1. Introduction
This manual provides comprehensive instructions for the safe and effective use, installation, and maintenance of your new 3-piece meat grinder knives. These blades are designed as replacement parts for a wide range of meat grinder models, ensuring efficient and consistent grinding performance. Please read this manual thoroughly before attempting any installation or operation.
2. Safety Information
- Always handle the meat grinder blades with extreme care as they are very sharp.
- Keep blades out of reach of children.
- Ensure the meat grinder is unplugged before installing, removing, or cleaning the blades.
- Do not attempt to sharpen the blades yourself unless you have appropriate tools and expertise. Improper sharpening can damage the blade and affect performance.
3. Package Contents
- 3 x Meat Grinder Knives (Model: MDP-07C)
Image 1: Three stainless steel meat grinder blades.
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | MDP-07C |
| Material | SUS420 Stainless Steel |
| Diameter | 46mm |
| Hexagon Hole Size | 8.2mm |
| Thickness | 4.5mm |
| Origin | Mainland China |
| Application | Kitchen Appliance Parts, DIY Electrical Supplies |
Image 2: Technical diagram showing blade dimensions.
Image 3: Meat grinder blade on a measurement grid.
5. Compatibility
These meat grinder knives are compatible with the following models. Please verify your meat grinder's model number before installation.
Image 4: How to verify your meat grinder model number.
Moulinex
- HV2: ME203, ME204, ME205, ME206, ME207, ME208, ME209, ME211
- HV3: A14, A15 (After 01.01.2000), DRA, DRB
- HV4: ME400, ME401, ME403, ME405, ME406, ME410, ME411, ME413, ME415, ME416, ME420, ME421, ME428, ME430, ME440, ME442, ME452, ME454, ME456, ME458
- HV6: ADR7, ADR8, ME510, ME511, ME512, ME515, ME51A
- HV8: DKA1, DKA2, ME605, ME606, ME611, ME612, ME620, ME621, ME622, ME623, ME626, ME628, ME650, ME651, ME656, ME657, ME658, ME659, ME682, ME683, ME684, ME685, FP5, FP6, FP7, QA20, QA21
Tefal
- ME700, ME701, ME702, ME710, ME711
Polaris
- PMG1828, PMG1829, PMG1835, PMG1840, PMG1845, PMG1848, PMG1850, PMG1861, PMG2029, PMG2039
Scarlett
- SC-MG45M12, SC-MG45S52, SC-MG45S60, SC-MG45M13, SC-MG45S55, SC-MG45S61, SC-MG45M14, SC-MG45S56, SC-MG45S70, SC-MG45M16, SC-MG45S57, SL-MG46M60, SC-MG45S48, SC-MG45S64
Vitek
- VT-3610(W), VT-3611(W), VT-3612(BN), VT-3613, VT-3620(ST), VT-3622(BN), VT-3626, VT-3628(BK), VT-3630, VT-3631, VT-3633, VT-3635
Other Compatible Brands & Models
- STARWIND SMG2481
- MAGNIT RMF2747
- DAEWOO International DI1925S
- SUPRA 1830T
- HILTON MGTSP-7117
- BINATONE MGR 3030
- BORK MG RNP-1010
- LADOMIR M49, M52
6. Setup and Installation
Follow these steps to correctly install the meat grinder knife:
- Verify Compatibility: Before installation, ensure your meat grinder model is listed in the compatibility section. You can usually find the model number on the body or a label of your meat grinder.
- Disassemble Grinder Head: Ensure the meat grinder is unplugged. Carefully disassemble the grinder head by unscrewing the locking ring and removing the grinding plate and the old blade.
- Install New Blade: Place the new meat grinder knife onto the square shaft of the auger (worm gear). Ensure the blade sits flush against the auger's end and that the sharp cutting edges of the blade face outwards, towards where the grinding plate will be positioned.
- Reassemble: Place the grinding plate over the blade, aligning its notches with the corresponding slots in the grinder head. Secure all components by screwing the locking ring back into place firmly.
Video 1: Demonstration of meat grinder assembly, including blade installation.
Image 5: Correct blade installation in a meat grinder.
7. Operation
Once the meat grinder knife is correctly installed and all components are securely fastened, operate your meat grinder according to its original manufacturer's instructions. The new blades will ensure efficient processing of meat and other ingredients.
8. Maintenance and Cleaning
Proper maintenance ensures the longevity and performance of your meat grinder blades:
- After Each Use: Immediately after use, disassemble the grinder head and remove the blade. Wash the blade thoroughly with warm, soapy water to remove all food residues.
- Thorough Drying: Despite being made of SUS420 stainless steel, it is crucial to dry the blades completely after washing to prevent water spots or potential corrosion over time. Use a clean cloth or paper towel.
- Storage: Store the blades in a dry, safe place where they cannot cause injury or become dull. Consider storing them in their original packaging or a dedicated utensil drawer.
9. Troubleshooting
- Poor Grinding Performance: If the meat grinder is not grinding effectively, ensure the blade is installed with the sharp edges facing outwards. Also, check if the meat is cut into appropriate sizes and free of bones or excessive gristle. If the blade appears dull, it may need replacement.
- Blade Not Fitting: If the new blade does not fit your meat grinder, double-check your appliance's model number against the compatibility list provided in Section 5. You may also compare the dimensions of the new blade with your original blade and the specifications in Section 4.
10. User Tips
- For optimal grinding results, slightly chill your meat in the freezer for about 15-30 minutes before processing. This helps the blades cut more cleanly and reduces smearing.
- When cleaning, use a small brush to safely remove any stubborn food particles from the blade's edges and crevices, minimizing direct contact with your fingers.
11. Warranty and Support
As these are replacement parts, they are not covered by the original appliance manufacturer's warranty. For any questions, concerns, or support regarding these meat grinder knives, please contact the seller directly through the platform where the purchase was made. Provide your order details and a clear description of the issue for prompt assistance.
