1. Introduction
The Actto B705 is a versatile wireless mechanical keyboard designed for various computing environments, offering both Bluetooth and wired connectivity. Its retro typewriter-inspired design, combined with modern features like hot-swappable switches and RGB/LED backlighting, makes it suitable for both gaming and office use. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.
2. Safety Precautions
Before using this product, please familiarize yourself with the following safety guidelines:
- Avoid interference: If many Bluetooth devices are nearby, frequency confusion may occur. Try to minimize other Bluetooth devices in the vicinity.
- Do not disassemble: Do not attempt to disassemble or assemble the keyboard. This can void the warranty and cause damage.
- Cleaning: It is recommended to turn off the keyboard, remove keycaps, and clean them.
- Environmental conditions: The keyboard is not waterproof or dustproof. Avoid contact with moisture, dust, or contaminants.
- Operating range: The keyboard can be used within a distance of approximately 10 meters from the connected device.
- Potential jamming: When using a tablet or phone with Wi-Fi on the same frequency band as Bluetooth, signal jamming may occur.
- Bluetooth drivers: If connecting to a PC via a USB Bluetooth converter, ensure you have the latest Bluetooth drivers installed.
- Battery care: Always turn off the keyboard when not in use to conserve battery. Avoid storing the keyboard in hot or humid places, as extreme temperatures can shorten battery life or cause malfunction.
- Charging: Use only the authorized charging cable provided with the product. Do not charge for more than 24 hours. Charging time may vary based on the charging environment.
- Packaging: Be careful when opening the package to avoid injury from sharp edges.
Product specifications are subject to change without prior notice.
3. Package Contents
The Actto B705 keyboard package includes the following items:
- Actto B705 Mechanical Keyboard
- USB-C Charging Cable (1.5m)
- Keycap Puller
- Extra Highlight Color Keycaps (2 pieces)
- User's Guide

4. Setup and Connection
4.1. Initial Charging
Before first use, it is recommended to fully charge the keyboard. Connect the supplied USB-C cable to the charging port on the keyboard and the other end to a 5V/1A power source. The battery indicator LED will show charging status.

4.2. Power On/Off
- To Turn On: Slide the power button (located near the charging port) to the right.
- To Turn Off: Slide the power button to the left.

4.3. Wired Mode Connection
For devices that do not support Bluetooth or when a stable wired connection is preferred:
- Turn the mode switch knob (on the left side of the keyboard) to select the wired mode (indicated by a red LED).
- Connect the keyboard and your device using the supplied USB-C cable.
- The keyboard can be used directly once connected. Ensure the LED stops flashing after connection.

4.4. Bluetooth Mode Connection (Up to 3 Devices)
The Actto B705 supports connecting to up to three Bluetooth devices simultaneously.

General Bluetooth Pairing Steps:
- Turn the mode switch knob to select one of the Bluetooth channels (CH1, CH2, or CH3). The corresponding blue LED will light up and flash, indicating it's ready for pairing.
- On your device (Mac, PC, Android, iOS), enable Bluetooth and search for available devices.
- Select "ActtoB model" (B703 or B705) from the list of devices.
- Once paired, the blue LED for that channel will stop flashing and remain steadily lit.
Specific Bluetooth Connection Methods:
For Mac PC:
- Click System Preferences > Bluetooth.
- Click "Turn on Bluetooth".
- Turn the mode switch knob on the keyboard to select the desired Bluetooth channel (CH1 to CH3). The blue LED will flash.
- On your Mac, select "ActtoB model" (B703 or B705) from the Bluetooth device list to connect.
For Windows 10/11:
Ensure your computer has a built-in or installed Bluetooth receiver. If not, purchase and install one before proceeding.
- Once the Bluetooth receiver is connected to your computer, the Bluetooth icon will appear in the window toolbar.
- Hover over the Bluetooth icon and right-click.
- Click "Add Bluetooth Devices".
- Select "Bluetooth" as the type of device to add.
- Turn the mode switch knob on the keyboard to select the desired Bluetooth channel (CH1 to CH3). The blue LED will flash.
- On your PC, select "ActtoB model" (B703 or B705) from the Bluetooth device list to connect.

4.5. How to Initialize Bluetooth Pairing (Re-pairing)
To delete all previously paired device information from the keyboard and re-pair:
- Press and hold the Fn + Esc keys simultaneously for approximately 3 seconds. This will clear all registered device information from CH1, CH2, and CH3.
- You can then proceed with the general Bluetooth pairing steps for new devices.
5. Operating Instructions
5.1. Function Keys (Fn Combinations)
The keyboard features a range of multimedia and system function keys accessible by pressing the Fn key in combination with other keys. Note that some functions may vary or not be supported depending on your operating system (Windows, Android, iOS, Mac).
- Fn + F1: Decrease screen brightness
- Fn + F2: Increase screen brightness
- Fn + F3: Multitasking (Windows/Android)
- Fn + F4: Email (Android) / File Explorer (Windows) / Program List (Mac)
- Fn + F5: Decrease backlight brightness
- Fn + F6: Increase backlight brightness
- Fn + F7: Previous song
- Fn + F8: Play/Pause
- Fn + F9: Next song
- Fn + F10: Mute
- Fn + F11: Volume Down
- Fn + F12: Volume Up
- Fn + PrtSc/PgUp: Reduce backlight speed
- Fn + Insert/PgDn: Increase backlight speed
- Fn + Del: Change backlight mode (20 modes)
- Fn + Back: Turn off backlight
- Fn + Win: Lock Windows key


5.2. Volume Adjustment
The keyboard features a dedicated volume control knob on the right side. Simply turn the knob to adjust the volume up or down.

