heimerdinger LB5C

Contents

Heimerdinger 18V/21V Lithium-Ion Battery and Charger User Manual

Model: LB5C

1. Introduction

This manual provides essential information for the safe and efficient use of your Heimerdinger 18V/21V rechargeable lithium-ion batteries and compatible chargers. Please read this manual thoroughly before initial use and retain it for future reference.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the battery and charger:

  • Do not expose the battery to fire or high temperatures.
  • Do not immerse the battery in water or other liquids.
  • Do not dispose of the battery in household waste. Recycle responsibly.
  • Use only the specified Heimerdinger charger for these batteries.
  • Do not short-circuit the battery terminals.
  • Keep batteries out of reach of children.
  • If the battery casing is damaged, do not use it.
Heimerdinger 2.0Ah 18V Lithium-Ion battery, side view with safety icons
Heimerdinger 2.0Ah 18V Lithium-Ion battery, side view. Note the safety icons indicating no fire, no water, and no disposal in trash.

3. Setup

3.1 Initial Charging

Before first use, fully charge the battery. Connect the charger to a suitable power outlet. Insert the battery into the charger, ensuring it clicks into place. The charger's indicator lights will show the charging status.

Heimerdinger battery charger with US plug and indicator lights
Heimerdinger battery charger with US plug. Red light indicates charging, green light indicates fully charged. Battery level icons show charge progression.

3.2 Inserting the Battery into a Tool

Align the battery with the battery slot on your compatible Heimerdinger power tool. Slide the battery firmly into place until you hear a click, indicating it is securely locked. To remove, press the release button(s) on the battery and slide it out.

Heimerdinger 2.0Ah 18V Lithium-Ion battery, top-front view
Top-front view of the Heimerdinger 2.0Ah 18V battery, showing the tool interface.

4. Operating Instructions

Once the battery is fully charged and securely inserted into a compatible Heimerdinger tool, the tool is ready for operation according to its own instruction manual. The battery provides consistent power output for optimal tool performance.

4.1 Battery Level Indicator

Some batteries or tools may feature an integrated battery level indicator. Refer to your specific tool or battery model for details on how to check the remaining charge.

5. Maintenance

5.1 Charging Practices

  • Do not overcharge the battery. Remove it from the charger once fully charged.
  • Avoid completely discharging the battery, as this can reduce its lifespan. Recharge when power is noticeably low.
  • Charge batteries in a well-ventilated area, away from flammable materials.

5.2 Storage

  • Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • For long-term storage, charge the battery to approximately 50% capacity.
  • Recharge batteries every 3-6 months during long-term storage to prevent deep discharge.

5.3 Cleaning

Clean the battery and charger terminals regularly with a dry, clean cloth to ensure good electrical contact. Do not use solvents or abrasive cleaners.

6. Troubleshooting

6.1 Battery Not Charging

  • Ensure the charger is properly plugged into a working power outlet.
  • Verify the battery is correctly seated in the charger.
  • Check for any visible damage to the battery or charger.
  • If the battery is extremely hot or cold, allow it to reach room temperature before charging.

6.2 Battery Not Powering Tool

  • Ensure the battery is fully charged.
  • Verify the battery is securely inserted into the tool.
  • Check if the tool itself is functioning correctly with another known-good battery.
  • Clean the battery and tool terminals.

6.3 Overheating

If the battery or charger becomes excessively hot during use or charging, immediately disconnect it and allow it to cool down. Do not use if overheating persists.

7. Specifications

FeatureDescription
BrandHeimerdinger
Model NumberLB5C
Rated Voltage18V (compatible 21V)
Battery TypeLithium-Ion
Capacity (2.0Ah)2000mAh (5 cells)
Capacity (4.0Ah)4000mAh (10 cells)
Charger Output2A or 4A (depending on variant)
Charger Plug TypesUS, UK, EU, AU (depending on variant)
OriginMainland China
CertificationCE
Package Dimensions34cm x 14cm x 9cm
Package Weight1.0 kg
Heimerdinger 4.0Ah 18V Lithium-Ion battery, top-front view
Top-front view of the Heimerdinger 4.0Ah 18V battery.

8. User Tips

  • Compatibility: This battery is specifically designed to work with Heimerdinger tools. It may not be compatible with tools from other brands. Ensure you own Heimerdinger tools before purchasing this battery.
  • Charger Matching: Always use the charger that came with your battery or a genuine Heimerdinger replacement charger. Using incompatible chargers can damage the battery or pose safety risks.

9. Warranty and Support

For warranty claims, technical support, or any questions regarding your Heimerdinger battery or charger, please contact the seller or Heimerdinger Official Store directly. Keep your purchase receipt as proof of purchase.

Free returns may be available within 90 days of purchase. Please refer to the seller's return policy for details.

© 2024 Heimerdinger. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.