Introduction
This manual provides instructions for the replacement of the LCD display and touch screen digitizer assembly for UMIDIGI Bison series smartphones. This product is designed to restore full display and touch functionality to your device. Please read all instructions carefully before proceeding with installation.
Setup and Installation
Replacing a smartphone screen requires precision and care. If you are not confident in your ability to perform this repair, it is recommended to seek professional assistance.
Before You Begin
- Ensure your phone is powered off completely.
- Disconnect the battery before removing any components.
- Work in a clean, well-lit, and static-free environment.
- Have all necessary tools ready. The kit typically includes screwdrivers, pry tools, and a suction cup.
- Visually inspect the new screen for any damage before installation.

Image: UMIDIGI Bison LCD Display and Touch Screen Digitizer with included tools.
Installation Steps (General Guide)
- Disassembly: Carefully open your phone. This usually involves heating the edges to soften adhesive, then using pry tools to separate the back cover or screen assembly. Refer to specific guides for your UMIDIGI Bison model for detailed disassembly steps.
- Disconnect Old Screen: Locate and disconnect the flex cables connecting the old screen to the motherboard. Also, remove any screws or brackets securing the old screen.
- Remove Old Screen: Gently remove the old, damaged screen from the phone frame. Clean any remaining adhesive from the frame.
- Test New Screen: Before fully installing the new screen, connect its flex cables to the motherboard (without applying adhesive). Power on the phone and test the display and touch functionality thoroughly. Check for dead pixels, touch responsiveness across the entire screen, and display clarity.
- Full Installation: If the new screen functions correctly, power off the phone. Apply new adhesive to the phone frame. Carefully position the new screen assembly into the frame, ensuring all flex cables are properly connected and secured.
- Reassembly: Reconnect the battery and reassemble your phone, reversing the disassembly steps.
- Final Check: Power on your phone and perform a final check of all functions.
Video: Demonstration of screen functionality testing before full installation.
Caution: Improper installation can damage your device. Proceed with care or seek professional help.
Operating the Display
Once successfully installed, the new LCD display and touch screen digitizer will function identically to the original component. It provides a 6.3-inch FHD+ display with a resolution of 2160x1080 pixels and capacitive touch functionality.
- Display: The screen will show all visual content from your smartphone.
- Touch Input: The capacitive touch screen allows for multi-touch gestures, taps, and swipes for navigation and interaction with the device.
- Brightness and Color: Adjust brightness and color settings through your phone's operating system settings.
Maintenance
To ensure the longevity and optimal performance of your new display, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth, slightly dampened with water or a screen-specific cleaner, to gently wipe the screen. Avoid harsh chemicals or abrasive materials.
- Protection: Consider using a screen protector (tempered glass or film) to guard against scratches and minor impacts.
- Avoid Impact: Protect your phone from drops and impacts, which can damage the screen.
- Temperature: Avoid exposing the phone to extreme temperatures, as this can affect display performance and lifespan.
- Pressure: Do not apply excessive pressure to the screen, as this can cause internal damage.
Troubleshooting
If you encounter issues after installation, consider the following:
- No Display/Black Screen:
- Ensure all flex cables are securely connected to the motherboard.
- Check for any kinks or damage to the flex cables.
- Verify the battery is properly connected and charged.
- Unresponsive Touch:
- Ensure the touch digitizer flex cable is correctly seated.
- Restart the phone.
- Check for any debris or liquid under the screen that might interfere with touch.
- Display Artifacts (Lines, Spots, Discoloration):
- This could indicate a faulty screen or a damaged flex cable. Re-check connections.
- If the issue persists, the screen may have a factory defect.
- Screen Flickering:
- Check flex cable connections.
- Ensure the screen is properly seated in the frame.
If troubleshooting steps do not resolve the issue, contact the seller for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Product Type | LCD & Touch Screen Digitizer Assembly |
| Compatible Models | UMIDIGI Bison, UMIDIGI Bison Pro, UMIDIGI Bison 2021, UMIDIGI BISON 2022 |
| Screen Size | 6.3 inches |
| Display Resolution | 2160*1080 (FHD+) |
| Touch Screen Type | Capacitive Screen |
| LCD Kit | Yes (includes LCD and digitizer) |
| Material | LCD |
| Certification | NONE |
| Package Weight | 0.119 kg |
| Package Dimensions | 30cm x 25cm x 20cm |

Image: Front and back view of the LCD display and touch screen digitizer assembly.
Warranty and Support
This product is typically covered by a free returns policy within 90 days. For specific warranty details, return procedures, or technical support, please contact the seller directly through your purchase platform. Ensure you retain your proof of purchase.
User Tips
- Many users have found this screen to be a perfect fit and relatively easy to install, successfully restoring their phones to working condition.
- Always perform a thorough functionality test of the new screen before applying any adhesive or fully reassembling your device. This helps identify any potential defects early.
- Take your time during installation. Rushing can lead to damage to the screen or other phone components.
- If you encounter any issues, double-check all connections before concluding the screen is faulty.