GKFLY GG-JS-T02, GG-JS-08

Contents

GKFLY Car Battery Jump Starter User Manual

Models: GG-JS-T02, GG-JS-08

1. Introduction

Thank you for choosing the GKFLY Car Battery Jump Starter. This portable device is designed to provide emergency jump-starting for your vehicle, act as a power bank for electronic devices, and offer emergency lighting. Please read this manual carefully before use to ensure safe and optimal operation.

GKFLY 2000A Jump Starter with clamps
GKFLY 2000A Jump Starter with clamps. This image shows the compact jump starter unit alongside its red and black battery clamps.

2. Safety Protection Technology

Your GKFLY Jump Starter is equipped with advanced security protection technology to ensure safe operation:

  • Temperature Protection
  • Short Circuit Protection
  • Voltage Protection
  • Overcharge Protection
  • Current Protection
  • Reverse Connection Protection
  • Lithium Polymer Battery Protection
  • Magnetic Protection
  • Constant Current Protection
Diagram illustrating multiple security protection technologies
Diagram illustrating multiple security protection technologies including temperature, short circuit, voltage, overcharge, current, reverse connection, lithium polymer battery, magnetic, and constant current protection.

3. Package Contents

Please check the box for the following items:

  • Jump Starter Host (1 unit)
  • Protective Clamps (Red for positive, Black for negative) (1 set)
Decorative banner indicating 'Package list:'
Decorative banner indicating 'Package list:'.

4. Specifications

GKFLY Jump Starter Specifications
FeatureModel GG-JS-T02Model GG-JS-08
Capacity44.4Wh (5000-8000 mAh equivalent)Not specified (5000-8000 mAh equivalent)
Type-C Input5V/2AN/A
InputN/A12V/15V-1A
USB Output5V/2A5V-2A
EC5 Output12~16VN/A
Car Boot Voltage12V12V
Boot CurrentN/A400A
Starting Peak Current2000A (3 seconds)800A
Engine CompatibilityPetrol Cars 4.0L or Below, Diesel Cars 3.0L or BelowMost 12V Gas and Diesel Engines
Working Temperature-20℃~60℃-20℃~65℃
Net WeightApprox. 260gApprox. 280g
Dimension (L*W*H)140*78*23mm131*75*25mm
LED ModeLighting/SOS/StrobeLighting/SOS/Strobe
Cycle Boot LifeN/AMore than 3000 times
Full Charging TimeN/A4-5 hours
CertificationsCE, FCC, MSDS, RoHS

Note: The charging and discharging speed of the last 15% of the product's battery may be faster. This is a characteristic of high-rate lithium batteries and does not affect the product's quality or normal operation.

Close-up view of the red GKFLY jump starter (Model GG-JS-T02A)
Close-up view of the red GKFLY jump starter (Model GG-JS-T02A) with its textured surface.
Close-up view of the white GKFLY jump starter (Model GG-JS-08)
Close-up view of the white GKFLY jump starter (Model GG-JS-08) with its textured surface.

5. Setup and Initial Charge

Before first use, ensure your jump starter is fully charged. Connect the appropriate charging cable (Type-C for GG-JS-T02 or 12V/15V-1A input for GG-JS-08) to the device and a power source. The LED indicators will show the charging status. A full charge typically takes 4-5 hours for Model GG-JS-08.

Image showing the jump starter charging a smartphone, with text 'Charge Your Device Anytime' and '5V 2A'.
The jump starter can charge your devices anytime via its 5V 2A USB output.

6. Operating Instructions

6.1. Jump Starting a Vehicle

Follow these steps to jump start your car:

  1. Connect the Clamps: Connect the red clamp to the positive (+) terminal of your car battery and the black clamp to the negative (-) terminal.
  2. Insert into Jump Starter: Insert the blue end of the smart battery clamps cable into the EC5 output port (DO port) of the jump starter.
  3. Start the Car: Once connected, start your car's engine.
  4. Remove Clamps: After the car starts, immediately remove the clamps from the jump starter, then from the car battery.
Decorative banner indicating 'Instructions'
Decorative banner indicating 'Instructions'.
Four-step visual guide for jump starting a car
Four-step visual guide for jump starting a car: 1. Connect clips to engine battery, 2. Insert clips into jump starter, 3. Start the car, 4. Remove clips.
Demonstration of the GKFLY Car Jump Starter in use, showing unboxing, connecting to a car battery, starting the engine, and disconnecting.

6.2. Using as a Power Bank

Connect your electronic devices (mobile phones, tablets, gaming systems, digital cameras, etc.) to the USB output port (5V/2A) of the jump starter using their respective charging cables. The jump starter will automatically begin charging your device.

The jump starter functioning as a power bank via its USB output, charging various digital devices.
The jump starter functions as a power bank via its USB output, charging various digital devices.

6.3. Using the Emergency Light

The jump starter features a built-in LED light with multiple modes:

  • Always On Mode: For general illumination.
  • Strobe Mode: For signaling or attracting attention.
  • SOS Mode: Emits the international SOS distress signal.

Refer to the device's buttons for activating and cycling through the light modes.

The jump starter's LED/SOS emergency light with Always On, Strobe, and SOS modes.
The jump starter's LED/SOS emergency light with Always On, Strobe, and SOS modes.

7. Maintenance

  • Charging: Recharge the jump starter at least once every three months to maintain battery health, even if not in use.
  • Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Cleaning: Use a soft, dry cloth to clean the exterior. Do not use harsh chemicals or abrasive materials.
  • Temperature Resistance: The device is designed to work in extreme temperatures (-20℃ to 60℃/65℃ depending on model), but prolonged exposure to extreme conditions should be avoided during storage.
Image showing the jump starter in a snowy environment, emphasizing its explosion-proof and high-temperature resistance (-20°C ~ 60°C).
The jump starter is designed for explosion-proof and high-temperature resistance, operating between -20°C and 60°C.

8. Troubleshooting

  • Device not turning on: Ensure the device is charged. If not, connect it to a power source and charge fully.
  • Car not starting: Check that the clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge.
  • Clamps sparking: This can happen if the clamps are not connected correctly or if there is a short circuit. Disconnect immediately and re-check connections.
  • Slow charging of external devices: Ensure the charging cable is functioning correctly and that the device is properly connected to the USB output.

9. User Tips

  • Start-Stop Batteries: The GKFLY Jump Starter is compatible with most 12V car batteries, including those in vehicles equipped with start-stop technology. Ensure proper connection to the battery terminals as per the instructions.
  • Cold Weather Performance: The jump starter is designed to operate effectively in cold conditions down to -20°C. For best performance in extreme cold, keep the unit in a warmer environment (e.g., inside the car cabin) until ready for use.
  • Regular Checks: Periodically check the charge level of your jump starter, especially before long trips, to ensure it's ready for emergency use.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official GKFLY website. Keep your purchase receipt as proof of purchase.

© 2024 GKFLY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.