TEYUN A6

Contents

TEYUN A6 6-Channel Audio Mixer Instruction Manual

Model: A6

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your TEYUN A6 6-Channel Audio Mixer. Please read this manual thoroughly before using the device to ensure proper and safe operation.

TEYUN A6 6-Channel Audio Mixer front view

Front view of the TEYUN A6 6-Channel Audio Mixer.

Safety Instructions

WARNING:

  • Please connect the power supply correctly according to the instructions of this manual to avoid fire or electric shock caused by improper connection operation.
  • Please avoid the device from the sun, rain or water directly into the body.
  • Be sure not to place containers with liquids or small metal objects on the machine body to prevent liquids or small metal objects from falling into the machine body, causing damage to the machine body or electric shock.
  • When the device is not used for a long time, please unplug the power.
  • Do not disassemble or modify this machine by yourself, otherwise you will lose the right to warranty.
  • Avoid placing heavy objects on the device or power cord.

OPERATIONS:

  • Do not scratch, bend, twist, stretch or heat the power cord to avoid damaging the power cord, causing fire or electric shock.
  • Please do not open the cover of the device without authorization. If you need internal inspection, maintenance and repair, please contact the agent dealer.
  • Do not modify the device without authorization to avoid damage to the equipment.
  • In case of lightning and lightning, please turn off the power switch of this device as soon as possible, and unplug the power plug from the power socket.
  • This device can only be used in conjunction with the AC power adapter of the attached host. If it is matched with other types of adapters, leakage or poor power supply may occur.

WHEN AN EXCEPTION OCCURS DURING OPERATION:

  • If the power cord is damaged (such as cut or exposed core), please purchase/replace it from the dealer.
  • When you find any abnormalities, such as smoke, odor, noise, etc., please turn off the power switch immediately and unplug the power plug.

ATTENTION:

  • When unplugging the power plug from the AC power outlet, please grasp the plug part and do not pull the cable directly.
  • Do not touch the power plug with wet hands.
  • If you move the device, please unplug the power plug from the AC power outlet first, and remove all phase connecting cables.
  • Please avoid using this device in the following situations:
    • Exposure to splashing oil and steam, such as near kitchen stoves, humidifiers, etc.
    • Unstable surface, such as a shaking table or slope.
    • Exposure to excessive heat, such as in a car with closed windows, a place exposed to direct sunlight.
    • Exposed to moisture or dust.
  • Do not place the power cord near the heater to avoid melting of the wire and cause fire/electric shock.
  • Please use this equipment in a well-ventilated environment.
  • If you will not use the device for a long time, please unplug the power plug from the AC outlet.

NOTE:

When the device is in normal working condition for a long time, the temperature of the body may rise to 15-20°C. However, if the external environment temperature exceeds 30°C, the temperature of the plastic casing at the power input socket may exceed 50°C, please be careful to avoid burns.

Package Contents

The following items are included in your TEYUN A6 Audio Mixer package:

ItemQuantityImage
Audio Mixer (TEYUN A6)1 pieceTEYUN A6 Audio Mixer
USB Cable (1 Meter)1 pieceUSB Cable
Power Adapter1 piecePower Adapter

Packing list for the TEYUN A6 Audio Mixer.

Product Overview and Features

The TEYUN A6 is a professional 6-channel stereo mixer designed for various audio applications, including studio recording, live broadcasting, and musical instrument mixing. It integrates analog mixing capabilities with digital sound card functions, offering versatility and high-quality audio processing.

