TKLBLS Z-6

Contents

TKLBLS Z-6 Professional 6-Channel Audio Mixer User Manual

Model: Z-6 | Brand: TKLBLS

1. Introduction

The TKLBLS Z-6 Professional 6-Channel Audio Mixer is a versatile and compact mixing console designed for studio recording, live performances, karaoke, and DJ applications. It features 6 input channels, a built-in 99 DSP effects processor, 48V phantom power for condenser microphones, USB connectivity for computer integration, and Bluetooth 5.0 for wireless audio streaming. This manual provides detailed instructions for setting up, operating, and maintaining your mixer to ensure optimal performance.

TKLBLS Z-6 Professional 6-Channel Audio Mixer with features highlighted
Figure 1: TKLBLS Z-6 Professional 6-Channel Audio Mixer overview, highlighting 99 special effects, fidelity sound quality, computer connectivity, Bluetooth 5.0, 48V phantom power, and earphone listening.

2. Key Features

  • 6-Channel Input: Accommodates multiple microphones and line-level instruments.
  • 99 DSP Effects Processor: Integrated digital signal processor with 99 preset effects including Reverb, Delay, Flanger, Chorus, Echo, and more.
  • 48V Phantom Power: Global switch for powering condenser microphones.
  • USB Connectivity: Direct connection to a computer for audio recording and playback.
  • Bluetooth 5.0: Wireless audio input for streaming music from compatible devices.
  • High-Fidelity Audio: Equipped with new fidelity chips for lower noise and improved sound restoration.
  • 3-Band EQ: Treble, Mid (Tenor), and Bass adjustment knobs on each channel for precise tone control.
  • Compact Design: Durable hard plastic construction, lightweight and portable.
  • Monitoring: Dedicated earphone output for private monitoring.
Icons representing mixer features: 99 Special Effects, Fidelity sound quality, Connectable computer, Wireless Bluetooth 5.0, 48V Phantom power supply, Listening earphone.
Figure 2: Visual representation of the mixer's core features.
Close-up of a DSP Intelligent Chip on a circuit board, indicating new fidelity audio processing.
Figure 3: The internal DSP Intelligent Chip for high-fidelity audio processing.

3. Package Contents

Upon unpacking, please ensure all items listed below are present:

  • TKLBLS Z-6 Professional 6-Channel Audio Mixer
  • AC/DC Power Adaptor (Input: 100-240V AC, Output: 12V DC, 2A)
  • Owner's Manual

Note: USB cables, monitor cables, and other audio cables are not included and must be purchased separately.

TKLBLS Z-6 Professional 6-Channel Audio Mixer in black.
Figure 4: The TKLBLS Z-6 Professional 6-Channel Audio Mixer.

4. Controls and Functions

Familiarize yourself with the various controls and connectors on your mixer:

TKLBLS Z-6 Mixer showing 48V Phantom Switch and a list of 99 DSP effects.
Figure 5: Overview of mixer controls, including the 48V Phantom Switch and DSP effects list.
Mixer with labels pointing to Treble, Tenor (Mid), and Bass adjustment knobs.
Figure 6: Detail of the 3-band EQ controls: Treble, Tenor (Mid), and Bass.

4.1 Input Channels (MIC / LINE)

  • XLR Input: For microphones.
  • 1/4" TRS Input: For line-level instruments or microphones.
  • PAD Button: Attenuates the input signal by 26dB for very loud sources.
  • HPF Button: Activates a High-Pass Filter at 80Hz to reduce low-frequency rumble.
  • GAIN Knob: Adjusts the input sensitivity for each channel.
  • HIGH Knob: Adjusts the high-frequency (treble) equalization.
  • MID Knob: Adjusts the mid-frequency (tenor) equalization.
  • LOW Knob: Adjusts the low-frequency (bass) equalization.
  • FX Knob: Controls the amount of signal sent to the internal DSP effects processor.
  • PAN Knob: Adjusts the stereo position (left/right) of the channel's signal.
  • PEAK LED: Illuminates when the input signal is too high, indicating potential clipping.
  • LEVEL Knob: Adjusts the output level of the individual channel to the main mix.

4.2 Digital Audio Player Section

  • Display: Shows current mode, track number, or effect number.
  • USB Port: For connecting to a computer or USB flash drive (for playback).
  • PREV / NEXT Buttons: Navigate tracks or DSP effects.
  • PLAY / PAUSE Button: Starts or pauses playback.
  • MODE Button: Switches between USB, Bluetooth, and MP3 modes.
  • Bluetooth Indicator: Lights up when Bluetooth is active and connected.

4.3 Main Mixer Section

  • FX SEND Output: Sends signal to external effects processors.
  • AUX SEND Output: Auxiliary send for monitors or other devices.
  • PHONES Output: 1/4" TRS stereo output for headphones.
  • STEREO OUT (L/R): XLR and 1/4" TRS outputs for connecting to main speakers or amplifiers.
  • 48V PHANTOM Switch: Activates 48V phantom power for all XLR microphone inputs.
  • DSP Effects (99): Integrated effects processor.
  • PROGRAM Knob: Selects one of the 99 DSP effects.
  • PARAMETER Knob: Adjusts a specific parameter of the selected DSP effect.
  • PHONES Level Knob: Controls the volume of the headphone output.
  • MAIN LEVEL Fader: Controls the overall output volume of the main stereo mix.

