Yieryi YY-1088G

Contents

Yieryi Digital Soil Moisture Tester Kit User Manual

Model: YY-1088G | Brand: Yieryi

1. Introduction

The Yieryi Digital Soil Moisture Tester Kit (Model: YY-1088G) is a versatile 6-in-1 device designed to provide comprehensive insights into your soil's health. It accurately measures soil pH, electrical conductivity (EC), moisture content, fertility, ambient light level, and temperature. This manual will guide you through the setup, operation, and maintenance of your soil tester to ensure optimal performance and longevity.

2. Safety Information

  • Keep the device out of reach of children.
  • Do not immerse the main display unit in water or other liquids. The probe is designed for soil insertion, but the electronic components are not waterproof.
  • Handle the probe with care to avoid bending or damaging it.
  • Do not use the device in extreme temperatures or corrosive environments.
  • Ensure the battery compartment is securely closed to prevent moisture ingress.
  • Remove batteries if the device will not be used for an extended period.

3. Package Contents

Please check the package for the following items:

  • 1 x Yieryi Digital Soil Tester (YY-1088G)
  • 1 x Instruction Manual
  • 1 x EC Calibration Liquid
  • 3 x PH Calibration Powders (for pH 4.00, 7.00, 10.01)
  • 1 x Cleaning Cloth
Contents of the Yieryi Digital Soil Moisture Tester Kit package, including the tester, manual, calibration liquids, and cleaning cloth.
Figure 1: Package Contents

4. Product Overview

Familiarize yourself with the components of your Yieryi Soil Tester:

Diagram of the Yieryi Soil Tester showing its light-sensitive element, LCD display, power button, data hold/temperature conversion button, calibration button, and electrode. Dimensions are also shown: 295mm total length, 200mm probe length, 64mm display width.
Figure 2: Device Components and Dimensions
  • Light-sensitive element: Detects ambient light levels.
  • LCD Display: Shows all measurement readings and battery status.
  • Power button: Turns the device ON/OFF.
  • HOLD/TEMP button: Short press to lock data (H), long press to convert temperature units (°C/°F).
  • CAL button: Used for calibration.
  • Electrode: The 13mm thick, highly sensitive probe for soil insertion.
  • Battery Compartment: Located at the back, holds 4 x AAA batteries.
The Yieryi Soil Tester's LCD display can be rotated 45 degrees for convenient viewing from different angles.
Figure 3: Rotatable LCD Display
Close-up of the Yieryi Soil Tester showing the battery compartment with 4 AAA batteries installed and the durable, 13mm thick electrode probe.
Figure 4: Battery Compartment and Electrode

5. Specifications

Measurement ItemRangeResolutionAccuracy
pH0.00~14.00pH0.01pH±0.1pH
EC0.01-10.00mS/cm0.01mS/cm±2%F.S
Temperature0.0°C-80.0°C (32.0°F-176.0°F)0.1°C / 0.1°F±0.5°C
Fertility0~99%1%±2%F.S
Sunlight3 grid (weak), 6 grid (moderate), 9 grid (strong)N/AN/A
Moisture0~3 grid (dry), 4~5 grid (moderate), 6~7 grid (moist), 8~10 grid (too humid)N/AN/A

Other Specifications:

  • Display Type: Digital LCD with Backlight
  • Battery: 4 * 1.5V AAA (Battery Included: Yes)
  • Automatic Shut-off: 5 minutes of no operation
  • Work Environment: 0-80°C (32.0-176°F); RH100%
  • Dimensions: 278mm (Length) * 65mm (Width) * 30mm (Thickness)
  • Electrode Thickness: 13mm
  • Certification: CE, RoHS

6. Setup

6.1. Battery Installation

  1. Locate the battery compartment cover on the back of the device.
  2. Slide or unclip the cover to open it.
  3. Insert 4 x AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

For accurate readings, especially for pH and EC, it is recommended to calibrate the device before first use and periodically thereafter.

pH Calibration:

  1. Prepare the pH buffer solutions using the provided powders (pH 4.00, pH 7.00, pH 10.01) and distilled water according to their instructions.
  2. Turn on the soil tester.
  3. Insert the probe into the pH 7.00 buffer solution.
  4. Press and hold the 'CAL' button until the display indicates calibration mode. Follow the on-screen prompts to complete the calibration for pH 7.00.
  5. Rinse the probe with distilled water and dry it.
  6. Repeat the process for pH 4.00 and pH 10.01 solutions. Prioritize calibrating with pH 7.00 first.

EC Calibration:

  1. Prepare the 1413 µS/cm EC calibration solution.
  2. Turn on the soil tester.
  3. Insert the probe into the EC calibration solution.
  4. Press and hold the 'CAL' button until the display indicates calibration mode. Follow the on-screen prompts to complete the calibration for EC.
  5. Rinse the probe with distilled water and dry it.
Video 1: pH Calibration Guide

This video demonstrates the pH calibration process using buffer solutions.

7. Operating Instructions

The Yieryi Soil Tester is designed for ease of use in various planting environments, including gardens, orchards, potted plants, seedlings, greenhouses, and agricultural settings.

