K&F CONCEPT KF-25 Ballhead

Contents

K&F CONCEPT KF-25 Ballhead Tripod Mount Adapter User Manual

Model: KF-25 Ballhead

1. Introduction

This manual provides essential information for the safe and effective use of your K&F CONCEPT KF-25 Ballhead Tripod Mount Adapter. Please read these instructions carefully before use and retain them for future reference. The KF-25 Ballhead is designed to provide stable and flexible camera positioning for various photography needs, featuring a 25mm large ball head, quick release plate, and robust aluminum alloy construction.

K&F CONCEPT KF-25 Ballhead Tripod Mount Adapter
Figure 1: K&F CONCEPT KF-25 Ballhead Tripod Mount Adapter

2. Safety & Warnings

Failure to follow these instructions may result in damage to the product or personal injury. This manual is mainly for precautionary statements. For specific product usage instructions, refer to the manual included in the package or the product details page. If you have any questions, please contact customer service.

  • Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Product Overview & Components

The KF-25 Ballhead is constructed from durable aluminum alloy and features several key components for versatile camera positioning.

Labeled components of KF-25 Ballhead
Figure 2: Key Components of the KF-25 Ballhead

Package Contents:

  • 1 x KF-25 Ballhead
  • 1 x 1/4 inch to 3/8 inch Convertible Screw Adapter (for tripod mounting)

Component Identification:

  • Bubble Level: For precise horizontal alignment.
  • Locking Knob: Secures the ballhead's position.
  • Anti-slip Rubber Pad: Provides secure grip for the camera on the quick release plate.
  • 1/4 inch Screw: For attaching cameras, DVs, or camcorders to the quick release plate.
  • Safety Bolt: Prevents accidental release of the quick release plate.
  • Screw Handle: Used to tighten or loosen the quick release plate.
  • Disc-shaped Base: Features a precise scale for 360° panoramic rotation.

4. Specifications

FeatureSpecification
MaterialAluminum alloy (All aluminum magnesium alloy with forged technology)
Max. Load Capacity8 kg (18 lbs)
Camera Screw Mount1/4 inch
Tripod Screw Hole3/8 inch (with 1/4 inch to 3/8 inch convertible screw adapter)
Ball Sphere Diameter25 mm (1 inch)
Base Diameter36 mm
Height80 mm (3.1 inches)
Length82 mm (3.2 inches)
Width59 mm (2.3 inches)
Weight0.205 kg (0.45 lbs)
Tilt Angle+90° to -55°
KF-25 Ballhead dimensions and specifications
Figure 3: KF-25 Ballhead Dimensions and Load Capacity

5. Setup

5.1 Attaching the Ballhead to a Tripod/Monopod

  1. Identify the mounting screw on your tripod or monopod. The KF-25 Ballhead has a 3/8 inch screw hole at its base.
  2. If your tripod has a 1/4 inch screw, use the provided 1/4 inch to 3/8 inch convertible screw adapter. Screw the adapter into the tripod's 1/4 inch screw, then attach the ballhead.
  3. Align the ballhead's 3/8 inch screw hole with the tripod's mounting screw (or adapter).
  4. Rotate the ballhead clockwise until it is securely fastened to the tripod. Ensure it is tight to prevent wobbling.
Attaching ballhead to tripod and camera to quick release plate
Figure 4: Ballhead Mounting Options (Tripod and Camera)

5.2 Attaching Your Camera to the Quick Release Plate

  1. Locate the quick release plate on top of the ballhead.
  2. Ensure the quick release plate is detached from the ballhead by loosening the screw handle and pressing the safety bolt if necessary.
  3. Align the 1/4 inch screw on the quick release plate with the tripod mount hole on the bottom of your camera (DSLR, DV, camcorder).
  4. Rotate the screw handle to securely fasten your camera to the quick release plate. Ensure the anti-slip rubber pads are properly seated against your camera's base.
  5. Once the camera is attached to the quick release plate, slide the plate back into the ballhead's clamp. Ensure it clicks into place and then tighten the screw handle firmly to lock it.

