1. Introduction
Thank you for choosing the HITBOX HBT2000Pro 4-in-1 TIG Welding Machine. This versatile inverter welder is designed for a wide range of welding tasks, offering Cold TIG, Pulse TIG, TIG, and MMA (ARC/Stick) welding functions. Equipped with advanced IGBT technology and a precision digital control panel, it provides stable performance and clean welds for various materials. Please read this manual thoroughly before operation to ensure safe and efficient use of your welding machine.
Figure 1: HITBOX HBT2000Pro 4-in-1 TIG Welding Machine
2. Safety Information
WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.
- Always wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing.
- Ensure adequate ventilation in the work area to avoid inhaling fumes.
- Protect bystanders from arc rays and hot metal.
- Ensure the machine is properly grounded.
- Do not operate the machine in damp or wet conditions.
- Disconnect power before performing any maintenance or adjustments.
- Keep children and unauthorized personnel away from the welding area.
3. Product Features
The HBT2000Pro is engineered with several advanced features to enhance your welding experience:
- 4-in-1 Functionality: Supports Cold TIG, Pulse TIG, TIG, and MMA (ARC/Stick) welding processes.
- Precision Digital Panel: Allows for easy and precise multi-parameter settings.
- IGBT Inverter Technology: Ensures stable arc, high efficiency, and energy saving.
- HF Arc Ignition: Provides reliable and non-contact arc starting for TIG welding.
- Pulse Function: Ideal for welding ultra-thin plates (down to 0.5mm) without deformation.
- 2T/4T Function: Offers flexibility for short and long welding operations.
- Automatic Standby: Reduces power consumption by entering standby mode after three minutes of no-load time.
- Output Quick Plug 35-50: Designed to prevent overheating of the welding gun or handle due to excessive current.
- Smooth Arc, Hot Start, Anti Stick, Arc Force: Features for enhanced MMA welding performance.
Figure 2: Key features of the HBT2000Pro
Figure 3: Low Temperature TIG Welding capabilities
4. Setup Instructions
Before operating the welding machine, ensure all connections are secure and correct.
-
4.1 Power Connection
Connect the welding machine to a 220V power supply. Ensure the power outlet is properly grounded and can handle the machine's power requirements.
-
4.2 Welding Torch Connection (TIG/Pulse TIG/Cold TIG)
Connect the TIG torch to the appropriate quick plug on the front panel. Ensure the gas hose from the torch is connected to the gas inlet on the machine.
-
4.3 Earth Clamp Connection
Connect the earth clamp cable to the negative (-) terminal on the front panel. Securely attach the earth clamp to the workpiece or welding table, ensuring good electrical contact.
-
4.4 Electrode Holder Connection (MMA/ARC)
For MMA welding, connect the electrode holder cable to the positive (+) terminal on the front panel.
-
4.5 Gas Cylinder Connection
Connect the gas tube from your inert gas cylinder (e.g., Argon) to the gas inlet on the rear of the welding machine. Ensure all gas connections are tight to prevent leaks.
-
4.6 Optional: Welding Helmet Connection
If using the HITBOX HV009 Cold Welding Helmet, connect its cable to the designated port on the welding machine for synchronized darkening functionality.
Figure 4: Welding Helmet Connection Diagram
Figure 5: Welder and included accessories for setup
Video 1: HBT2000Pro Product Overview and Panel Demonstration
5. Operating Instructions
5.1 Control Panel Overview
The HBT2000Pro features a user-friendly digital control panel for selecting welding modes and adjusting parameters. The green lights indicate which function parameter can be adjusted.
Figure 6: Digital Control Panel
5.2 Mode Selection
Use the mode selection button (play icon) to cycle through the available welding modes:
- Cold TIG: For precise, low-heat welding, reducing distortion and discoloration.
- TIGP (Pulse TIG): For welding thin materials and controlling heat input.
- TIG: Standard DC TIG welding.
- MMA (ARC/Stick): For shielded metal arc welding.
Figure 7: Multi-functional Parameter Display
5.3 Parameter Adjustment
Use the 'ADJUSTMENT' knob to change the values of the selected parameter. The digital display will show the current setting.
- Welding Current (Ip, Ib): Adjust the main welding current.
- Pre-Gas (Tpre): Time for gas flow before arc ignition.
- Post-Gas (Tpost): Time for gas flow after arc extinction.
- Up Slope (Tup): Time for current to rise from start current to peak current.
- Down Slope (Tdown): Time for current to fall from peak current to end current.
- Pulse Frequency (Hz): For Pulse TIG and Cold TIG (0.2-200 Hz).
- Welding Times (T-welding, Cold TIG): 1-900ms for Cold TIG.
- Take Times (T-takt, Cold TIG): 0.1-10 seconds for Cold TIG.
5.4 2T/4T Function
The HBT2000Pro offers 2T (Two-Touch) and 4T (Four-Touch) trigger modes:
- 2T Mode: Press and hold the torch trigger to start welding; release to stop. Suitable for short welds.