4.4 Rear Panel

  • DC 12V-2A Input: Connect the included power adaptor here.
  • POWER Switch: Turns the mixer on or off.
Side view of the TKLBLS Z-6 mixer showing the DC power input and power switch.
Figure 7: Side view showing the DC power input and power switch.

5. Setup Guide

  1. Unpack the Mixer: Carefully remove the mixer and all accessories from the packaging.
  2. Power Connection:
    • Ensure the mixer's POWER switch is in the OFF position.
    • Connect the included AC/DC power adaptor to the DC 12V-2A input on the rear panel of the mixer.
    • Plug the power adaptor into a suitable electrical outlet. It is recommended to use a grounded outlet to minimize noise.
  3. Connect Output Devices:
    • Connect your main speakers or amplifier to the STEREO OUT (L/R) XLR or 1/4" TRS jacks.
    • Connect your headphones to the PHONES 1/4" TRS jack for monitoring.
  4. Connect Input Devices:
    • Microphones: Connect dynamic microphones to the XLR or 1/4" TRS inputs. For condenser microphones, connect via XLR and ensure the 48V PHANTOM switch is engaged (see Section 6.2).
    • Instruments/Line-Level Devices: Connect keyboards, guitars (with a DI box if needed), or other audio devices to the 1/4" TRS LINE inputs.
    • Computer (USB): Connect a USB cable (not included) from the mixer's USB port to your computer. The mixer should be recognized as an audio device.
  5. Initial Power On: Once all connections are made, switch the mixer's POWER button to ON.

6. Operating Instructions

6.1 Basic Operation

  1. Set Initial Levels: Before playing any audio, set all channel LEVEL knobs and the MAIN LEVEL fader to their minimum positions.
  2. Adjust Input Gain:
    • For each active input channel, speak into the microphone or play your instrument at its typical volume.
    • Slowly increase the GAIN knob for that channel until the PEAK LED flashes only occasionally on the loudest peaks. If the PEAK LED stays lit, reduce the GAIN.
    • Use the PAD button for very loud sources to prevent clipping.
    • Engage the HPF button if you need to reduce low-frequency noise from microphones.
  3. Adjust Channel Levels: Slowly raise the LEVEL knob for each channel to blend them into the main mix.
  4. Adjust Main Output: Gradually increase the MAIN LEVEL fader to achieve the desired overall volume through your main speakers.
  5. Monitor with Headphones: Adjust the PHONES Level knob to set your headphone monitoring volume.

6.2 Using 48V Phantom Power

If you are using condenser microphones, they require 48V phantom power. Locate the 48V PHANTOM switch on the mixer. Press this switch to activate phantom power for all XLR microphone inputs. Ensure dynamic microphones are not connected via XLR when phantom power is active, or consult your microphone's manual. Phantom power is applied globally to all XLR inputs.

6.3 Equalization (EQ)

Use the HIGH, MID, and LOW knobs on each channel to shape the tone of your audio source. Turning a knob clockwise boosts the frequency, while turning it counter-clockwise cuts it. The center position is flat (no boost or cut).

6.4 DSP Effects

  1. Select Effect: Use the PROGRAM knob in the Digital Audio Player section to cycle through the 99 built-in effects. The display will show the effect number (e.g., 00-39 for Reverb).
  2. Adjust Effect Parameter: Use the PARAMETER knob to fine-tune a specific aspect of the selected effect (e.g., decay time for reverb, delay time for delay).
  3. Apply to Channels: Use the FX knob on each individual input channel to send a portion of that channel's signal to the DSP effects processor.

DSP Effect Categories:

  • 00-39: Reverb
  • 40-49: Delay
  • 50-59: Pingpong Delay
  • 60-69: Flanger
  • 70-79: Key Echo
  • 80-84: Chorus+Echo
  • 85-89: Auto Wah+Echo
  • 90-93: Voice Changer
  • 94-96: Tremolo
  • 97-99: Rotary Speaker

6.5 USB Connectivity (PC)

Connect the mixer to your computer via a USB cable. The mixer will typically be recognized as a standard audio input/output device. You can then use it with Digital Audio Workstations (DAWs) for recording your mix or for playing back audio from your computer through the mixer.

6.6 Bluetooth 5.0

  1. Press the MODE button on the Digital Audio Player section until "BLUE" or a Bluetooth icon appears on the display.
  2. On your smartphone or Bluetooth-enabled device, search for available Bluetooth devices.
  3. Select "TKLBLS Z-6" (or similar name) to pair.
  4. Once connected, you can stream audio wirelessly from your device to the mixer.
TKLBLS Z-6 Mixer connected via Bluetooth 5.0 to a smartphone playing music.
Figure 8: Connecting to the mixer via Bluetooth 5.0.

