1. Introduction
Thank you for choosing the NETUM NT-1200/NT-1202W Industrial Wireless 2D Barcode Scanner. This device is designed for robust performance in various environments, offering advanced scanning capabilities and versatile connectivity. This manual provides essential information for setting up, operating, and maintaining your scanner.
Key Features:
- Industrial-Grade Durability: IP67 waterproof, shock-proof (up to 3m/9.8ft drops), and dust-proof design, suitable for harsh working conditions.
- Versatile Connectivity: Supports 2.4G wireless, Bluetooth (HID/SPP/BLE modes), and USB cable connections for compatibility with various devices (Windows, Mac, Linux, Android, iOS).
- Superior Decoding Ability: High-resolution CMOS scan engine capable of reading a wide range of 1D and 2D barcodes, including QR Code, Data Matrix, PDF417, Aztec, Maxicode, UPC-A, EAN-13, Code128, Code39, and more.
- Long-Lasting Battery: Built-in 2600mAh battery provides 4-6 hours of continuous operation and up to 30 working days on standby (based on 2000 scans/day).
- Multifunction Charging Dock: Serves as a charging base and a 2.4G wireless receiver, enabling plug-and-play functionality and hands-free scanning.
- Multiple Scanning Modes: Manual trigger, continuous scanning, and auto-sensing modes for flexible operation.
- Storage Mode: Stores up to 100,000 barcodes when out of wireless range.
2. Product Overview
Package Contents:
- Barcode Scanner x 1
- USB Cable x 1
- Charging Base (Optional) x 1
- User's Guide x 1
Visual Components:
3. Setup Instructions
3.1 Unboxing and Initial Inspection
Carefully open the product packaging. Verify that all components listed in the 'Package Contents' section are present and undamaged. The package typically includes the scanner, a USB cable, a charging base (optional), and the user's guide.
3.2 Charging the Scanner
Before first use, ensure the scanner is fully charged. Connect the USB cable to the charging base and then to a power source (e.g., computer USB port or USB wall adapter). Place the scanner onto the charging cradle. The indicator light on the base will show charging status (red for charging, green for fully charged).
3.3 Connectivity Options
The scanner offers three ways to connect to your host device:
3.3.1 2.4G Wireless Connection (via Charging Dock)
- Connect the USB cable from the charging dock to your computer's USB port. The dock acts as the 2.4G wireless receiver.
- The scanner should automatically connect to the dock. This is a plug-and-play setup.
3.3.2 Bluetooth Connection
- Ensure your host device (laptop, PC, smartphone, tablet) has Bluetooth enabled.
- Power on the scanner by triggering the button.
- Scan the 'Bluetooth Transmission' barcode from the user manual to put the scanner into Bluetooth pairing mode. The LED light on the scanner will flash blue.
- On your host device, search for Bluetooth devices. The scanner should appear as 'RD barcode scanner' or similar.
- Select the scanner and click 'Connect'. The scanner's LED will turn solid blue once connected.
3.3.3 USB Wired Connection
For direct wired connection, simply connect the scanner to your device using the provided USB cable. This mode is typically plug-and-play and does not require the charging dock.
4. Operating Instructions
4.1 Scanning Modes
The scanner supports three primary scanning modes:
- Manual Trigger Mode (Default): Press the trigger button to scan each barcode.
- Continuous Scanning Mode: The scanner continuously emits a scan beam, reading any barcode that passes through its field of view.
- Auto-Sensing Scanning Mode: The scanner automatically detects a barcode in its field of view and scans it without needing to press the trigger. This is ideal for hands-free operation when placed on the charging dock.
To switch between modes, scan the corresponding setting barcodes found in your user manual or quick setup guide.
4.2 Scanning Barcodes
- Ensure the scanner is connected to your host device via your preferred method (2.4G wireless, Bluetooth, or USB).
- Point the scanner's window at the barcode you wish to scan.
- Press the trigger (if in manual mode) or allow the scanner to auto-sense (if in auto-sensing mode).
- A successful scan will typically be indicated by a beep and/or a green light. The decoded data will appear on your connected device.
4.3 Storage Mode
When operating out of range of Bluetooth or 2.4G wireless connectivity, the scanner can store up to 100,000 barcodes in its internal memory. To activate storage mode, scan the appropriate barcode from your user manual. Once back in range, scan the 'Upload Data' barcode to transmit the stored data to your host device.
5. Maintenance
5.1 Cleaning
To maintain optimal scanning performance, keep the scanner's window clean. Use a soft, lint-free cloth, slightly dampened with water or a mild cleaning solution. Avoid abrasive materials or harsh chemicals that could scratch the window or damage the housing.
5.2 Battery Care
The scanner features a 2600mAh battery. For best battery life:
- Charge the scanner fully before first use.
- Avoid completely draining the battery regularly.