Key Features:

  • 6 Channels (4 mono + 1 stereo)
  • USB power supply: 5V DC
  • Bluetooth function for wireless audio input
  • HPF (High-Pass Filter) for guitar
  • Mobile broadcast podcast function
  • USB Play and Record
  • 24 DSP Effects

Specifications

Technical parameters for the TEYUN A6 Audio Mixer:

ParameterValue
Frequency Response+0.5dB/-2.0dB (20Hz to 20kHz), refer to the rated output level @1kHz, GAIN knob: medium
Total Harmonic Distortion (THD+N)0.05%@+10dBu (20Hz to 20kHz), GAIN knob: Medium
S.N.R (20Hz to 20kHz)-82dBu
Crosstalk (1kHz)*2-80dB
Input ChannelsMIC*4/2REC/PC/2LINE/USB/BT/3.5MINI
Output ChannelsSTEREO OUT:2, PHONES:1, 3.5MINI MAIN PH OUT:1/2. GROUP PH:1. 3.5 MINI LOOP BACK OUTPUT:2.REC
BussStereo:1; GROUP:1.
HPF (Mono)80Hz, 12dB/octave (CH3, 4)
EQ HIGH Gain+15dB/-15dB, Frequency: 10kHz slope
EQ LOW Gain+15dB/-15dB, Frequency: 100Hz slope
PEAK LEDLights up when signal reaches 3dB below distortion
MAIN STEREO LEVEL knobGreen light on at -10dB, red light on at 3dB below distortion
Input/Output LevelMIC(-60dB) LINE OUTPUT(-40dB) MAX OUT(+12dB)
USB Audio2IN /2OUT USB audio 2.0 compatible
Effect Category24 DSP (Digital effect processing)
Phantom Power Supply VoltageDC 48V (for CH1-2 XLR)
Voltage AdapterDC 5V/2.0A
Dimensions (L x W x H)22.5 cm x 20.5 cm x 5.5 cm (8.9 in x 8.1 in x 2.2 in)
Weight1.25 kg

Mixer dimensions: 22.5 cm x 20.5 cm x 5.5 cm.

Mixer dimensions

Setup Guide

1. Power Supply

The TEYUN A6 mixer can be powered in several ways:

  • Power Adapter: Use the included DC 5V 2A power adapter connected to a 110V/220V AC outlet.
  • Computer USB: Connect the mixer to a computer via the USB cable. This also enables sound card functionality.
  • Power Bank: Use a large-capacity 5V/2.5A power bank for portable operation.

Important Note:

  • The mixer requires a 5V/2.5A power supply for normal operation. Do not use adapters with unknown parameters.
  • For high-quality recording via PC USB power, an advanced PC device is recommended. This mode is suitable for single-person recording or music appreciation.
Power supply options for TEYUN A6 mixer

Powering the mixer via adapter, computer, or power bank.

2. Power Supply Interfaces

The mixer features two types of USB interfaces for power and data:

  • Micro B: Press down the button to select this interface. It is for power supply ONLY.
  • Type-B: Bounce up the button to select this interface. It supports both power supply and data transmission (for computer connectivity).
Micro B and Type-B USB interfaces

Location of Micro B and Type-B USB interfaces on the mixer.

3. Connecting Microphones

The mixer supports both dynamic and condenser microphones on channels 1-4 via MIC/LINE input jacks (XLR and phone plugs).

Dynamic Microphones:

  • Connect a dynamic microphone using an XLR plug to channels 1 or 2.
  • DO NOT turn on the +48V phantom power when using a dynamic microphone, as this may damage the microphone.
  • Using a 6.3mm (1/4 inch) plug for dynamic microphones may result in very low sound output.
Connecting a dynamic microphone to the mixer

Correct connection for a dynamic microphone (XLR) and incorrect (6.3mm).

Condenser Microphones:

  • Connect a condenser microphone using an XLR plug to channels 1 or 2.
  • Ensure your condenser microphone supports +48V phantom power.
  • Press the +48V PHANTOM (CH1-2) switch to supply power to the condenser microphone. The LED indicator will light up.
Connecting a condenser microphone and activating phantom power

Connecting a condenser microphone and activating +48V phantom power.

Phantom power switch for channels 1 and 2

The +48V phantom power switch is only for channels 1 and 2 XLR inputs.

4. Connecting to a Computer

The TEYUN A6 mixer functions as a sound card when connected to a computer, allowing for audio transmission in both directions.