6. Operating Instructions

6.1 Adjusting Ballhead Position

  1. Loosen the Locking Knob: To adjust the angle of your camera, gently loosen the main locking knob on the side of the ballhead.
  2. Position Your Camera: Tilt, pan, or rotate your camera to the desired angle. The ballhead allows for a wide range of motion, including tilting from +90° to -55°.
  3. Utilize U-shaped Groove: For quick switching between horizontal and vertical shooting, use the U-shaped groove on the side of the ballhead. Tilt the camera into this groove for vertical orientation.
  4. Tighten the Locking Knob: Once the desired position is achieved, firmly tighten the locking knob to secure the camera in place. This ensures precise and stable positioning without shifting.
Ballhead tilt angles and tripod adapter
Figure 5: Ballhead Tilt Angles and Tripod Adapter
Camera mounted on ballhead, demonstrating secure lock
Figure 6: Secure Locking Mechanism for Stable Shots

6.2 Panoramic Photography

  1. Unlock Base Rotation: The disc-shaped base of the ballhead can rotate 360°. Loosen the dedicated side knob (if present, separate from the main locking knob) that controls the base rotation.
  2. Rotate for Panorama: Use the precise scale markings on the base to achieve accurate rotational increments for panoramic shots.
  3. Lock Base Rotation: Once your panoramic sequence is complete or you need to fix the base position, tighten the side knob firmly.
360 degree panoramic shooting with ballhead
Figure 7: 360° Panoramic Shooting Capability

6.3 Using the Bubble Level

The integrated bubble level helps ensure your camera is perfectly horizontal. Adjust the ballhead until the bubble is centered within the level indicator for a balanced shot.

7. Maintenance

  • Cleaning: Wipe the ballhead with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
  • Avoid Moisture: Do not expose the ballhead to water or excessive moisture, as this can damage internal mechanisms and affect performance.
  • Storage: Store the ballhead in a dry, clean environment when not in use.
  • Inspection: Periodically check all screws and knobs to ensure they are tight. Do not use the product if any part appears damaged or loose.

8. Troubleshooting

If you encounter any issues with your KF-25 Ballhead, please consider the following:

  • Camera not stable: Ensure the quick release plate is securely attached to the camera and then firmly locked into the ballhead clamp. Check that the main locking knob is fully tightened.
  • Ballhead movement is stiff: Check for any debris or foreign objects obstructing the ball mechanism. Ensure no knobs are overtightened.
  • Ballhead is loose/wobbly: Verify that the ballhead is securely mounted to the tripod/monopod and that all locking mechanisms are engaged.

For further assistance, please contact customer support.

9. User Tips

  • Always double-check all locking knobs before leaving your camera unattended on the tripod.
  • When attaching heavy lenses, ensure the camera and lens are balanced on the quick release plate to prevent strain on the ballhead.
  • For macro photography or precise adjustments, make small, controlled movements and tighten the locking knob gradually.
  • Consider carrying a spare 1/4 inch to 3/8 inch adapter if you frequently switch between different tripods.

10. Warranty & Support

The K&F CONCEPT KF-25 Ballhead comes with a 12-month Manufacturer's limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must provide your order number and details of the defect. Items with an expired warranty will not be repaired or replaced.

For any questions or support, please contact the store customer service staff.

A detailed user manual in PDF format is available for download: User Manual (PDF)

11. Manufacturer Information

Manufacturer:

Feiruilande Shenzhen Shangmao Co., Ltd.

Address: CN-3B01-50, Building A1, 1983 Creative Town, No. 29, Nanxin Street, Nanling Village, Nanwan Street, Longgang District, Shenzhen

Tel: 86-13927483703

EU Authorized Representative:

SOLID AUTHORITY LIMITED

Address: 51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.