A collage of six images showing various applications for the soil tester: Garden, Orchard, Potted plants, Seedling, Greenhouse planting, and Agricultural planting.
Figure 5: Wide Range of Applications

7.1. General Usage

  1. Power On: Press the power button to turn on the device.
  2. Insert Probe: Gently insert the probe into the soil to the desired depth (ensure the entire electrode is covered). For best results, moisten dry soil slightly before testing.
  3. Wait for Reading: Allow a few seconds (typically 5 seconds) for the readings to stabilize on the LCD.
  4. Data Lock (HOLD): Short press the 'HOLD/TEMP' button to lock the current readings on the display. Press again to unlock.
  5. Temperature Unit Conversion: Long press the 'HOLD/TEMP' button to switch between Celsius (°C) and Fahrenheit (°F).
  6. Power Off: Press the power button to turn off the device. The device will automatically shut off after 5 minutes of inactivity.
Video 2: Product Demonstration (Usage, Data Lock, Temperature Conversion, Screen Rotation)

This video demonstrates the basic operation, including inserting the probe, reading data, using the data lock, converting temperature units, and rotating the screen.

7.2. Specific Measurements

The device displays all 6 parameters simultaneously on the LCD screen.

Soil Moisture:

  • The display shows 'MOIST' with a bar graph and a numerical percentage (0-10 drops).
  • Interpretation:
    0-3 drops: Dry
    4-5 drops: Moderate
    6-7 drops: Moist
    8-10 drops: Too Humid
The Yieryi Soil Tester measuring soil moisture, with a guide indicating 2-3 drops as Dry, 4-5 as Medium, 6-7 as Wet, and 8-10 as Too Wet.
Figure 6: Soil Moisture Measurement and Guide

Soil pH:

  • The display shows 'pH' with a numerical value (0.00-14.00pH).
  • Interpretation: Soil pH significantly impacts nutrient availability and plant growth. Refer to the pH reference chart for acidity/alkalinity levels.
The Yieryi Soil Tester measuring soil pH, with a pH reference scale from 1 (Acidity) to 14 (Alkaline), and 7 as Neutral.
Figure 7: Soil pH Measurement and Reference

Soil Fertility:

  • The display shows 'Fertility' with a numerical percentage (0-99%).
  • Interpretation: Soil fertility is crucial for providing essential nutrients. Monitor to ensure proper nutrient levels for crop growth.

Ambient Light Level:

  • The display shows 'LIGHT' with a bar graph (9 cells).
  • Interpretation:
    3 cells: Insufficient light (may cause poor growth, hinder flowering)
    6 cells: Moderate (suitable for most crops)
    9 cells: Too much light (may cause yellow leaves, wilting)
The Yieryi Soil Tester displaying Ambient Light Level (3, 6, or 9 cells) and Soil Fertility (0-99%). It also shows examples of poorly controlled fertility vs. good fertility control.
Figure 8: Ambient Light and Soil Fertility Measurements

Soil EC (Electrical Conductivity):

  • The display shows 'EC' with a numerical value (0.01-10.00mS/cm).
  • Interpretation: EC indicates the concentration of soluble salts in the soil, which affects nutrient uptake. Different plants have different suitable EC levels.
The Yieryi Soil Tester measuring Soil EC, illustrating the difference between poor soil EC control (poor growth) and good soil EC control (double the growth).
Figure 9: Soil EC Measurement and Impact

Soil Temperature:

  • The display shows 'TEMP' with a numerical value in °C or °F.
  • Interpretation: Soil temperature affects root growth, nutrient absorption, and microbial activity.

8. Maintenance

  • Cleaning the Probe: After each use, gently wipe the probe with the provided cleaning cloth or a soft, damp cloth to remove any soil residue. Do not use abrasive materials or harsh chemicals.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep the probe clean and protected.
  • Battery Replacement: Replace batteries when the low battery indicator appears on the display.
  • Recalibration: Recalibrate pH and EC regularly (e.g., monthly or if readings seem inaccurate) to maintain precision.

9. Troubleshooting

  • No Display/Device Not Turning On:
    - Check if batteries are installed correctly.
    - Replace with new AAA batteries.
  • Inaccurate Readings:
    - Ensure the probe is clean and free of residue.
    - Recalibrate the pH and EC sensors as described in Section 6.2.
    - Ensure the soil is adequately moist for accurate moisture, pH, and EC readings. Dry soil can lead to unreliable results.
  • Slow Response:
    - Clean the probe thoroughly.
    - Ensure sufficient moisture in the soil.
  • Display is Dim:
    - Replace batteries.

10. User Tips

  • For consistent readings, always insert the probe to the same depth in the soil.
  • When testing dry soil, lightly water the area and wait 20-30 minutes before taking a reading to ensure sufficient moisture for the probe.
  • Clean the probe thoroughly after each use to prevent contamination and ensure accuracy for future tests.
  • Regularly check the battery level, especially before important measurements.
  • Utilize the data lock feature (short press HOLD/TEMP) to easily record readings.

11. Warranty and Support

For any questions, technical support, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.