  1. Ensure the power supply interface is set to Type-B (button bounced up).
  2. Connect the mixer to your computer using the provided USB cable (Type-A to Type-B).
  3. On the mixer, press down the FX/PC REC button of the desired channel.
  4. Press the MODE button to select "PC" status on the multifunctional LED display.
Diagram of mixer connected to PC

Mixer connected to a PC for two-way audio signal transmission.

Diagram of mixer connected to PC

Mixer connected to a PC for two-way audio signal transmission.

Steps to connect mixer to PC

Visual guide for connecting the mixer to a PC and selecting PC mode.

5. Connecting to a Mobile Device (for Broadcast/Podcast)

The mixer supports mobile broadcast and podcast functions via a TRRS socket connection. Note that the TRRS cable is not included.

  1. Connect your microphone to an audio mixer channel (e.g., Channel 1).
  2. Connect your mobile device to the mixer via the 3.5MM audio connector input terminal (TRRS socket).
Diagram of mobile broadcast/podcast setup

Mobile broadcast/podcast setup with mixer and smartphone.

Connecting mobile for recording

Connecting a mobile device to the mixer for recording. (Cable not included)

Operating Instructions

1. Controls and Functions Overview

The TEYUN A6 mixer features various knobs and switches for precise audio control. Refer to the diagram below for component identification.

TEYUN A6 6-Channel Audio Mixer front panel controls

Front panel layout of the TEYUN A6 Audio Mixer.

