChinese (Simplified),Chinese (Traditional),albanian,Arabic,Azeri,Irish,ESTONIAN,Bulgarian,Icelandic,Polish,PERSIAN,Boolean text (Dutch South Africa),Danish,German,French,Filipino,Finnish,Georgian,Haitian Creole,Korean,Dutch,Galicia,Catalan,czech,Croatian,Latin,Latvian,Lithuanian,Romanian,Maltese,Malay,Macedonian,Norwegian,Portuguese,Japanese,Swedish,Serbian,Slovak,Slovenian,Swahili,THAI,Turkish,Welsh,Ukrainian,Hebrew,Greek,Spain's Basque,Spanish,hungarian,Armenian,Yiddish,hindi,Urdu India,indonesia,English,Vietnamese
ResolutionQLED 2000*1200
Display Size10.1"
Brand NameLEHX
OriginMainland China
For Vehicle Brands/ModelCHEVROLET
Chevrolet ModelSILVERADO
ROM128G
CertificationCE
MaterialAbs+
built-inMicrophone
AV OUTWiFi version support
Subwoofersupport
Model/brandFor Chevrolet Silverado 3 GMTK 2 (2013-2019)
Carplaysupport
Android autosupport

8. User Tips

  • Voice Activation: To activate Toppal Voice, ensure you have purchased an activation code. If your machine doesn't use the pro version or recognize commands, check the validity period of your pro version and renew if necessary.
  • Camera Compatibility: If connecting an original reverse camera, ensure the wiring is compatible with the head unit's input to avoid modifications.
  • Professional Installation: It is highly recommended that installation be performed by professionals to prevent damage to the car dashboard or the device.

9. Support

For further assistance or inquiries, please contact LEHX customer service. You can find additional resources and contact information via the following channels:

  • User Manual (PDF): A detailed user manual is available in PDF format. View User Manual (PDF)
  • Product Demonstration Video: Watch a video showcasing the features and user interface of the LEHX L6Pro.
  • Video 1: LEHX L6Pro Product Demonstration, showcasing UI, navigation, music, equalizer, OBD, TPMS, Bluetooth, split screen, YouTube, Google Play, wallpaper, video output, and radio functions.

  • Online Support: Scan the QR codes below to connect with LEHX customer service via WhatsApp, TikTok, or Instagram for direct assistance.
  • QR code for Engine WhatsAppQR code for TikTokQR code for Instagram @LEHXCARRADIO

    Figure 18: Support QR Codes for WhatsApp, TikTok, and Instagram.

© 2023 LEHX. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.