- 4T Mode: Press and release the trigger to start welding; press and release again to stop. Ideal for long welds, reducing hand fatigue.
5.5 ARC (MMA) Specific Functions
- Quick Spot Welding: Allows for rapid spot welds.
- Set Spot Welding Time: Adjust the duration of spot welds.
- Hot Arc Ignition: Ensures quick and reliable arc starting for stick electrodes.
- Anti Stick: Prevents the electrode from sticking to the workpiece.
- Arc Force: Provides additional current during short arc conditions to prevent sticking.
Figure 8: MMA Welding Features
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is powered off and unplugged.
- Cable Inspection: Regularly inspect all welding cables, torch, and earth clamp for damage, cuts, or loose connections. Replace any damaged components immediately.
- Gas System: Check gas hoses and connections for leaks. Ensure the gas regulator is functioning correctly.
- Electrode/Tungsten: Ensure tungsten electrodes are properly ground and free from contamination. Replace worn-out electrodes.
- Storage: Store the welding machine in a clean, dry environment when not in use.
7. Troubleshooting & FAQ
This section addresses common questions and issues you might encounter.
- Q: Can this machine weld stainless steel or Aluminum?
- A: Stainless steel can be welded perfectly with the HBT2000Pro. However, it cannot weld aluminum. For TIG aluminum welding, you would need an AC/DC TIG machine like the "HBT250P AC/DC" model.
- Q: Does the machine offer 2T/4T cycles?
- A: Yes, the HBT2000Pro DC TIG offers both 2T and 4T functions for flexible operation.
- Q: Does this unit have pre and post gas flow?
- A: Yes, the machine includes adjustable pre-gas pulses, starting current, starting slope, peak current, final slope time, final current, and post-gas settings.
- Q: What are the advantages of the Cold TIG welding function?
- A: The Cold TIG function allows for precise welding of materials as thin as 0.3mm, significantly reducing deformation and discoloration of workpieces. It produces fine weld seams and beautiful surfaces with an adjustable frequency of 0-200Hz.
- Q: What welding functions does the welding machine have?
- A: The HBT2000P is a 4-in-1 Cold TIG welding machine that can perform Cold TIG, Pulse TIG, DC TIG, and MMA welding processes.
Figure 9: Common Questions and Answers
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | HITBOX |
| Model Number | HBT2000Pro |
| Technology | IGBT Inverter Welding |
| Input Voltage | 220V |
| No-load Voltage | DC62V |
| Arc Force Current Range | 10-200A |
| Arc Ignition Current Range | 20-200A |
| Duty Cycle | 90% |
| No-load Loss | 40W |
| Arcing Way | HF (High Frequency) |
| Efficiency | 80% |
| Base Material (Weldable) | Carbon Stainless, Low-alloy Steel |
| Welding Process | DC TIG / ARC (MMA) / Pulse TIG / Cold TIG |
| Welding Times (Cold TIG) | 1-900ms |
| Take Times (Cold TIG) | 0.1-10 seconds |
| Pulse Frequency (Hz) | 0.2-200 Hz |
| Plug Type | EU Plug |
| Certification | CE |
| Is Smart Device | No |
| Origin | Mainland China |
| Package Weight | 8.622 kg |
| Package Dimensions (L x W x H) | 45 x 37 x 17 cm |
8.1 Optional HV009 Cold Welding Helmet Specifications
Figure 10: HV009 Cold Welding Helmet Features
- Features: True Color, Synchronised Darkening, PP-Strong Material, Anti-Strong Arc Light.
- Panel Display: LED Light for brighter operating view, Cap Shell (Ultralight, drop resistant fabric), Protective Lens (Anti-against dust, metal particles), LCD Surface (100% darkening in sync with the pulse).
- Lens Visual Range: 3.67" x 1.75" (93.2mm x 44.45mm).
- Welding Mode Selection: Cold TIG / TIG.
- Lighting Level: Low / High.
Figure 11: HV009 Welding Helmet Lens Specifications
9. User Tips
- For welding ultra-thin plates (0.5mm), utilize the Pulse TIG function to prevent material deformation.
- The output quick plug (35-50) is designed to manage current effectively and prevent the welding gun or handle from overheating. Ensure it's properly connected.
- Take advantage of the automatic standby state, which activates after three minutes of no-load time, to reduce power consumption.
- When welding stainless steel, the HBT2000Pro performs excellently. For aluminum, consider a dedicated AC/DC TIG welder.
- Familiarize yourself with the pre and post gas flow settings to optimize your weld quality and protect the weld puddle.
10. Warranty and Support
The HITBOX HBT2000Pro comes with a 2-year guarantee. For warranty claims or technical support, please contact the HITBOX Official Store or your authorized dealer. Ensure you retain your proof of purchase for warranty validation.
For further assistance, please refer to the contact information provided by your seller or visit the official HITBOX website.