  1. {MIC/LINE} Mono Input Jack (Channels 1-4): Connect microphones, musical instruments or audio equipment (CD players, etc.), support XLR and phone plugs.
  2. {PHANTOM+48V) Switch (Channel 1-2): When the switch is turned on, the LED light is on, indicating that the device (MIC/LINE) mono input port 1 and 2 can be used for DC-48V phantom power supply. If you do not need phantom power supply, be sure to set this switch to off. To prevent noise and damage to external equipment, please observe the following: When the microphone or other equipment connected on channel 1-2 does not require phantom power supply, make sure that the switch is off. Make sure the {LEVEL), EFX/G1, and G2 knobs of 1-2 are set to the minimum.
  3. {HPF} (High-pass filter) Switch: After the high-pass filter switch is turned on, it attenuates frequencies below 80Hz. When speaking into the microphone, you may need to turn on this switch to minimize vibration and breath sounds.
  4. {PHANTOM+48V LED Indicator (Channel 1-2): The LED lights up, indicating that the device (MIC/LINE} mono input ports 1 and 2 can be used for DC-48V phantom power supply.
  5. {GAIN} Knob: Control the basic volume of channels 1-4. When singing and playing at maximum volume, the corresponding (PEAK) LED flashes briefly.
  6. Equalizer (EQ Knob) - HIGH/LOW: Use {HIGH} (high frequency band) and {LOW} (low frequency band) knobs to adjust the sound quality. If you don't need to adjust the sound quality, you can set the knob's mark to the (vertical) position.
  7. {FX}/{G1/G2}, LINE{G1.G2} Knob: {FX): Used to adjust the volume of the signal sent from each channel. {FX}/{G1/G2}, LINE{G1.G2): used to adjust the volume of the signal sent from each channel (G1.G2 group output, PC recording output, 3.5MM jack}.
  8. {PRE} Effect and Grouping Signal Source Switch: This switch can choose whether to send the signal to the (FX), (G1, G2} bus, whether it occurs after the equalizer, before the channel (LEVEL) knob, or after the channel (LEVEL) knob. If this switch is turned on, adjust The audio console sends the signal before the (LEVEL) knob to the (FX)(G1, G2) bus, so that it is not affected by the {LEVEL} knob.
  9. {LEVEL} Knob: Used to adjust the volume balance between each channel, usually this switch is set to the "three o'clock" position.
  10. {MAIN LEVEL} Knob: Control the total volume output from {MAIN OUT).
  11. {MAIN/PH} Knob: Control the volume output from the {MAIN PH3.5} and {MAIN PH6.5} jacks.
  12. 3.5MM{PH} Output Jack: Used to connect headphones. Support stereo PH plug.
  13. {FX MUTE} Switch: When this switch is turned on, all effects are interrupted and 24 effects cannot be operated. After turning off this switch, the effect state before the interruption can be restored.
  14. G1, G2 Signal, Four-pole Connector Output/Input: Can output signal to mobile phone or other audio equipment with the same function.
  15. Channel 1-4 [MIC/LINE] FX Volume Knob: Adjust the volume effect of the microphone/audio device.
  16. Power Indicator: Press (27) the power switch, the indicator light is on, and the equipment is powered normally.
  17. MAIN Signal Light: The signal light is always on, it indicates that the signal is stable.
  18. MAIN Volume Level Peak Indicator: When the input volume is too high, this light is on; if it lights up frequently, please adjust the {GAIN} knob (5) to the left, or adjust the channel volume (11) and main output volume (12) to the left to decrease volume.
  19. Auxiliary Input Control (USB, PC, BT, LINE/G1, G2), PC Recording, USB Recording Volume.
  20. {PROGRAM} 24 Effect Selection Buttons (UP/DOWN): Press the "UP" and "DOWN" buttons to select one of 24 effects. When the number in the display stops flashing, it means that the effect has been selected. Note: Keep pressing "UP"/"DOWN", you can select an effect by referring to the effect list on the body.
  21. Auxiliary Selection of USB, PC, BT, LINE/G1, G2, PC Recording, USB Recording Input: The first key on the right is the mode selection key. Press this key to select different signal input sources one by one. The signal source can only select one of all input devices. Note: When there is no USB and no PC connection, you can only switch to BT/LINE mode; the signals of PC and USB cannot be loaded at the same time.
    • USB Mode: After disconnecting the PC, you can insert the USB and use this mode. When the USB mode is selected to read the data in the USB, the display screen can simultaneously display the current status. Press the second button on the right to play the next song, and the third button on the right to skip to the previous song. The fourth button on the right is to pause/continue playing.
    • BT Mode: When connecting to other devices to play in Bluetooth mode, insert a USB device, you can enable USB recording by long pressing the fourth button on the right, and long pressing again to end USB recording.
    • PC Mode: Please remove the USB before using the PC mode to avoid device errors. After connecting to the PC, switch to PC mode, and you can use PC recording software to record/live.
    • LINE Mode: In this mode, the signals of channel 5/6 can be added to the G1 and G2 groups via the LINE/G1 and G2 knobs.
  22. Multifunctional LED Display: Simultaneously display the current operating status (USB, PC, BT, LINE/G1, G2, PC, USB).
  23. PC REC, PC Recording Signal Selection Switch: Press the PC REC button, the PC signal source is a mixture of the music being played by the PC and the EFX/G1, G2 signal; after the PC REC button is pressed, the real-time recording signal source of the PC is EFX/G1, G2.
  24. USB Port: The USB port on this device can update the application program of the device/read the audio file in the USB by inserting the USB.
  25. MAIN OUTPUT: MAIN OUTPUT is the main output signal port.
  26. REC: REC is the recording port: Traditional external recording equipment can be connected through the REC port, (12) (MAIN LEVEL} knob can adjust the level here.
  27. REC Stereo Signal Input Jack.
  28. 1/4 (6.35MM) Stereo Signal Input Jack.
  29. 3.5MM Audio Connector Input Terminal: 3.5MM audio connector input terminal, which can be connected to the audio input of mobile phones or the audio input of MP3, MP4 and other players, through a four-pole cable1 (top) 2 (ring) as stereo (L, R) input, the input high and low bass adjustment is not available.

2. Effect Adjustment (24 DSP Effects)

The mixer offers 24 digital signal processing effects. The 24th effect is "VOCAL" and has no original voice effect.

List of 24 DSP effects

List of 24 DSP effects available on the TEYUN A6 mixer.

