TKLBLS Z8

Contents

TKL Z-8 Professional 8-Channel Mixing Console User Manual

Model: Z8 | Brand: TKLBLS

1. Introduction

Thank you for choosing the TKL Z-8 Professional 8-Channel Mixing Console. This versatile audio mixer is designed for a wide range of applications, from live performances and studio recording to home entertainment and broadcasting. Featuring 8 input channels, a built-in 99 DSP effects processor, Bluetooth wireless streaming, and a USB audio interface, the Z-8 offers comprehensive control over your audio. This manual provides essential information for safe operation, setup, and maintenance of your mixing console.

TKL Z-8 Professional 8-Channel Mixing Console front view
Figure 1: TKL Z-8 Professional 8-Channel Mixing Console

2. Important Safety Instructions

Please read and understand all safety instructions before operating the device. Keep this manual for future reference.

  • Power Source: Only use the provided power adapter. Ensure the voltage matches the requirements specified on the device.
  • Water and Moisture: Do not expose this appliance to rain or moisture. Do not use it near water or in damp environments.
  • Ventilation: Ensure proper ventilation. Do not block any ventilation openings.
  • Heat: Do not place the unit near heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
  • Cleaning: Clean only with a dry cloth.
  • Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
  • Cables: Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the appliance.

3. Package Contents

Please check that all items are present and in good condition:

  • TKL Z-8 Mixing Console
  • Power Adapter (Inbox adaptor: Yes)
  • User Manual (this document)

4. Product Overview

Familiarize yourself with the various controls and connections on your TKL Z-8 mixing console.

Diagram of TKL Z-8 Mixer with labeled controls and interfaces
Figure 2: TKL Z-8 Mixer Labeled Controls and Interfaces

Key Controls and Interfaces:

  • Microphone Input (MIC/LINE): XLR and 1/4" TRS combo jacks for connecting microphones or line-level instruments.
  • Power Amplification: Controls for input gain.
  • Gain Knob: Adjusts the input sensitivity for each channel.
  • Treble Knob (HIGH): Adjusts high frequencies (tweeter adjustment).
  • Tenor Knob (MID): Adjusts mid-range frequencies.
  • Bass Knob (LOW): Adjusts low frequencies (bass adjustment).
  • AUX Knob: Controls the auxiliary send level for external effects or monitoring.
  • Effect Knob (FX): Controls the send level to the internal DSP effects processor.
  • Mirror Knob (PAN): Adjusts the stereo panning for each channel.
  • Volume Fader (LEVEL): Controls the output level for each channel.
  • USB Interface: For connecting to a computer or mobile device.
  • Auxiliary Output (FX SEND, AUX SEND): Outputs for sending signals to external effects or monitoring systems.
  • 48V Phantom Switch: Activates +48V phantom power for condenser microphones.
  • Effect Knob (PROGRAM, PARAMETER): Selects and adjusts the internal DSP effects.
  • Volume Fader (MASTER STEREO): Controls the overall main output volume.
  • Power Switch: Turns the unit on/off.
  • Power Interface: Connects the DC power adapter.
  • Level Display: LED meters to monitor output levels.
  • Comfort Fader: Smooth faders for precise level control.

5. Setup Guide

5.1 Power Connection

  1. Ensure the mixer's power switch is in the OFF position.
  2. Connect the provided DC power adapter to the Power Interface on the rear of the mixer.
  3. Plug the power adapter into a suitable electrical outlet.
  4. Turn the Power Switch to the ON position. The power indicator should light up.

5.2 Audio Input Connections

The TKL Z-8 supports various audio input sources:

Diagram showing various equipment connected to the mixer
Figure 3: Applicable Equipment Connection Diagram
  • Microphones: Connect dynamic or condenser microphones to the MIC/LINE combo jacks using XLR cables. For condenser microphones, activate the 48V Phantom Switch (see Section 6.3).
  • Line-Level Devices: Connect instruments (keyboards, guitars with preamps), media players, or other audio devices to the MIC/LINE combo jacks using 1/4" TRS cables.