7. User Tips

  • Stereo Simulation: While each input channel is mono, you can use the PAN knobs to position sounds within the stereo field, creating a sense of width.
  • Grounding for Noise Reduction: If you experience background noise or hum, ensure your mixer's power adapter is plugged into a grounded electrical outlet.
  • Cable Management: Invest in good quality USB and audio cables, as they are not included with the mixer.
  • Initial Knob Stiffness: Some control knobs may feel stiff initially; this is normal and will ease with use.
  • Phantom Power Caution: Remember that the 48V phantom power switch activates power for all XLR inputs simultaneously. Ensure only condenser microphones requiring phantom power are connected via XLR when it's active.
  • Portability: The compact and lightweight design makes this mixer ideal for mobile setups, home studios, karaoke, and small DJ events.

8. Troubleshooting

Problem Possible Cause Solution
No sound output
  • Mixer not powered on.
  • Main LEVEL fader or channel LEVEL knobs are down.
  • Output cables disconnected or faulty.
  • Input GAIN too low.
  • Ensure POWER switch is ON.
  • Increase MAIN LEVEL fader and relevant channel LEVEL knobs.
  • Check all output cable connections and test with known working cables.
  • Increase input GAIN until PEAK LED flashes occasionally.
Humming or static noise
  • Ground loop issue.
  • Poor quality cables.
  • Interference from other electronics.
  • Ensure mixer is plugged into a grounded outlet.
  • Try different, shielded audio cables.
  • Move mixer away from power supplies, computers, or other noisy devices.
Microphone not working (condenser)
  • 48V PHANTOM power is off.
  • Faulty microphone or cable.
  • Engage the 48V PHANTOM switch.
  • Test with a different microphone and XLR cable.
Computer not recognizing mixer via USB
  • USB cable disconnected or faulty.
  • Incorrect audio device selected on computer.
  • Ensure USB cable is securely connected to both mixer and computer. Try a different USB port or cable.
  • Check your computer's sound settings and DAW preferences to ensure the mixer is selected as the input/output device.
Bluetooth not connecting
  • Mixer not in Bluetooth mode.
  • Device too far or already connected to another device.
  • Press MODE button until Bluetooth icon/text appears.
  • Ensure your device is within range and not connected to another Bluetooth device.

9. Specifications

Feature Specification
Model Number Z-6
Brand Name TKLBLS
Type Mixers
Channels 6
DSP Effects 99 Programs (Reverb, Delay, Flanger, Chorus, Echo, etc.)
Phantom Power +48V (Global Switch)
USB Connectivity Yes (for PC audio I/O)
Bluetooth Version 5.0
Power Source DC 12V-2A (AC/DC Adaptor included)
Inbox Adaptor Yes
Plug Type US Plug (may vary by region, check adaptor)
Product Dimensions (L x W x H) 32 cm x 30 cm x 8 cm (approx. 12.6 x 11.8 x 3.1 inches)
Product Weight 1.496 kg (approx. 3.3 lbs)
Certification CE
Origin Mainland China

10. Maintenance

  • Cleaning: Use a soft, dry, lint-free cloth to clean the mixer's surface. Avoid using abrasive cleaners, solvents, or waxes, as they may damage the finish or controls.
  • Storage: When not in use, store the mixer in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
  • Handling: Handle the mixer with care. Avoid dropping it or subjecting it to strong impacts.
  • Ventilation: Ensure proper ventilation around the mixer to prevent overheating. Do not block any ventilation openings.
  • Servicing: Do not attempt to service the mixer yourself. Refer all servicing to qualified service personnel. Unauthorized disassembly will void the warranty.

11. Frequently Asked Questions (FAQ)

Q: Can I record separate channels to a DAW?
A: The mixer typically outputs a stereo mix via USB to a Digital Audio Workstation (DAW). It is generally not designed for multi-track recording of individual channels separately to a computer.
Q: Can I record directly to a USB flash drive without a PC?
A: The USB port on the Digital Audio Player section is primarily for playing back audio from a USB flash drive. Direct recording of the mixer's output to a USB stick without a computer is not a specified feature.
Q: Does the mixer include a compressor?
A: No, the TKLBLS Z-6 mixer does not feature built-in compressors on its channels.
Q: What are the dimensions of the product?
A: The product dimensions are approximately 32 cm (Length) x 30 cm (Width) x 8 cm (Height).
Q: Is it possible to get the device with a 240-volt European socket?
A: The included power adapter is rated for 100-240V AC input, meaning it is compatible with various international voltages. However, the physical plug type may be US standard. Users in regions with different plug types may need a simple plug adapter.

12. Warranty and Support

For warranty information, please refer to the specific terms and conditions provided by your retailer or the manufacturer at the time of purchase. If you encounter any issues or require technical assistance, please contact the seller or manufacturer's customer support with your product model (Z-6) and purchase details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.