Adjusting Effect Volume:

  1. Rotate the "FX/PC REC" knob to increase or decrease the effect volume for the channel.
  2. Press down the "FX/PC REC" button to enable the effect input to the channel. Bounce it up to disable.
Adjusting FX/PC REC knob

Rotate the FX/PC REC knob to adjust effect volume.

FX/PC REC button for effect input

Pressing the FX/PC REC button to enable effect input.

Muting Effects:

If you do not need effects, press the "FX MUTE" button. The effect display will show "24", indicating no effect is applied.

Muting FX button

Pressing the MUTE FX button to disable effects.

3. Bluetooth Operation

Connect your mobile device wirelessly via Bluetooth for audio input.

  1. Pairing: Press the MODE button until "BLUE" appears and flashes on the display, indicating it's waiting for pairing.
  2. Connect: On your mobile device, open Bluetooth settings, find and select "A6" to connect. The "BLUE" indicator on the mixer will stop flashing once connected.
  3. Volume Control:
    • Rotate the PC/BT/MP3 knob to adjust the Bluetooth input volume.
    • Rotate the MAIN knob to adjust the overall main output volume.
Bluetooth pairing display

"BLUE" flashing indicates the mixer is waiting for Bluetooth pairing.

Bluetooth connected on mobile

Mobile device showing successful Bluetooth connection to "A6".

Adjusting Bluetooth and Main Out volume

Adjusting Bluetooth input volume via PC/BT/MP3 knob and main output volume via MAIN knob.

4. USB Playback

Play audio files directly from a USB stick. Supported formats include MP3, WAV, WMA, FLAC.

  1. Insert a USB stick into the USB port.
  2. Ensure the power supply interface is set to Type-B (button bounced up).
  3. Press the MODE button to select "USB" status on the display.
  4. Use the navigation buttons (play/pause, next, previous) to control playback.
  5. Volume Control:
    • Rotate the PC/BT/MP3 knob to adjust the USB playback volume.
    • Rotate the MAIN knob to adjust the overall main output volume.
USB Playback steps

Insert USB stick into the mixer.

USB Playback steps

Steps for USB playback: Insert USB, select USB status, then MP3 mode.

Adjusting USB and Main Out volume

Adjusting USB input volume via PC/BT/MP3 knob and main output volume via MAIN knob.

5. USB Recording

Record audio directly to a USB stick.

  1. Insert a USB stick into the USB port.
  2. Ensure the power supply interface is set to Type-B (button bounced up).
  3. Press down the FX/PC REC button of the channel you wish to record.
  4. Press the MODE button to select "BLUE" status (this enables recording functionality in BT mode, as per seller description).
  5. Long press the PLAY/PAUSE button to start recording. A "REC" mark will appear on the display.
  6. Long press the PLAY/PAUSE button again to stop recording.
  7. Adjusting Recording Volume:
    • Rotate the input channel volume knob to adjust the recording level.
    • If you do not want effects in your recording, press the "MUTE FX" button.
  8. Playing Recorded Files:
    • Press MODE to "USB" status.
    • Press the "Pre-button" (previous track) to navigate to the last recorded file, which will then play automatically.
USB Record preparation steps

Steps for preparing USB recording: Insert USB, select USB status, press FX/PC REC, then select Blue status.

Long press PLAY/PAUSE to record

Long pressing the PLAY/PAUSE button to start/stop USB recording.

Adjusting channel volume for recording and muting FX

Adjusting channel volume for recording and muting effects.

Playing recorded file from USB

Playing a recorded file from the USB stick.

6. Computer Playback and Recording

Once connected to a computer (as described in Setup Guide), you can use the mixer for computer audio playback and recording.

Playing Music from Computer:

  1. Open your computer's music playback program and start playing music.
  2. Rotate the PC/BT/MP3 knob on the mixer to adjust the volume of the audio coming from the computer.
  3. Rotate the MAIN knob to adjust the overall main output volume.
Playing music from PC and adjusting volume

Adjusting PC audio input volume and main output volume.

