KCEVE 8202DH

Contents

KCEVE 8K HDMI KVM Switch (4 In 2 Out) User Manual

Model: 8202DH

1. Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Warning: To prevent electric shock, do not open the enclosure. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
  • Warning: Ensure all connected computers and peripherals are powered off before connecting or disconnecting cables to prevent potential damage.
  • Caution: Do not expose the device to extreme temperatures, direct sunlight, or high humidity. Keep away from water sources to avoid short circuits.

2. Setup Instructions

Follow these steps to properly set up your KVM switch:

  1. Before First Use: Remove all protective films from the device.
  2. Connect the provided USB cable to a certified 5V power adapter for power supply.
  3. Power down all connected computers and peripherals.
  4. Connect your keyboard, mouse, and monitor(s) to the Console ports on the KVM Switch.
  5. Connect the KVM cables (HDMI and USB) from the CPU ports on the switch to the corresponding ports on each computer. Ensure both HDMI and USB cables are plugged in for audio, power, and data transmission.
  6. Power on the computers, then power on the monitor(s).
Connection diagram showing 4 PCs connected to 2 monitors, keyboard, mouse, printer, U-disk via KVM switch.
Figure 1: KVM Switch Connection Diagram. Each computer requires two HDMI connections for dual monitor output. Ensure all components support 4K or 8K resolution for optimal display.
KVM Switch packing list and dimensions.
Figure 2: KVM Switch Package Contents and Dimensions.

3. Operating Instructions

The KVM switch offers flexible control and display modes:

3.1 Power On/Off and Mode Switching

  • To turn on the device: Press and hold the power button for 3 seconds.
  • To change modes (switch between connected PCs): Short press the power button on the front panel or use the wired remote control.
Two methods for switching between computers: physical button on the KVM switch and a wired remote control.
Figure 3: KVM Switch Switching Methods (Physical Button and Wired Remote).

3.2 Display Modes (Windows OS)

To set the output mode in Windows OS, press the "Windows" key + "P" simultaneously. You can choose between Duplicate or Extend mode:

  • Duplicate Mode (Mirror Mode): Both monitors will display the same image simultaneously from the selected PC.
  • Extend Mode: The working window from the main screen can be dragged to the second output screen by mouse, allowing the mouse to move across both monitors.
Diagram showing Extended Mode and Copy Mode (Duplicate Mode) for dual monitors, with instructions to press Windows + P.
Figure 4: Setting Display Modes (Duplicate and Extend) in Windows OS.
Video 1: How to set the output mode in Windows OS (Duplicate and Extend).

3.3 EDID Emulator Functionality

The KVM switch includes EDID emulators in each input port. This feature ensures that your computers always maintain correct display information when switching back, preventing display issues like resolution changes or flickering.

Comparison of display stability with and without EDID Emulator. With emulator, display remains correct after switching. Without, display may reset or flicker.
Figure 5: Benefit of EDID Emulator for stable display switching.

4. Maintenance

  • To clean the device, use a soft, dry cloth. Do not use liquid or aerosol cleaners.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
  • Keep the device away from water sources to prevent short circuits.
  • When not in use, turn off the device and store it in a dry place.

5. Troubleshooting

  • No Display / Incorrect Resolution:
    • Ensure all HDMI cables are securely connected.
    • Verify that each computer has two HDMI connections to the KVM switch for dual monitor output.
    • Confirm that your computer, monitor, and HDMI cables all support the desired resolution (e.g., 4K or 8K).
    • If using 8K resolution, ensure you are using 8K HDMI cables.
    • Check display settings in your operating system (Windows + P) to ensure the correct display mode (Duplicate or Extend) is selected.
  • Peripherals Not Responding:
    • Ensure the USB cables from the KVM switch are connected to the computers.
    • Verify that the KVM switch is powered on.
    • Try connecting the peripheral directly to the computer to rule out device issues.
  • Display Flickering or Instability:
    • The built-in EDID emulators should prevent most display instability. If issues persist, ensure all cables are high quality and properly seated.
    • Try updating graphics drivers on your computers.

6. Specifications

Feature Detail
Product Name 2 Monitors 4 Computers KVM Switch
Model Number 8202DH (4 IN 2 OUT)
Brand KCEVE
Material Metal shell
Interfaces HDMI 2.0, USB 3.0
Resolution Support Up to 8K@60Hz, 4K@144Hz/120Hz, 4K@60Hz
Control Methods Physical buttons, Wired remote control
USB Ports 4 x USB 3.0 ports for peripherals (mouse, keyboard, U disk, scanner, printer, webcam, etc.)
EDID Emulator Included in each input port for stable display information
Compatibility Win10 / 8.1 / 8 / 7 / XP / Vista, Mac OS, Linux, Chrome OS (Plug and Play, drive-free)
Origin Mainland China
Certification CE, FCC, RoHS
Package Dimensions (approx.) Length: 20 cm, Width: 15 cm, Height: 6 cm
Weight (approx.) 0.85 kg
Image showing a family enjoying 8K content on a large TV connected via the KVM switch.
Figure 6: Enjoying High-Definition Resolution with the KVM Switch.

7. User Tips

  • Cable Quality: For optimal performance, especially with 4K or 8K resolutions, use high-quality HDMI cables that explicitly support these resolutions.
  • Dual Monitor Setup: Remember that each computer requires two HDMI connections to the KVM switch to enable dual monitor output.
  • Plug and Play: The KVM switch is designed for plug-and-play operation and does not require additional drivers for most operating systems (Windows, Mac OS, Linux, Chrome OS).
  • Desk Organization: Utilize the wired remote control to hide the KVM switch under your desk, keeping your workspace tidy.
  • EDID Emulators: The integrated EDID emulators ensure a smooth transition between computers without display resolution or arrangement issues.
Comparison of a tidy desk with a KVM switch versus a cluttered desk without one, highlighting the benefit of sharing peripherals.
Figure 7: KVM Switch for an Organized Workspace.

8. Warranty & Support

8.1 Manufacturer Information

Company Name: SHENZHEN YIJIARN DIGITAL TECHNOLOGY CO., LTD

Full Address: 1B-077, Phase II, South China International Leather Leather Raw Materials Logistics Zone, No. 1 South China Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen City, Guangdong Province

Email: Seven6683@163.com

8.2 EU Authorized Representative

AR Company Name: PROCONSEIL FR

Full Address: 8 bis rue Abel 75012 Paris, France

Email: SophieDupont@proconseilfr.com

8.3 Compliance Information

This product complies with the following EU Directives:

  • Electromagnetic Compatibility (EMC): EN 55032 / EN 55035
  • Low Voltage Directive (LVD) / RoHS: EN 62368-1 / Directive 2011/65/EU

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference...

For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.