Instruction Manual

1. Introduction

Thank you for choosing the Lockable Roof Rail Rack Cross Bars. This product is designed to provide additional cargo capacity for your KIA Sonet 2020-2024, allowing you to safely transport various items such as kayaks, canoes, luggage, snowboards, skis, bikes, and fishing poles. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

• Always ensure the cross bars are securely fastened to the vehicle's raised roof side rails before loading any cargo.
• Do not exceed the maximum load capacity of 220 lbs (100 kg).
• Distribute cargo evenly across the cross bars to maintain vehicle stability.
• Check the security of the cross bars and cargo frequently, especially during long trips or after driving on rough terrain.
• Be aware of the increased height and width of your vehicle when the cross bars and cargo are installed, particularly when entering garages, car washes, or low-clearance areas.
• Use appropriate tie-downs and restraints to secure cargo to prevent shifting or detachment during transit.
• Always lock the cross bars to prevent theft and ensure they remain securely attached.

3. Package Contents

Your package should contain the following items:

• 2 x Aluminum Cross Bars
• Necessary Installation Accessories (including keys and an Allen wrench)

4. Specifications

5. Setup and Installation

The cross bars are designed for easy assembly and removal without the need for drilling or cutting. Installation can typically be completed in minutes.

1. Identify Front and Rear Bars: While both bars are similar, ensure they are oriented correctly for your vehicle's roof rails.
2. Adjust Grips: The cross bars feature adjustable grips designed to fit your vehicle's raised roof side rails. Loosen the adjustment screws (typically found on the underside of the end caps, accessible with the provided Allen wrench) to allow the grips to expand.
3. Position Bars: Place the first cross bar onto the front section of your vehicle's raised roof rails. Ensure the end caps sit flush and securely on the rails.
4. Secure First Bar: Tighten the adjustment screws evenly on both sides of the cross bar until it is firmly clamped onto the roof rails. Do not overtighten.
5. Repeat for Second Bar: Position the second cross bar on the rear section of the roof rails, ensuring it is parallel to the first bar and evenly spaced. Secure it in the same manner.
6. Lock the Bars: Insert the provided keys into the lock cylinders on each end cap and turn to lock the cross bars in place. This provides an anti-theft function and ensures the bars remain secure. Remove the keys and store them safely.
7. Final Check: Gently pull and push on each cross bar to confirm they are securely attached and do not move.

6. Operating Instructions

Once installed, your roof rack cross bars are ready for use. They are designed to carry various types of cargo, expanding your vehicle's utility for travel and recreation.

• Loading Cargo: Place your cargo (e.g., roof boxes, bike racks, kayaks) onto the cross bars. Ensure the weight is distributed as evenly as possible.
• Securing Cargo: Always use appropriate straps, ropes, or other securing devices to firmly attach your cargo to the cross bars. Ensure there is no movement or play in the cargo.
• Locking Mechanism: The integrated lock and key system provides an anti-theft feature for the cross bars themselves. Always lock the bars after installation and when leaving your vehicle unattended.
• Driving with Cargo: Drive cautiously, especially at higher speeds, in strong winds, or when cornering. The added weight and wind resistance can affect your vehicle's handling and fuel efficiency.
• Removing Cargo: Unload cargo carefully, ensuring you do not damage your vehicle's paintwork or the cross bars.

7. Maintenance

Regular maintenance will ensure the longevity and safe operation of your roof rack cross bars.

• Cleaning: Clean the cross bars regularly with mild soap and water to remove dirt, road grime, and salt. Avoid abrasive cleaners or solvents that could damage the finish.
• Inspection: Periodically inspect all components for signs of wear, damage, or corrosion. Check that all screws and fasteners are tight. Replace any damaged parts immediately.
• Lubrication: If the locking mechanism becomes stiff, apply a small amount of graphite lubricant to the keyhole.
• Storage: If you remove the cross bars for extended periods, store them in a dry place away from direct sunlight to prevent material degradation.

8. Troubleshooting

• Cross bars feel loose after installation: Re-check all adjustment screws and ensure they are tightened evenly and firmly. Ensure the grips are correctly seated on the vehicle's raised roof rails.
• Increased wind noise: While the streamline design reduces noise, some increase is normal. Ensure cargo is securely fastened and not creating additional drag. Check that the cross bars are installed correctly and not twisted.
• Keys not turning in lock: Ensure the key is fully inserted and try wiggling it gently. If stiff, apply a small amount of graphite lubricant to the keyhole. Do not force the key.

9. User Tips

• For optimal fuel efficiency, remove the cross bars when not in use, especially for long journeys.
• Always double-check the maximum weight capacity of your vehicle's roof rails, as it may be lower than the cross bars' capacity.
• Consider using a cargo net or additional straps for irregularly shaped items to ensure maximum security.

10. Warranty and Support

This product comes with a 1-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship.

For warranty claims, technical support, or any questions regarding the product, please contact your retailer or the seller directly. Please have your purchase receipt and product model information available when contacting support.