5.3 Audio Output Connections

  • Main Output (STEREO OUT): Connect the main stereo output to your power amplifier, powered speakers, or recording interface using 1/4" TRS cables.
  • Headphones (PHONES): Connect your headphones to the PHONES jack for monitoring.
  • Auxiliary Sends (FX SEND, AUX SEND): Use these outputs to send signals to external effects processors or stage monitors.

5.4 USB and Bluetooth Connectivity

Diagram showing USB input and Bluetooth connection to a phone
Figure 4: Bluetooth and USB Connectivity
  • USB Connection (to PC): Connect the mixer to your computer using a USB cable. The mixer will function as an audio interface for recording or playback.
  • USB Connection (to Mobile): For live broadcasting or recording with a mobile phone, connect the mixer via an OTG/USB cable.
  • Computer wired connection for live or recording
    Figure 5: Computer Wired Connection
  • Bluetooth Streaming:
    1. Press the 'MODE' button on the Digital Audio Player section until 'BLUE' is displayed.
    2. On your mobile device, search for Bluetooth devices and select 'TKL Z-8' (or similar name).
    3. Once paired, you can stream audio wirelessly from your device to the mixer.

6. Operation

6.1 Basic Mixing

  • Gain: Adjust the GAIN knob for each input channel to achieve an optimal signal level without clipping (distortion). The PEAK LED should only flash occasionally.
  • Equalization (EQ): Use the HIGH, MID, and LOW knobs to shape the tone of each channel.
  • Pan: The PAN knob adjusts the stereo position of the channel's signal.
  • Channel Level: Use the individual channel LEVEL faders to set the volume balance between inputs.
  • Master Level: The MASTER STEREO fader controls the overall output volume of the mix.

6.2 DSP Effects

The TKL Z-8 features 99 professional digital signal processing (DSP) effects.

99DSP effects list and selection guide
Figure 6: 99DSP Effects List and Selection
  1. Select Effect: Rotate the PROGRAM knob (labeled '99') to cycle through the 99 available effects (00-99). The display will show the effect number.
  2. Confirm Effect: Press the PROGRAM knob to confirm your selection.
  3. Adjust Parameter: Use the PARAMETER knob to adjust specific settings of the selected effect (e.g., delay time, reverb decay).
  4. Apply to Channel: Use the FX knob on each input channel to send a portion of that channel's signal to the DSP effects processor.

DSP Effect Categories:

  • 00-39: Reverb
  • 40-49: Delay
  • 50-59: Pingpong Delay
  • 60-69: Flanger
  • 70-79: Key Echo
  • 80-84: Chorus + Echo
  • 85-89: Auto Wah + Echo
  • 90-93: Voice Changer
  • 94-96: Tremolo
  • 97-99: Rotary Speaker

6.3 48V Phantom Power

Close-up of 48V Phantom Power switch and EQ knobs
Figure 7: 48V Phantom Power Switch

The 48V PHANTOM switch provides +48V power to condenser microphones. Ensure this switch is OFF before connecting or disconnecting microphones to prevent damage. Only activate it when a condenser microphone requiring phantom power is connected.

6.4 Low Cut Button

Frequency response graph showing attenuation below 80Hz
Figure 8: Low Cut Filter Effect

Each input channel is equipped with an 80Hz LOW CUT button. Activating this button attenuates frequencies below 80Hz, which helps to reduce unwanted low-frequency rumble, vibration, and wind noise from microphones, resulting in a cleaner sound.

6.5 USB Audio Interface Functionality

When connected to a computer via USB, the TKL Z-8 acts as an external sound card. This allows for:

  • Recording: Capture the mixer's stereo output directly into your digital audio workstation (DAW).
  • Playback: Play audio from your computer through the mixer's main output.
  • Live Broadcasting: Use the mixer for high-quality audio input during live streams from your PC or mobile device.