Recording from Computer:

  1. Open your computer's recording software (e.g., Audacity).
  2. Select the TEYUN A6 mixer as both the microphone (input device) and speaker (output device) in your software settings.
  3. Rotate the channel volume knob and the FX/PC REC knob on the mixer to adjust the recording volume.
  4. If you do not want effects in your recording, press the "FX MUTE" button.
Recording from PC and adjusting volume

Adjusting recording volume for PC recording.

Muting FX for PC recording

Muting effects during PC recording.

7. Mobile Recording Volume Adjustment

When recording to a mobile device (as described in Setup Guide):

  1. Adjust the volume of the input channel on the mixer.
  2. Adjust the volume of the main output (MAIN knob).
Adjusting mobile record volume

Adjusting input channel volume and main output volume for mobile recording.

8. Mobile Music Playback Volume Adjustment

When playing music from a mobile device to the audio mixer:

  1. Adjust the output volume on your mobile device.
  2. Adjust the CH5/6 volume knob on the mixer.
  3. Adjust the MAIN volume knob on the mixer.
Adjusting mobile music volume

Adjusting CH5/6 and MAIN volume knobs for mobile music playback.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the mixer. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the mixer in a cool, dry place away from direct sunlight, high temperatures, and humidity.
  • Handling: Avoid dropping or subjecting the mixer to strong impacts.
  • Power Off: Always turn off the mixer and unplug it from the power source when not in use for extended periods.

Troubleshooting

  • No Sound Output:
    • Check all cable connections (microphones, speakers, headphones, power).
    • Ensure the mixer is powered on and the power indicator is lit.
    • Verify that channel GAIN and LEVEL knobs, as well as the MAIN LEVEL knob, are not set to minimum.
    • If using a condenser microphone, ensure +48V phantom power is activated for channels 1-2.
    • If using a dynamic microphone, ensure +48V phantom power is OFF.
    • Check the selected input mode (USB, PC, BT, LINE) on the multifunctional LED display.
  • Distorted Sound:
    • Reduce the GAIN knob for the input channel.
    • Reduce the channel LEVEL knob or MAIN LEVEL knob.
    • Check the MAIN Volume Level Peak Indicator; if it lights up frequently, reduce input levels.
    • Ensure cables are not damaged and are properly connected.
  • Bluetooth Not Connecting:
    • Ensure "BLUE" is flashing on the mixer's display, indicating pairing mode.
    • Check your mobile device's Bluetooth settings and ensure "A6" is selected.
    • Make sure no other devices are currently connected to the mixer via Bluetooth.
  • USB Playback/Recording Issues:
    • Ensure the USB stick is properly inserted and formatted (FAT32 recommended).
    • Verify the audio file format is supported (MP3, WAV, WMA, FLAC).
    • Ensure the mixer is in "USB" mode.
    • For recording, ensure the correct channel's FX/PC REC button is pressed down and the display shows "REC".
  • PC Connectivity Problems:
    • Ensure the Type-B USB interface is selected (button bounced up).
    • Verify the USB cable is securely connected to both the mixer and the computer.
    • Check your computer's sound settings to ensure the TEYUN A6 is selected as the input/output device.
    • Ensure the mixer is in "PC" mode.

User Tips

  • Optimal Recording: For best recording quality, especially when using a computer, ensure your PC is capable of handling audio processing efficiently.
  • Effect Experimentation: Explore the 24 DSP effects to find the perfect sound for your vocals or instruments. Remember that effect #24 (VOCAL) is a dry signal.
  • Cable Management: Keep your cables organized and avoid tangling to prevent damage and signal interference.
  • Phantom Power Caution: Always double-check if your microphone requires phantom power before activating it to prevent damage to dynamic microphones.

Warranty and Support

TEYUN products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact your local dealer or the point of purchase. Keep your purchase receipt as proof of purchase.

Due to continuous product improvement, technical parameters in this manual are subject to modification without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.