1. Introduction
Thank you for choosing the PopBloom S54 Dimmable Marine Aquarium LED Light. This full-spectrum LED light is designed to provide optimal lighting conditions for saltwater coral reefs and marine fish tanks. Featuring 4 adjustable channels, remote control, and advanced simulation functions, the S54 ensures a healthy and vibrant aquatic environment.
2. Package Contents
Please check the contents of your package based on the kit you purchased:
Each kit typically includes:
- Light panel(s)
- Remote control(s)
- Mounting hardware (Universal arm(s) or Hanging kit(s))
- Power supply(s) & appropriate plug(s)
- User manual(s)
3. Setup
3.1 Physical Installation
The PopBloom S54 light can be installed using either a universal arm kit or a hanging kit, depending on your package. Ensure the light is securely mounted above your aquarium, providing optimal coverage.
- Arm Mount: Attach the universal arm(s) to the light panel(s) and then secure the arm(s) to the side of your aquarium. Adjust the height and angle for desired light spread.
- Hanging Kit: Attach the hanging wires to the light panel(s) and suspend the light from a sturdy overhead support. Adjust the cable length to achieve the desired height above the water surface.
3.2 Power Connection
Connect the power supply to the light panel. Ensure the power plug matches your regional electrical standards (EU/BR/US/UK/AU). Plug the power supply into a suitable electrical outlet.
4. Operating Instructions
4.1 Remote Control Functions
The PopBloom S54 is controlled via the included remote. The remote allows for easy adjustment of brightness, timing, and light cycles.
- Preset Brightness: Use the 'Noon', 'ECON', and 'Moon' buttons for quick brightness settings.
- Timer & 24hrs Cycle: Set a 24-hour cycle for automated lighting.
- 0-100% Adjustment: Use the '+' and '-' buttons to fine-tune the brightness of individual channels (Ch1-Ch4).
- Simulate Sunrise/Sunset & Moonlight: The light can simulate natural day-night cycles.
4.2 Setting Light Cycles
The remote control allows for programming custom light cycles, including daylight, moonlight, and periods of no light.
Setting Daylight:
- At your desired start time (e.g., 9:00), press the 'Sunlight' button or the 'Daylight' timer button (e.g., '10').
- The light will run for the set duration (e.g., 10 hours), transitioning through sunset, then to moon (default).
Setting Moonlight:
- At your desired moon start time (e.g., 18:00), press the 'Moon' button.
- Then, press the timer button for 'Moon' (e.g., '14'). The light will run for the set duration (e.g., 14 hours), transitioning through sunrise, then to noon (default ECON).
Setting No Light at Night:
- At your desired turn-off time (e.g., 19:00), press the 'OFF' button.
- Then, press the 'time of OFF' button (e.g., '12'). The light will remain off for the set duration (e.g., 12 hours), then light up at the programmed sunrise time (e.g., 07:00).
4.3 Full Spectrum 4 Channels
The S54 features four independent channels, each contributing to the full spectrum output for optimal coral growth and coloration.
| Channels | LEDs | Watts | Functions |
|---|---|---|---|
| Channel 1 | White | 11 W | 12000K White |
| Channel 2 | Purple | 8 W | Moonlight |
| Channel 3 | Blue | 32 W | REEF GROW Blue |
| Channel 4 | Red/Green/Yellow | 12 W | Vivid color |
The PopBloom S54 also supports App Operation, though specific instructions for app connectivity are not detailed in this manual. Please refer to the official PopBloom website or app store for app-related guidance.
5. Maintenance
5.1 Cleaning
Regularly clean the light panel and diffuser to ensure maximum light output and efficiency. Use a soft, damp cloth to wipe the exterior. Avoid using harsh chemicals or abrasive materials that could damage the light.
5.2 Cooling System
The PopBloom S54 features aluminum finned cooling for efficient heat dissipation. Ensure that the cooling fins are free from dust and debris to maintain optimal performance and prolong the lifespan of the LEDs. Do not obstruct the airflow around the light fixture.
6. Troubleshooting
- Light not turning on:
- Check if the power supply is securely connected to both the light and the electrical outlet.
- Ensure the power outlet is functional.
- Verify the remote control batteries are not depleted.
- Remote control not responding:
- Replace the remote control batteries.
- Ensure there are no obstructions between the remote and the light's receiver.
- Inconsistent light output:
- Check for any loose connections in the power supply or light panel.
- Ensure the cooling fins are clean and not obstructed.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | PopBloom |
| Model | Shannon 54 (S54) |
| Type | Fish (Aquarium LED Light) |
| Power (W) | 90 W |
| Light Size | 21.3 in. x 4.7 in. x 1.4 in. (approx. 54cm x 12cm x 3.6cm) |
| Peak PAR @ Water Surface | 500 µMol |
| Peak PAR @ 24" Depth | 140 µMol |
| Design for | SPS/LPS corals reef, marine fish |
| Control Way | Remote Control (App Operated feature also mentioned) |
| Function | Sunrise_set, 24Hrs Cycle Run, Moonlight |
| Features | Full Spectrum, Best Cover, Ultra Thin, 4 Channels Adjustable |
| Adapter | AC 100-265 V Worldwide Suitable |
| Plug | EU/BR/US/UK/AU (sent based on country) |
| Battery Included | No |
| High-concerned chemical | None |
| Fixture | LID |
8. User Tips
- Optimal Placement: Consider the dimensions of your aquarium and the PAR distribution charts (Figure 12) to position the light for the best coverage and intensity for your corals and fish.
- Customizing Cycles: Experiment with the sunrise, sunset, and moonlight settings to mimic natural conditions, which can reduce stress for aquatic inhabitants and promote healthy growth.
- Channel Adjustment: Utilize the 4 independent channels to fine-tune the spectrum and intensity according to the specific needs of your coral species (SPS/LPS) and marine fish.
- Regular Cleaning: A clean light panel ensures maximum light penetration and efficiency. Make cleaning a routine part of your aquarium maintenance.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact PopBloom customer service through their official website or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.