- When not in use, place the scanner on its charging dock to keep it charged and ready.
5.3 Durability Features
The NETUM NT-1200/NT-1202W is built with industrial-grade durability:
- IP67 Waterproof: Capable of passing a 30-minute waterproof resistance test, allowing it to work under water.
- Industrial Impact Resistance: Designed to withstand 100 drops from 3 meters (9.8 feet) without damage.
- Dust Proof: Integrated housing protects against heavy dust.
6. Troubleshooting
- Scanner not connecting: Ensure the scanner is charged. For 2.4G, check if the USB receiver (in the charging dock) is properly plugged in. For Bluetooth, ensure Bluetooth is enabled on your device and the scanner is in pairing mode. Re-scan the 'Bluetooth Transmission' barcode if necessary.
- No data output: Verify the scanner is successfully connected to your device. Check if the correct scanning mode is selected. Ensure the cursor is in a text field on your device where the scanned data should appear.
- Poor scanning performance: Clean the scanner's window. Ensure the barcode is not damaged or poorly printed. Adjust the distance and angle of the scanner to the barcode.
- Frequent charging problems: Ensure the charging contacts on both the scanner and the dock are clean and free of debris. Use the original USB cable and a reliable power source.
- Scanner not turning on: The battery might be completely drained. Place it on the charging dock for an extended period.
7. Specifications
| Category | Specification | Value |
|---|---|---|
| General | Product Type | Bar Code Scanner |
| Model Number | NT-1200 / NT-1202W | |
| Brand Name | NETUM | |
| Origin | Mainland China | |
| Materials | ABS+TPU | |
| Novelty | New | |
| High-concerned chemical | None | |
| CPU | 32 Bit | |
| Memory | 4M (up to 100,000 codes) | |
| Certifications | CE, FCC, RoHS, IP67 | |
| Scanning Performance | Scanning Light Source | LED (White light LED for illumination, Red LED for focus) |
| Scan Element Type | CMOS (Global Shutter) | |
| Optical Resolution | 600*1200 | |
| Scan Speed | 200 scans/second | |
| Scan Breadth | A4 | |
| Precision | 1D≥4mil, 2D≥5mil | |
| Print Contrast Signal | ≥20% | |
| Scan Angle | Yaw(Skew)±55°, Pitch±55°, Rotate 360° | |
| Field of View | D:48°, H:40°, V:30° | |
| Decode Capability | 2D: QR Code, Data Matrix, PDF417, Aztec, Maxicode, Hanxin code 1D: EAN, UPC, Code 39, Code 93, Code 128, UCC/EAN 128, Codabar, Interleaved 2 of 5, ITF-6, ITF-14, ISBN, ISSN, MSI-Plessey, GS1 Databar, Code 11, Industrial 25, Standard 25, Plessey, Matrix 2 of 5 | |
| Connectivity | Interface Type | USB (Standard), RS232 (Optional) |
| Signal Connection Type | Bluetooth, 2.4G Wireless | |
| Bluetooth Protocols | 2.0, 3.0, 4.0, 4.2 (HID / SPP / BLE modes) | |
| 2.4G Communication Distance | 300m Visible Distance (with AP Long Distance Transmission) | |
| Bluetooth Communication Distance | 20m Visible distance | |
| Power | Battery Capacity | 2600mAh |
| Charging Time | Approx. 5 hours | |
| Power Voltage / Current | DC 5V±5% / Working: 125mA | |
| Environmental | Operating Temperature | -10°C ~ +50°C |
| Storage Temperature | -20°C ~ +70°C | |
| Humidity | 5%-95% (No Condensation) | |
| Standby Time | 3 minutes into standby | |
| Physical Dimensions | Scanner Size | 180mm x 65mm x 95mm |
| Base Size | 170mm x 100mm x 80mm | |
| Weight (with stand) | 388g |
8. User Tips
- Always keep the scanner's optical window clean for accurate and fast scans.
- For optimal wireless performance, ensure the charging dock (acting as the 2.4G receiver) is placed within a reasonable distance from the scanner and away from major obstructions.
- When using Bluetooth, ensure your device's Bluetooth is discoverable and that you've scanned the 'Bluetooth Transmission' barcode from the manual to initiate pairing.
- Utilize the auto-sensing mode with the charging dock for hands-free operation in high-volume scanning environments.
- If scanning a large number of barcodes out of range, remember to switch to storage mode to prevent data loss, and then upload the data once reconnected.
9. Warranty and Support
For any technical assistance or support, please contact NETUM customer service. Refer to the contact information provided in your product packaging or on the official NETUM website.
Operational Address: (Plant A1), No. 137, Taipingyang Industrial Zone, Xintang Town, Zengcheng, Guangzhou, Guangdong, China (Mainland)
Website: www.gzxlscan.com
E-mail: alvin@gzxlscan.com
Tel: 020-82684887
