1. Introduction
The T&G TG658 is a versatile portable Bluetooth speaker designed to deliver high-fidelity sound for various activities. With Bluetooth 5.3 connectivity, FM radio, and multiple playback options including AUX, TF card, and USB disk, it's perfect for outdoor adventures like camping, riding, and hiking, as well as for home use. Its waterproof design and TWS (True Wireless Stereo) functionality enhance your audio experience.
2. Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for prolonged periods.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep the speaker away from water and liquids, despite its waterproof rating, to prevent damage to internal components.
- Do not attempt to disassemble, repair, or modify the speaker yourself. Contact qualified service personnel if needed.
- Use only the specified charging voltage (5V/500mA) and avoid fast charging methods, as this can damage the battery and speaker.
- Keep out of reach of children.
3. Package Contents
Please check the package for the following items:
- T&G TG658 Portable Bluetooth Speaker
- USB Charging Cable (Type-C)
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | V5.3 |
| Wireless Transmission Range | 10 meters |
| Signal-to-Noise Ratio (SNR) | ≥85dB |
| Battery Capacity | 1200mAh |
| Built-in Voltage | 3.7V |
| Normal Volume Playback Time | Approximately 2 hours |
| Speaker Driver | Ø 52mm |
| Horn Power | 4Ω/8W |
| Frequency Response | 120Hz-18KHz |
| Unit Dimensions (L*W*H) | 90mm * 90.5mm * 113mm |
| Unit Weight | 389g |
| Charging Input | 5V/500mA (Type-C USB) |
| Input/Output | USB, AUX, TF Card |
| Sound Mode | Stereo Sound Mode |
| Waterproof | Yes |
| Built-in Microphone | Yes |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosures | 2 |
| Features | Phone Function, TWS Wireless, LED lights |
5. Setup
5.1 Charging the Speaker
Before first use, fully charge the speaker. Connect the provided Type-C USB charging cable to the DC 5V slot on the speaker and the other end to a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging input is 5V/500mA. A full charge typically takes approximately 2 hours of normal volume playback time.
Important: Do not use any fast charging methods, as this may damage the speaker's battery.
5.2 Power On/Off
To power on the speaker, long press the Power switch button. To power off, long press the same button again.
5.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing light). If not, short press the Power switch button to cycle through modes until Bluetooth mode is active.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "TG658" from the list of found devices to connect. You will hear a confirmation sound once paired.

5.4 TWS (True Wireless Stereo) Pairing
To pair two TG658 speakers for a stereo sound experience:
- Ensure both TG658 speakers are powered on and in Bluetooth mode, but not yet connected to any mobile device.
- Double-click the Power switch button on one of the speakers.
- You will hear a hint sound, and the button light on that speaker will stop flashing, indicating successful TWS pairing between the two speakers.
- Now, connect your mobile device to one of the paired TG658 speakers via Bluetooth as described in Section 5.3. Both speakers will now play audio in stereo.

6. Operating Instructions
6.1 Button Functions and Port Layout

- TF Slot (1): Insert a Micro SD card to play MP3/WAV format audio.
- USB Slot (2): Insert a USB disk to play MP3/WAV format audio.
- DC 5V Slot (3): Type-C USB port for charging the speaker.
- Next Song / Volume Up Button (+) (4): Short press for the next song. Long press to increase volume.
- Power Switch (5): Long press to power on/off. Short press to switch between playback modes (USB, TF Card, FM Radio, Bluetooth). Double-click for TWS pairing (see Section 5.4).
- Play/Pause Button (6): Short press to play/pause music (in USB, TF Card, Bluetooth modes). Long press to cycle through LED flashing light modes.
- Previous Song / Volume Down Button (-) (7): Short press for the previous song. Long press to decrease volume.
6.2 Playback Modes
The TG658 speaker supports multiple audio input sources:
- Bluetooth Mode: Connect wirelessly to your smartphone, tablet, or other Bluetooth-enabled devices.
- FM Radio Mode: Short press the Play/Pause button to automatically search and store radio stations. Short press again to stop searching.
- AUX Playback: Connect an external audio device using an AUX cable (not included) to the AUX input port.
- TF Card Playback: Insert a Micro SD card with MP3/WAV audio files into the TF slot.
- USB Disk Playback: Insert a USB flash drive with MP3/WAV audio files into the USB slot.
6.3 Hands-free Calling
When your mobile phone is paired via Bluetooth and a call comes in:
- Short press the Play/Pause button to answer the call.
- Short press the Play/Pause button again to hang up the call.
- Long press the Play/Pause button to reject an incoming call.
6.4 LED Lights
The speaker features dynamic LED lights. Long press the Play/Pause button to cycle through different LED flashing light modes.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery; Power button not pressed long enough | Charge the speaker fully; Long press the Power button to turn on. |
| No sound | Volume too low; Incorrect mode selected; Device not connected | Increase volume on speaker and connected device; Short press Power button to switch modes; Ensure Bluetooth device is paired or AUX/TF/USB is inserted correctly. |
| Cannot pair via Bluetooth | Speaker not in pairing mode; Device Bluetooth off; Too far from speaker | Ensure speaker is in Bluetooth mode (flashing light); Turn on Bluetooth on your device; Move device closer to speaker (within 10m). |
| Poor FM radio reception | Weak signal; No antenna connected | Insert the USB charging cable into the DC 5V slot; it acts as an antenna to improve signal strength. |
| TWS pairing fails | Speakers already connected to other devices; Incorrect pairing procedure | Ensure both speakers are in Bluetooth mode and disconnected from any devices before attempting TWS pairing. Follow TWS pairing steps carefully. |
8. User Tips
- For optimal FM radio reception, always connect the USB charging cable to the speaker. It functions as an external antenna, significantly improving signal clarity and station availability.
- To preserve battery life and prevent potential damage, avoid using fast chargers. Stick to the recommended 5V/500mA charging input.
- The speaker supports AUX input, allowing you to connect non-Bluetooth devices like older MP3 players or computers directly for wired audio playback.
- Experiment with the LED light modes by long-pressing the Play/Pause button to match your mood or environment.
9. Maintenance
9.1 Cleaning
Wipe the speaker with a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface or internal components.
9.2 Storage
When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery at least once every three months to maintain its health.
9.3 Battery Care
To maximize battery lifespan, avoid fully discharging the speaker frequently. Charge it when the battery is low, and disconnect it once fully charged. As mentioned, do not use fast charging adapters.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
A PDF version of this user manual may be available for download from the seller's product page or manufacturer's website. (Reference: User manual (PDF))