7. Specifications

Table of detailed technical specifications for the TKL Z-8 mixer
Figure 9: Detailed Technical Specifications
TKL Z-8 Mixing Console Specifications
Feature Specification
Dimensions (W x D x H) 24cm x 26cm x 5.5cm
Net Weight 1.3kg
Power Source DC
Inbox Adaptor Yes
Built-in Battery No
Plug Type US Plug (Region-specific adapter may be included)
Type Mixers
Origin Mainland China
Certification CE
TRIM Range 0dB to +10dB
Line Input Electronically balanced
Bandwidth 10 Hz to 60kHz ±3dB
Distortion (THD & N) 0.01% at 4 dBu, 1kHz, Bandwidth 80 kHz
Line Level Range +10dBu to -40dBu
Hi Shelving EQ 10kHz +/-15dB
Mid Range EQ 2.5kHz+/-15dB
Lo Shelving EQ 80Hz+/-15dB
Max Output (Master Mix) +22 dBu balanced
Control Room Out +22 dBu unbalanced
Signal-To-Noise Ratio 112dB, all channels at Unity Gain
Mains Voltages (USA/Canada) ~120V AC, 60 Hz
Mains Voltages (U.K./Australia) ~240V AC, 50 Hz
Mains Voltages (China) ~220V AC, 50 Hz

8. Troubleshooting

If you encounter issues with your mixer, refer to the following common problems and solutions:

Problem Possible Cause Solution
No sound output
  • Power not connected or turned on.
  • Master volume fader too low.
  • Individual channel fader too low.
  • Incorrect input/output connections.
  • External amplifier/speakers off or muted.
  • Check power connection and switch.
  • Increase MASTER STEREO fader.
  • Increase relevant channel LEVEL fader.
  • Verify all audio cables are correctly connected.
  • Check external audio equipment.
Distorted sound
  • Input GAIN too high.
  • Channel or Master LEVEL too high.
  • Damaged cables.
  • Reduce GAIN until PEAK LED flashes only occasionally.
  • Lower channel or MASTER STEREO faders.
  • Try different cables.
Hum or noise
  • Ground loop.
  • Poor cable shielding.
  • Interference from other electronic devices.
  • Ensure all equipment is on the same power circuit.
  • Use high-quality, shielded cables.
  • Move mixer away from power supplies, computers, or other noisy electronics.
  • Engage the LOW CUT button on affected channels.
Bluetooth not connecting
  • Mixer not in Bluetooth mode.
  • Device too far from mixer.
  • Interference.
  • Ensure 'BLUE' is displayed on the Digital Audio Player.
  • Move device closer to the mixer.
  • Turn off other Bluetooth devices nearby.

9. Maintenance

9.1 Cleaning

  • Always disconnect the power adapter before cleaning.
  • Use a soft, dry cloth to wipe the exterior of the mixer.
  • Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.
  • For stubborn dirt, a slightly damp cloth followed by a dry cloth can be used, ensuring no moisture enters the unit.

9.2 Storage

  • When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Protect the unit from dust by covering it or storing it in its original packaging.

10. User Tips

  • Power Voltage: The TKL Z-8 mixer uses a DC power source. The specific AC mains voltage required for the power adapter varies by region (e.g., ~120V AC for USA/Canada, ~240V AC for UK/Australia, ~220V AC for China). Always use the power adapter supplied with your unit and ensure it matches your local power supply. Refer to the 'Specifications' section for detailed mains voltage information.
  • Microphone Placement: Experiment with microphone placement and the LOW CUT button to minimize unwanted background noise and achieve clearer vocals or instrument sounds.
  • Effect Blending: Don't overuse DSP effects. Start with subtle amounts and gradually increase to find the desired blend without making the sound muddy or artificial.
  • Cable Management: Keep your cables organized and untangled to prevent signal interference and accidental disconnections.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2024 TKLBLS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.