NANKADF TPS Series DC Power Supply

Contents

NANKADF Programmable DC Power Supply User Manual

Models: TPS305, TPS3010, TPS605, TPS1203

1. Introduction and Overview

The NANKADF Programmable DC Power Supply is a versatile and high-precision laboratory power supply designed for a wide range of applications. Utilizing micro-switching technology, it offers a compact size, light weight, and high power density, making it an ideal tool for electronics enthusiasts and professionals alike.

This power supply is capable of operating continuously at full load and is widely used in electronic product repair, laboratory research and development, educational settings, and production line aging tests. Its features include automatic constant voltage and constant current switching, a clear 4-digit LED display, and convenient encoder controls.

NANKADF Programmable DC Power Supply with display showing 30.00V, 10.00A, 300.0W
Figure 1: NANKADF Programmable DC Power Supply (TPS3010 model shown)
Overview of NANKADF DC Power Supply features including high precision, encoder adjustment, output button, overcurrent protection, temperature controlled fan, and USB fast charging.
Figure 2: Key features of the NANKADF DC Power Supply

2. Safety Information

  • Always ensure the power supply is connected to a properly grounded outlet.
  • Verify the input voltage selector switch (115V/230V) on the rear panel matches your local mains voltage before connecting to power. Incorrect voltage selection can cause severe damage to the unit.
  • Do not operate the power supply in wet or damp conditions.
  • Avoid blocking the ventilation openings to prevent overheating. The internal fan requires clear airflow.
  • Do not attempt to open or service the unit yourself. Refer all servicing to qualified personnel.
  • Ensure output terminals are correctly connected to the load. Incorrect polarity can damage the load or the power supply.
  • In case of a short circuit or overcurrent, the OCP (Over-Current Protection) will activate. Disconnect the load and resolve the issue before resetting the OCP.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged:

  • 1x NANKADF DC Power Supply Unit
  • 1x Power Cord (appropriate for EU, US, UK, or Australia region)
  • 1x Test Lead Set
  • 1x User Manual (this document)
NANKADF DC Power Supply with included power cord, test leads, and user manual.
Figure 3: Product and accessories included in the package

4. Product Features

  • Micro-Switching Design: Compact size, light weight, and high power density.
  • Automatic CV/CC Switching: Seamless transition between Constant Voltage (CV) and Constant Current (CC) modes.
  • Integrated Fast Charging: Features USB-A and Type-C charging ports with a built-in fast charging identification chip, providing up to 18W output for mobile phones, tablets, and power banks.
  • Adjustable Output: Continuously adjustable output voltage and current from 0 to the rated maximum.
  • 4-Digit LED Display: High-precision display for voltage, current, and power readings.
  • Encoder Controls: High-precision encoder adjustment knob for fine-tuning voltage and current, with a one-touch switching key for V/A adjustment.
  • Output Control Button: Dedicated button to easily turn the output on or off.
  • Comprehensive Protection: Includes Over-Voltage Protection (OVP), Over-Current Protection (OCP), and Over-Temperature Protection.
  • Temperature-Controlled Fan: Automatic cooling fan activates when the internal temperature reaches a certain threshold, ensuring low noise and extended service life.
  • Dual Input Voltage: Supports AC 110V and 220V input, selectable via a switch on the rear panel.
NANKADF DC Power Supply with USB-A and Type-C quick charge interfaces, indicating 18W output.
Figure 4: USB-A/Type-C Quick Charge Interface

5. Specifications

The NANKADF TPS series offers various models with different output capabilities. Please refer to the table below for detailed specifications.

AttributeSpecification
Brand NameNANKADF
TypePower Supply
Rated Capacity40-1000VA
Output Frequency50/60Hz
Output TypeSINGLE
CertificationCE
OriginMainland China
Dimensions (L x W x H)210mm x 145mm x 80mm
Weight1.2kg
Input VoltageAC115/230V ± 10% (Switchable)
USB-A/Type-C OutputUp to 18W Fast Charging

Model-Specific Specifications:

Model NumberOutput VoltageOutput CurrentOutput Power
TPS3050-30V0-5A0-150W
TPS30100-30V0-10A0-300W
TPS6050-60V0-5A0-300W
TPS12030-120V0-3A0-360W
Mini Portable Bench Power Supply with dimensions 210mm x 145mm x 80mm and weight 1.2kg.
Figure 5: Compact dimensions and weight of the power supply
NANKADF TPS305H-DC Power Supply showing output voltage 0-30V, output current 0-5A, power display 0-150W, input voltage AC115/230V 50/60Hz.
Figure 6: Specifications for TPS305H model
NANKADF TPS3010H-DC Power Supply showing output voltage 0-30V, output current 0-10A, power display 0-300W, input voltage AC115/230V 50/60Hz.
Figure 7: Specifications for TPS3010H model
NANKADF TPS605H-DC Power Supply showing output voltage 0-60V, output current 0-5A, power display 0-300W, input voltage AC115/230V 50/60Hz.
Figure 8: Specifications for TPS605H model
NANKADF TPS1203H-DC Power Supply showing output voltage 0-120V, output current 0-3A, power display 0-360W, input voltage AC115/230V 50/60Hz.
Figure 9: Specifications for TPS1203H model