5.3. System Switching
To ensure proper key functionality across different operating systems, use the following combinations:
- Android: Press Fn + Q
- Windows: Press Fn + W
- iOS (iPad, iPhone): Press Fn + E
After switching, some keys may require a moment to adapt or may not work properly depending on the device and system. If issues persist, ensure your device's settings are configured correctly for an external keyboard.
5.4. Backlight Settings
The keyboard offers 20 different backlight modes. Use the Fn + Del combination to cycle through these modes. You can also adjust backlight brightness and speed using Fn + F5/F6 and Fn + PrtSc/Insert respectively. To turn off the backlight, press Fn + Back.
Note: Backlight functions are not supported on iOS devices, and the backlight LEDs will not illuminate.
5.5. Status Indicators
The keyboard has several indicator lights:
- Battery Indicator: Shows battery level (Green LED: above 70%, Blue LED: 30-70%, Red LED: below 10%). A flashing green LED indicates charging.
- Caps Lock Indicator: A blue LED illuminates when Caps Lock is active.
- Digital Lock Indicator: A blue LED illuminates when the digital lock key is pressed.
Note for iOS: If the Caps Lock key in your device's settings menu has "Korean/English Conversion" enabled, you must disable this feature to ensure the Caps Lock key functions correctly on the keyboard.
5.6. Korean/English Conversion Method
To switch between Korean and English input methods:
- Windows/Android: Press Ctrl + Alt
- Mac PC: Press Command + Space
- iOS (iPad, iPhone): Press Ctrl + Space
Functionality may vary depending on the specific device and system.

5.7. Power Saving Mode
The keyboard features a battery sleep function to reduce power consumption. If there is no typing activity for approximately 10 minutes, the keyboard will automatically enter sleep mode. Press any key to wake it up and resume operation.
6. Maintenance
- Cleaning: Turn off the keyboard before cleaning. Use the provided keycap puller to carefully remove keycaps. Wipe the keycaps and keyboard surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the keyboard in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the keyboard regularly, even if not in constant use.
- Switch Replacement: The keyboard features hot-swappable switches. If a switch needs replacement, carefully pull out the old switch and insert a new compatible switch. Ensure the keyboard is powered off during this process.
7. Troubleshooting
- Keyboard not connecting via Bluetooth:
a. Ensure the keyboard is powered on and the correct Bluetooth channel (CH1, CH2, or CH3) is selected.
b. Make sure Bluetooth is enabled on your device.
c. Try initializing Bluetooth pairing by holding Fn + Esc for 3 seconds, then re-pair.
d. Check if your device's Bluetooth drivers are up to date (especially for Windows PCs).
e. Move closer to the device (within 10 meters) and ensure no other strong wireless signals are causing interference. - Keys not responding or working incorrectly:
a. Ensure the keyboard is connected properly (wired or Bluetooth).
b. Check if the correct operating system mode is selected (Fn + Q for Android, Fn + W for Windows, Fn + E for iOS).
c. If using iOS, ensure "Korean/English Conversion" is disabled in your device's keyboard settings if Caps Lock is not working. - Backlight not working (iOS):
Backlight functions are not supported on iOS devices. This is normal operation. - Short battery life:
a. Ensure the keyboard is fully charged.
b. Turn off the keyboard when not in use.
c. Reduce backlight brightness or turn it off completely to conserve power. - Lag or input delay:
a. Ensure the keyboard is within the optimal operating range (within 10 meters).
b. Avoid using Wi-Fi and Bluetooth on the same frequency band on your device simultaneously, as this can cause interference.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name and Model | B705 |
| Manufacturer | Actto |
| Manufacturing Country | China |
| Dimensions | 397 x 153 x 48 mm |
| Weight | 1045g |
| Color Options | Cream White, Ivory White, Navy Blue, Black |
| Connectivity Modes | 3 Bluetooth channels, Wired (USB-C) |
| Cable Length | 1.5m |
| Bluetooth Version | Bluetooth 5.1 |
| Key Life | 50 million times |
| Number of Keys | 102 keys |
| Key Switch Type | Mechanical (Outemu/Gateron, hot-swappable) |
| Operating Voltage/Current | 5V / 150mA |
| Power Consumption (Default Backlight) | 150mA |
| Power Consumption (Standby) | 10mA |
| Power Consumption (Sleep Mode) | 8mA |
| Battery Capacity | 1500mAh / 3.7V |
| Battery Life (Backlight Fully Bright) | 10 hours of continuous work |
| Battery Charging Voltage | 5V/1A |
| Compatible Operating Systems | Android 7.0+, iOS 10.4+, Windows 8/10/11, Mac 10.9+ |
9. User Tips
- Quick Device Switching: Utilize the mode switch knob to quickly toggle between your three paired Bluetooth devices or wired mode for seamless workflow.
- Maximize Battery Life: If you don't require backlighting, turn it off using Fn + Back to significantly extend the keyboard's operating time.
- Customization: Experiment with the provided extra keycaps to personalize the look of your keyboard.
- Stable Placement: The keyboard features 3 height-adjustable stands with rubber pads. Adjust them to your preferred typing angle for comfort and stability.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.
11. Product Video
Video: A short demonstration showcasing the Actto B705 keyboard's design, multi-device connectivity, backlight features, and mechanical switches.