TNICER T1 Motorcycle Bluetooth Headset User Manual

1. Introduction

The TNICER T1 Motorcycle Bluetooth Headset is designed to enhance your riding experience by providing seamless communication, entertainment, and safety features. This manual will guide you through the setup, operation, and maintenance of your T1 headset, ensuring optimal performance and longevity.

2. Key Features

• 2-Way Intercom: Supports real-time communication between two riders up to 1000 meters in open terrain.
• Advanced Noise Reduction: Features DSP & CVC technology for high-quality sound and clear communication, even at speeds up to 120 km/h, while allowing ambient sound for safety.
• Music Sharing: Share your music with a riding partner within a 20-30 meter range.
• Long-Lasting Battery: Equipped with a 900mAh lithium polymer battery, offering up to 25 hours of music playback, 20 hours of intercom talk time, and 600 hours of standby.
• Universal Compatibility: Designed for universal pairing with most Bluetooth devices and helmet intercom brands.
• IP67 Waterproof: Built to withstand various weather conditions including dust, rain, storms, snow, and low temperatures down to -15°C.
• Automatic Phone Answering: For enhanced riding safety, calls are answered automatically.
• High-Definition EQ Sound Effects: Choose from POP, VOCAL, or ROCK sound profiles.
• FM Radio: Integrated FM radio for entertainment on the go.
• Voice Assistant: Access your device's voice assistant for hands-free control.
• Quick Charge: Efficient charging capability.

3. Package Contents

Please check the package for the following items:

• TNICER T1 Bluetooth Intercom Unit
• Helmet Speakers (wired to main unit)
• Microphone (boom or soft wire, depending on helmet type)
• Mounting Bracket (clip-on and/or adhesive)
• USB Charging Cable
• User Manual (this document)
• (Optional: Additional accessories for 2-set package)

4. Setup and Installation

4.1 Charging the Device

Before first use, fully charge the T1 unit. Connect the USB charging cable to the charging port on the T1 unit and to a standard USB power adapter (not included). The indicator light will show charging status and turn off when fully charged.

4.2 Mounting to Helmet

1. Choose a suitable location on the left side of your helmet.
2. Attach the mounting bracket using either the clip-on method (slide between helmet shell and padding) or the adhesive method (clean surface, peel backing, press firmly).
3. Slide the T1 intercom unit onto the mounted bracket until it clicks securely into place.
4. Install the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for optimal sound.
5. Attach the microphone to the helmet, positioning it close to your mouth for clear voice pickup.
6. Route all cables neatly under the helmet padding to avoid interference and ensure comfort.

4.3 Bluetooth Pairing with Phone

1. With the T1 unit powered off, press and hold the power button until the indicator light flashes red and blue, indicating pairing mode.
2. On your mobile phone, enable Bluetooth and search for new devices.
3. Select "TNICER T1" from the list of available devices.
4. Once paired, the indicator light on the T1 will flash blue slowly.

4.4 Intercom Pairing (for 2-Way Communication)

To establish a 2-way intercom connection between two T1 units:

1. Ensure both T1 units are powered on and not connected to any other Bluetooth devices.
2. On Unit A, press and hold the intercom button until the indicator light flashes red and blue rapidly.
3. On Unit B, press the intercom button once.
4. Both units will search for each other. Once connected, the indicator lights will flash blue slowly, and you will hear a confirmation tone.

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the power button for approximately 3 seconds until the indicator light turns blue.
• Power Off: Press and hold the power button for approximately 3 seconds until the indicator light turns red and then off.

5.2 Volume Control

Use the dedicated volume buttons (usually '+' and '-') on the T1 unit to adjust the audio level.

5.3 Music Playback and Sharing

• Play/Pause: Press the multi-function button once.
• Next Track: Double-press the '+' button.
• Previous Track: Double-press the '-' button.
• Music Sharing: While playing music, press the music sharing button (if available, or a specific combination) to share audio with a paired intercom unit. The sharing range is 20-30 meters.

5.4 Phone Calls

• Answer Call: The T1 supports automatic answering of incoming calls after a few rings.
• End Call: Press the multi-function button once.
• Reject Call: Press and hold the multi-function button for 2 seconds.
• Voice Dialing/Assistant: Double-press the multi-function button to activate your phone's voice assistant (e.g., Siri, Google Assistant).

5.5 Intercom Function

• Start Intercom: After pairing, a short press of the intercom button will initiate communication.
• End Intercom: A short press of the intercom button will end the communication.

5.6 EQ Sound Effects

Cycle through the available EQ modes (POP, VOCAL, ROCK) by pressing the dedicated EQ button (if available) or a specific button combination. Refer to the device's physical buttons for exact controls.

5.7 FM Radio

To activate the FM radio, press the FM button (if available) or a specific button combination. Use the volume buttons to change stations or scan.

6. Maintenance

• Cleaning: Wipe the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Water Exposure: While IP67 waterproof, avoid prolonged submersion. Ensure charging port cover is securely closed when not charging.
• Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge regularly, especially if storing for extended periods.
• Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

8. Specifications

9. User Tips

No specific user tips were available from reviews or Q&A. However, general tips for motorcycle intercoms include:

• Ensure your helmet speakers are positioned directly over your ears for the best audio experience and noise reduction.
• Keep the microphone close to your mouth but slightly off-center to minimize wind noise.
• Regularly check the battery level before long rides to avoid unexpected power loss.
• For optimal intercom range, try to maintain a clear line of sight with your riding partner.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policy or contact the point of purchase. Keep your proof of purchase for any warranty claims.

For further assistance, please contact TNICER customer support through their official channels.