6. Setup Guide

  1. Unpacking: Carefully remove the power supply and all accessories from the packaging. Inspect for any signs of damage.
  2. Input Voltage Selection: Locate the AC input voltage selector switch on the rear panel of the unit. Ensure it is set to match your local mains voltage (115V or 230V). Incorrect selection can damage the unit.
  3. Power Connection: Connect the provided power cord to the AC input socket on the rear panel of the power supply, then plug the other end into a grounded wall outlet.
  4. Output Terminal Connection: Connect the test leads to the positive (red), negative (black), and ground (green) output terminals on the front panel. Ensure a secure connection.
  5. Load Connection: Connect the other end of the test leads to your device or circuit (load), observing correct polarity.
Rear view of the NANKADF DC Power Supply showing the temperature controlled fan, fuse box, and AC input voltage selector switch (115V/230V).
Figure 10: Rear panel with input voltage selector switch

7. Operating Instructions

7.1 Power On/Off

  • Press the power button (usually located near the encoder knob) to turn the unit on. The LED display will illuminate.
  • Press the power button again to turn the unit off.

7.2 Adjusting Voltage and Current

  • The power supply features a high-precision encoder adjustment knob.
  • Press the V/A button to switch between voltage and current adjustment modes. The active parameter will be highlighted on the display.
  • Rotate the encoder knob to adjust the selected parameter (voltage or current).
  • Press the encoder knob to change the adjustment position (e.g., from tens to units, or decimal places) for finer control.
Diagram showing how to use the high precision encoder adjustment knob: press to change adjustment position, rotate to adjust numbers 0-9. Also shows the V/A switching key.
Figure 11: High Precision Encoder Adjustment Knob

Video 1: Product demonstration showing voltage/current adjustment, OCP, and sound control.

7.3 Output Control

  • Press the OUT button to enable or disable the power output to the terminals. The "OUT" indicator on the display will show the current status.
Diagram showing the function of the OUT button to turn output on or off, and the OCP button for short circuit protection.
Figure 12: Output (OUT) and Over-Current Protection (OCP) buttons

7.4 Over-Current Protection (OCP)

  • The OCP function automatically interrupts the output and issues an alarm when a short circuit or overcurrent condition occurs.
  • To activate/deactivate OCP, press the OCP button. The OCP indicator on the display will show its status.
  • If OCP is triggered, resolve the short circuit or overcurrent issue, then press the OCP button to reset and resume operation.

7.5 USB-A/Type-C Fast Charging

  • The front panel includes USB-A and Type-C ports for fast charging compatible electronic devices.
  • Simply connect your device to the appropriate port. The power supply will automatically detect and provide up to 18W fast charging.
NANKADF DC Power Supply charging a smartphone and a power bank via its USB-A and Type-C ports, demonstrating the fast charge function.
Figure 13: Fast charge function in use

7.6 Mute Function

  • To turn off the sound (e.g., OCP alarm sound), long press the encoder adjustment knob. Long press again to re-enable the sound.

8. Maintenance

  • Cleaning: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Ventilation: Ensure the ventilation openings on the sides and rear of the unit are free from dust and obstructions. The temperature-controlled fan will automatically manage internal temperature, but clear airflow is crucial for its effectiveness and the longevity of the device.
  • Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Fuse Replacement: If the unit fails to power on, check the fuse located in the fuse box on the rear panel. Replace it with a fuse of the same type and rating if necessary.

9. Troubleshooting

ProblemPossible CauseSolution
Unit does not power on.No power from outlet, loose power cord, incorrect input voltage selection, blown fuse.Check wall outlet, ensure power cord is securely connected, verify 115V/230V switch setting, check and replace fuse if blown.
No output voltage/current.Output (OUT) button is off, OCP triggered, loose test leads, incorrect settings.Press the OUT button to enable output, check for short circuit and reset OCP, ensure test leads are securely connected, verify voltage/current settings.
OCP alarm sounds and output cuts off.Short circuit or overcurrent condition in the connected load.Immediately disconnect the load. Identify and resolve the short circuit or overcurrent issue in your circuit. Press the OCP button to reset.
No sound from the unit.Mute function is activated.Long press the encoder adjustment knob to re-enable sound.
Inaccurate voltage/current readings.Poor connection, faulty test leads, external interference.Ensure all connections are tight. Try different test leads. Operate away from strong electromagnetic fields.

10. User Tips

  • For precise adjustments, use the encoder knob's press function to select the digit you wish to change, then rotate for fine-tuning.
  • Always set the voltage and current limits before connecting your sensitive circuit to prevent accidental damage.
  • Utilize the OCP feature when working with new or untested circuits to protect both your project and the power supply from short circuits.
  • The integrated USB-A/Type-C ports are convenient for charging devices directly from your workbench, freeing up other power outlets.
  • Keep the user manual handy for quick reference, especially for understanding the display indicators and button functions.

11. Warranty and Support

NANKADF is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please contact the seller or NANKADF customer support through the platform where the product was purchased. Please retain your proof of purchase for warranty purposes.

This product is certified with CE, ensuring compliance with European safety, health, and environmental protection requirements.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.