1. Introduction
The CNC YCQ4-100E series Dual Power Automatic Transfer Switch (ATS) is a micro household power switch designed to ensure a continuous and reliable power supply. This device automatically detects the status of the main power supply and, if an abnormality is detected, seamlessly switches to a standby power source. This ensures the continuity, reliability, and safety of the electrical supply to your connected loads.
This product is specifically designed for domestic track installation and is ideal for use in PZ30 distribution boxes. The ATS features a solid structure, reliable conversion mechanism, easy installation, and a long operational life. It is suitable for 50 or 60Hz rated 400V AC emergency power supply systems and complies with the IEC60947-6-1 standard for low-voltage switching equipment and control devices.

2. Specifications
The YCQ4-100E ATS is available in various configurations (2P, 3P, 4P) and rated currents (63A, 100A). Key specifications are detailed below:
| Parameter | Value (100A) |
|---|---|
| Rated current Ie(A) | 16, 20, 25, 32, 40, 50, 63, 80, 100 |
| Insulation voltage Ui | AC690V, 50Hz |
| Rated voltage Ue | AC690V, 50Hz |
| Classification | PC class: can be manufactured withstood short circuit current |
| Utilization category | AC-33iB, AC-31B |
| Pole No. | 2P, 3P, 4P |
| Weight (kg) | 2P: 1.7, 3P: 2.1, 4P: 2.6 |
| Electrical life | Life: 2000 times (Manual operation: 5000 times) |
| Rated short circuit current Iq | 50KA |
| Short circuit protection device (fuse) | RT16-00-63A |
| Rated impulse withstand voltage | 8kV |
| Control circuit | Rated control voltage Us: AC220/50Hz, Normal working conditions: 85-110%Us |
| Auxiliary circuit | 2 relays, each with two sets of contact converter contact capacity: AC200V/50Hz Ie=5y |
| Conversion time of contactor | < 50ms |
| Operation conversion time | < 50ms |
| Return conversion time | < 50ms |
| Power off time | < 50ms |

Dimensions
- 2P Model: 108mm (Length) x 96mm (Height) x 60mm (Width)
- 3P Model: 124.8mm (Length) x 100mm (Height) x 76mm (Width)
- 4P Model: 142mm (Length) x 100mm (Height) x 76mm (Width)



3. Component Identification
Familiarize yourself with the main components of the YCQ4-100E ATS:

- Status position indication
- Main power terminal and passive signal (AC220V)
- Manual/automatic switch
- Manual handle
- Main terminal of common power side (Source A)
- Main terminal of standby power side (Source B)
- Main terminal of load connection side
- A power indicator
- B power indicator
- Standby power terminal and passive signal (AC220V)

4. Installation
4.1 DIN Rail Mounting
The YCQ4-100E ATS is designed for easy installation on a standard DIN rail, commonly found in PZ30 distribution boxes. Ensure the DIN rail is securely mounted before attaching the ATS.

4.2 Wiring Diagrams
Proper wiring is crucial for the safe and correct operation of the ATS. Refer to the specific wiring diagram for your model (2P, 3P, or 4P). Always ensure power is disconnected before performing any wiring.
4.2.1 YCQ4-100E 2P Wiring Diagram

4.2.2 YCQ4-100E 3P Wiring Diagram

4.2.3 YCQ4-100E 4P Wiring Diagram

5. Operation
The YCQ4-100E ATS offers both manual and automatic operation modes.
5.1 Automatic Mode
In automatic mode, the switch continuously monitors the main power supply (Source A). If the main power fails or becomes abnormal, the ATS will automatically switch to the standby power supply (Source B) within milliseconds (0.008 seconds / 8ms switching time). When the main power is restored, the ATS will automatically switch back to Source A.
To engage automatic mode, ensure the Manual/Automatic switch (Component 3 in Figure 6) is set to 'Auto'.
5.2 Manual Mode
In manual mode, you can manually switch between Source A and Source B using the manual handle (Component 4 in Figure 6). This mode is useful for testing or specific maintenance scenarios.
To engage manual mode, set the Manual/Automatic switch (Component 3 in Figure 6) to 'Manual'. Then, use the manual handle to select the desired power source.
5.3 Status Indicators
The ATS features status position indicators (Component 1 in Figure 6) and power indicators (Components 8 & 9 in Figure 6) to show the current power source and operational status.

6. Maintenance
The YCQ4-100E ATS is designed for long-term reliability with minimal maintenance. However, periodic checks are recommended:
- Visual Inspection: Regularly inspect the unit for any signs of physical damage, loose connections, or overheating.
- Terminal Tightness: Ensure all wiring terminals are securely tightened to prevent arcing or poor contact.
- Dust and Debris: Keep the unit free from dust and debris, especially around ventilation openings.
- Functional Test: Periodically test the automatic transfer function by simulating a main power failure (if safe and feasible) to ensure it switches correctly to the standby source.
For any complex issues or repairs, it is recommended to consult a qualified electrician.
7. Troubleshooting
This section provides guidance for common issues. For persistent problems, contact technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| ATS does not switch to standby power during main power failure. |
|
|
| ATS does not switch back to main power after restoration. |
|
|
| No power output from ATS. |
|
|
8. User Tips
- Always ensure that the total load connected to the ATS does not exceed its rated current capacity.
- For optimal performance and safety, have the installation performed by a certified electrician.
- Regularly check the status indicators to confirm the ATS is operating as expected.
9. Frequently Asked Questions (FAQ)
- Q: Is this product covered by a guarantee?
- A: For specific guarantee and warranty information, please refer to the 'Warranty and Support' section or contact your seller directly.
10. Warranty and Support
The CNC YCQ4-100E Automatic Transfer Switch is manufactured to high-quality standards. For detailed warranty terms, conditions, and duration, please refer to the documentation provided at the time of purchase or contact your authorized dealer or the manufacturer directly.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please reach out to the CNC Electric Quality Store or your local distributor.