1. Introduction
The Rocketek SCR10A is a high-performance USB 3.0/2.0 smart card reader designed for both desktop and mobile use. This versatile device supports a wide range of contact smart card operations, including online banking and digital signature applications. Additionally, it features integrated slots for various memory cards such as SD, Micro SD, and SIM cards.
It is compatible with Common Access Cards (CAC), Government IDs, National IDs, and chip cards issued by banks and post offices across many countries.
2. Setup Instructions
- Plug and Play: The Rocketek SCR10A offers easy USB 2.0/3.0 Plug and Play installation. Simply connect the device to an available USB port on your computer.
- Driver Installation: For full functionality, especially with smart cards, drivers may be required. Drivers for the card reader are available on the official Rocketek website: rocketek.hk/downloads.
- Smart Card Specific Drivers: The Rocketek card reader acts as a bridge. While Rocketek provides drivers for the card reader itself and editable software for SIM cards, it does not provide drivers or editable software for specific smart cards like bank cards or ID cards. These are dependent on the regulations of your country and the issuing bank. If you need to read such cards, please contact the smart card provider for information on how to download, install, and use their specific drivers/software.
- DOD and USG Users: Users requiring Common Access Card (CAC) functionality for Department of Defense (DOD) and U.S. Government (USG) applications will need a third-party CACEnabler program.
- SIM Card Compatibility: Please note that SIM card functionality is currently compatible with Windows operating systems only. Mac OS and Linux do not support SIM card operations with this device.
3. Operating Instructions
Once the Rocketek SCR10A is connected and necessary drivers are installed, you can begin using it with your desired cards.
3.1. Inserting Cards
- Smart Cards (CAC, ID, Bank Cards): Insert the smart card into the designated smart card slot with the chip facing upwards and towards the reader.
- SD/Micro SD/TF Cards: Insert the memory card into the appropriate slot until it clicks into place.
- SIM Cards: Insert the SIM card into its dedicated slot. Remember, SIM card functionality is Windows-only.
3.2. General Operation
- The reader features automatic detection of smart card types and movement detection with auto power-off for energy efficiency.
- Use the reader for various applications such as online banking, digital signatures, network ATM transfers, payment processing, balance inquiries, tax payments, utility bill payments, credit card bill payments, and cash card payments.
- It supports a wide array of specific applications including ActivClient, AKO, OWA, DKO, JKO, NKO, BOL, GKO, Marinenet, AF Portal, Pure Edge Viewer, ApproveIt, DCO, DTS, LPS, and Disa Enterprise Email.
4. Maintenance
- Keep the card reader clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Handle the card reader with care. Its slim and portable design makes it convenient for travel, but avoid dropping or subjecting it to physical shock.
- Ensure cards are inserted correctly and gently to prevent damage to the card slots.
5. Troubleshooting
- Device Not Recognized: Ensure the USB cable is securely connected to both the card reader and your computer. Try a different USB port or a different computer to rule out port issues.
- Cannot Read ID Card or Bank Card: If the Rocketek card reader driver is installed but you cannot read specific ID or bank cards, it is likely that the necessary drivers or editable software for those particular smart cards are missing. As mentioned in the setup instructions, these specific drivers must be obtained from the smart card provider (e.g., your bank or government agency). The Rocketek reader functions as a hardware interface, not a software solution for all card types.
- SIM Card Not Working on Mac/Linux: SIM card functionality is currently supported only on Windows operating systems. This is a known limitation.
- Slow Data Transfer: Ensure you are using a USB 3.0 port on your computer for optimal transfer speeds if you have the USB 3.0 version of the reader. USB 2.0 ports will limit speeds to 480Mbps.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Rocketek |
| Model Number | SCR10A |
| Chipset | GL3324 |
| Interface | USB (USB 3.0 / USB 2.0 variants available) |
| Installation | External |
| Card Slots | All in 1 / Multi in 1 |
| Card Compatibility | Micro SD, SD, SIM, Smart Card, Memory Stick Card, TF Card |
| Supported Capacity | Max 512GB |
| Smart Card Types | ISO 7816 Class A, AB and C (5V, 3V and 1.8V) |
| Certifications | EMV2 2000 Level 1, CE, FCC, VCCI, CCID, Microsoft WHQL |
| Operating System Support | Windows 10, 8, 7, Vista, XP, 2000, 2003, 2008, ME, Mac OS, Linux |
| Dimensions (L*W*H) | 85mm * 33mm * 15mm |
| USB 3.0 Speed | Up to 5120Mbps |
| USB 2.0 Speed | Up to 480Mbps |
7. User Tips
- Always ensure you have the correct drivers installed for both the card reader and any specific smart cards you intend to use. This is the most common reason for functionality issues.
- For optimal performance, especially with high-speed memory cards, connect the USB 3.0 version of the reader to a USB 3.0 port on your computer.
- If you encounter issues with a smart card, verify that the card is inserted correctly and that the chip is clean.
- Keep the Rocketek website (rocketek.hk/downloads) bookmarked for easy access to updated drivers or support information.
8. Warranty and Support
The Rocketek SCR10A Smart Card Reader comes with a 1-year warranty from the date of purchase.
For technical support, driver downloads, or further assistance, please visit the official Rocketek website at rocketek.hk/downloads.