Introduction
Thank you for choosing the RORRY 10000mAh PD20W Portable Power Bank. This all-in-one portable charger is designed for convenience and versatility, offering fast charging for a wide range of devices including Apple Watch, iPhone, AirPods, and Android devices. Its compact design with built-in cables and magnetic wireless charging makes it an ideal companion for your daily charging needs.
RORRY 10000mAh All-in-One Portable Charger with PD 20W, showing wireless charging for Apple Watch and wired charging for iPhone.
Safety Information
To ensure safe and optimal use of your RORRY Portable Power Bank, please observe the following:
- Do not expose the power bank to extreme temperatures, direct sunlight, or moisture.
- Avoid dropping, disassembling, or attempting to repair the device yourself.
- Keep out of reach of children.
- The power bank has built-in over-temperature, over-current, over-voltage, and short-circuit protection to ensure safe operation.
- Use only compatible charging cables and adapters.
Setup and Initial Charging
Before first use, it is recommended to fully charge your RORRY power bank.
- Connect a USB-C cable to the power bank's USB-C input/output port.
- Connect the other end of the USB-C cable to a compatible wall adapter (18W recommended for fastest charging).
- The LED indicators on the power bank will illuminate to show the charging progress. A full recharge takes approximately 3.5 hours with an 18W input.
The RORRY power bank being recharged via a wall adapter.
USB-C port for input and output.
Operating Instructions
The RORRY power bank is designed to charge multiple devices simultaneously, offering both wired and wireless charging options.
Charging Apple Watch
Place your Apple Watch directly onto the magnetic wireless charging pad located on the power bank. The power bank provides 3.5W fast charging, capable of fully charging an Apple Watch Series 9 in approximately 1.4 hours.
Apple Watch wirelessly charging on the power bank.
Charging iPhone, AirPods, and Android Devices
Utilize the built-in Lightning or USB-C cables to connect your iPhone, AirPods, or compatible Android device. The power bank supports PD 20W fast charging for iPhones, capable of fully charging an iPhone 15 Pro in about 1.5 hours. The iOS cable output is 5V/2.4A, and the Type-C cable output is 20W.
iPhone charging via built-in cable.
Simultaneous Charging
The RORRY power bank allows for simultaneous charging of multiple devices. For example, you can wirelessly charge your Apple Watch while also charging your iPhone or AirPods via the built-in cables.
Simultaneous charging of an iPhone and Apple Watch.
Universal compatibility with various devices.
Video Demonstration
Video demonstrating the RORRY portable power bank's multi-device charging capabilities and compact design, showing it charging an iPhone, Apple Watch, and AirPods, and being attached to a bag.
Maintenance
- Clean the power bank with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Store the power bank in a cool, dry place when not in use.
- Avoid exposing the device to water or other liquids.
- Periodically recharge the power bank if it's stored for extended periods to maintain battery health.
Troubleshooting
Device not charging
- Ensure the power bank itself is sufficiently charged. Check the LED indicators.
- Verify that the charging cable is securely connected to both the power bank and your device.
- For wireless charging, ensure your Apple Watch is correctly positioned on the magnetic charging pad.
- Try using a different charging cable or port on the power bank.
Slow charging
- Confirm that your device supports fast charging and that the cable used is compatible with fast charging protocols.
- Ensure the power bank is fully charged for optimal performance.
Power bank not charging
- Check the USB-C charging cable and wall adapter. Ensure they are functioning correctly and connected securely to the power bank's USB-C input.
- Try a different wall adapter or USB-C cable.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | RORRY |
| Model | D2-10000 |
| Battery Type | Li-Polymer Battery |
| Battery Capacity | 10000mAh |
| Max Output | 20W |
| Input Interface | USB Type C (18W) |
| Output Interface | LIGHTNING, USB-Type C, Wireless Charger |
| Wireless Charging Output (Apple Watch) | 3.5W |
| Built-in iOS Cable Output | 5V/2.4A |
| Built-in Type-C Cable Output | 20W |
| Support Quick Charge Technology | One-way Quick Charge |
| Shell Material | Plastic |
| Dimensions (L x W x H) | 4.33" x 2.83" x 0.83" (approx. 11cm x 7.2cm x 2.1cm) |
| Weight | 207g / 7.3oz |
| Certification | pse, RoHS, CE, FCC |
| Origin | Mainland China |
10000mAh capacity and estimated charging times.
Compact and lightweight design with dimensions and weight.
User Tips
- For optimal charging speed, ensure your devices and cables are compatible with the power bank's fast charging capabilities (PD 20W for iPhone, 3.5W for Apple Watch).
- The compact keychain design makes it easy to attach to bags or keys, ensuring you always have a charger on hand for travel.
- Regularly check the LED indicators to monitor the power bank's battery level and recharge it before it's completely depleted to prolong battery life.
- When charging multiple devices, prioritize the device that needs power most, as total output is shared.
Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact the manufacturer directly. Refer to the product packaging or the official RORRY website for contact information. Please retain your proof of purchase for warranty claims.
