Irontar Vanity Desk with Stool and Lighted Mirror User Manual

1. Introduction

Thank you for choosing the Irontar Vanity Desk with Stool and Lighted Mirror. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity desk. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Information

• Always follow the assembly instructions provided in the package.
• Ensure all parts are securely fastened before use.
• Anti-Tipping Device: For your safety, the vanity desk must be fixed to the wall using the included anti-tipping device to prevent it from falling over. This is especially important in households with children or pets.
• Do not overload drawers or the tabletop.
• Keep electrical components (LED lights) away from water.

3. Package Contents

Please check the package to ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Vanity Table with Lighted Mirror
• 1 x Cushioned Stool
• 1 x Instructions Manual (detailed assembly guide)
• 1 x Tools Bag (for assembly)
• Anti-tipping device and hardware

4. Assembly Instructions

Assembly is required for this vanity desk. Please follow the step-by-step instructions provided in the dedicated instruction manual included in your package. Below are general guidelines:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Refer to the parts list in your instruction manual to identify each piece and ensure nothing is missing.
2. Assemble the Vanity Table Base: Follow the diagrams to connect the side panels, back panel, and drawer supports.
3. Install Drawers: Assemble the drawer boxes and install the metal sliding rails. Insert the drawers into their respective compartments.
4. Attach the Mirror: Securely attach the lighted mirror to the vanity tabletop as per the instructions. Ensure all electrical connections for the LED lights are properly made.
5. Assemble the Stool: Put together the cushioned stool.
6. Secure with Anti-Tipping Device: Once the vanity desk is in its final position, use the provided anti-tipping device to secure it to the wall. This is a critical safety step.

5. Operating Instructions

5.1. LED Mirror Lighting

The vanity mirror features 11 LED lights with adjustable color modes and brightness.

• Power On/Off: Locate the touch switch on the mirror. Tap once to turn the lights on or off.
• Change Color Modes: With the lights on, tap the touch switch to cycle through the 3 available color modes: Cool White, Warm White, and Warm Yellow.
• Adjust Brightness: To adjust the brightness, press and hold the touch switch. The brightness will gradually increase or decrease. Release the switch when the desired brightness is reached.

5.2. Drawer Usage

The vanity desk is equipped with 7 large metal sliding drawers for ample storage.

• Opening/Closing: Gently pull or push the drawers using the handles. The metal rails ensure smooth operation.
• Organization: Utilize the various drawer sizes to organize your makeup, jewelry, and other essentials.

6. Care and Maintenance

• Cleaning the Surface: Wipe the EPA-grade particleboard surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Cleaning the Mirror: Use a standard glass cleaner and a lint-free cloth to clean the mirror surface.
• Drawer Rails: Periodically check the metal drawer rails for dust or debris and wipe them clean to ensure smooth operation.
• Stool Cushion: Spot clean the stool cushion with a mild fabric cleaner as needed.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the furniture finish.

7. Troubleshooting

7.1. LED Lights Not Working

• Check Power: Ensure the vanity desk is properly plugged into a working power outlet.
• Check Connections: Verify that all electrical connections for the LED lights are securely attached as per the assembly instructions.
• Touch Switch: Ensure you are correctly operating the touch switch (tap for on/off, tap to change color, press and hold for brightness).

7.2. Drawers Sticking or Not Sliding Smoothly

• Check for Obstructions: Remove all items from the drawer and check for any objects blocking the drawer slides.
• Clean Rails: Wipe the metal drawer rails clean of any dust or debris.
• Alignment: Ensure the drawer is properly aligned on its rails. If a drawer was removed, reinsert it carefully.
• Assembly: Verify that the drawer slides and the drawer box itself were assembled correctly and all screws are tightened.

7.3. Vanity Desk is Unstable

• Check Assembly: Re-check all screws and fasteners to ensure they are tight.
• Level Surface: Ensure the vanity desk is placed on a flat, level surface.
• Anti-Tipping Device: Confirm that the anti-tipping device is correctly installed and securely fastened to both the desk and the wall.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact the seller directly. If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require replacement parts, please reach out to Irontar customer support for assistance.