BQCC F6021w 1 Din Car MP5 Player Instruction Manual

1. Setup

1.1 Before Installation

Thank you for purchasing and using our products. When you receive the product, please do not take it directly to the car for installation, as the product may be affected after a long journey. Please test the machine before installing it fully.

Test Method: Take the machine to the car battery and test it. This car stereo applies to a power supply voltage of 12V DC. Connect the red and yellow wires of the power cord together and connect them to the positive pole of the battery. Connect the black wire of the power cord to the negative pole of the battery. Wait for 10 seconds after connecting, then press each button on the machine to see if it boots normally. If it turns on, there is no problem, and you can proceed with installation. If the test machine does not start normally, please re-confirm that you have followed these steps strictly. If the problem persists, please contact support.

Important Note: When the yellow line (B+) and the red line (ACC) have a 12V positive power at the same time, the unit can be turned on normally. The yellow line (B+) keeps the power on and provides memory function. There are 8 speaker cables; each cable must not be grounded, shared, or touch other lines, otherwise, there will be no sound output, distorted sound, or machine overheating.

1.2 Installation Steps

1. Separate the iron frame from the host unit.
2. Insert the iron frame into the car radio installation window.
3. Fix the iron frame to the car with a screwdriver.
4. Press the main unit into the iron frame and let it snap into place.

1.3 ISO Plug Wiring Instructions

The B jack has two versions of the plug: B1 or B2. Refer to the diagram below for correct wiring connections.

1.4 RCA Plug Description

There are two versions of the RCA heat sink, whichever is actually received with your product.

1.5 Reversing Camera Installation Method

Refer to the diagrams below for connecting the reversing camera. Ensure the camera line is properly connected to the "CAMIN" car radio port.

1.6 Product Accessories

The following accessories are typically included with your BQCC F6021w car MP5 player:

• 1x Car Player Host Unit
• 1x GPS Antenna
• 2x High and Low Power Cables
• 1x USB Cable
• 1x Mounting Bracket
• 1x Screws
• 1x Manual
• 1x USB Charging Extension Cable
• 1x WiFi Antenna
• 1x AHD Camera (Optional)

2. Operating Instructions

2.1 Features Overview

The BQCC F6021w car MP5 player offers a wide range of features for an enhanced in-car experience:

• Radio: FM radio with RDS function for real-time traffic information.
• USB Playback: Read audio, video, and picture files from a USB flash drive.
• Bluetooth Function: Hands-free calls and BT music streaming.
• Rear View Function: Supports reversing camera input (camera optional).
• Video Input/Output: Connect external video sources and displays.
• Steering Wheel Control: Learn functions from your original car steering wheel buttons.
• TYPE-C Charging: Dedicated Type-C charging interface.
• External Microphone Input: Supports external microphone (optional).
• CARPLAY/Android AUTO: Wired/wireless connectivity for Apple CarPlay and Android Auto.
• Power Protection: Positive and negative pole reverse connection protection prevents circuit board damage from incorrect wiring.

2.2 Remote Control Introduction

The unit comes with a remote control for convenient operation. The style of the remote control may vary slightly based on the actual product received. Below are common button functions:

Remote Control 1 Functions:

• VOL+/-: Volume up/down.
• Previous/Next Track: Navigate through tracks.
• SEL/Enter: Select/Confirm.
• BND (FM1-FM2-FM3): Switch radio bands.
• MENU: Return to main interface.
• MODE: Switch mode.
• Answer/End Call: Handle phone calls.
• MUTE: Mute on/off.

Remote Control 2 Functions:

• MUSIC/MOVIE: Switch between music and video playback modes.
• BAND: Switch radio bands (FM1-FM2-FM3).
• Number Buttons (0-9): Direct input for radio stations or other functions.
• EQ: Sound effect settings (USER-CLASSIC-POP-ROCK-JAZZ-BEAT).
• VOL+/-: Volume up/down.
• Previous/Next Track: Navigate through tracks.
• RPT: Repeat playback.
• INT: Intro to music.
• MUTE: Mute on/off.

2.3 CarPlay and Android Auto

The unit supports both wired and wireless Apple CarPlay and Android Auto. This allows seamless integration with your smartphone for navigation, music, calls, and other apps directly on the car stereo's display.

2.4 RDS Radio

The built-in RDS radio module automatically listens to radio stations with stable frequency, providing enhanced radio information and features.

2.5 Bluetooth Hands-free and Music

Connect your mobile phone via Bluetooth to make and answer calls, play music, and automatically synchronize address books for a convenient and safe driving experience.

2.6 Steering Wheel Controls

The unit supports learning functions from your original car steering wheel buttons. This allows you to set the buttons on the steering wheel as function keys for the machine, making it easier to operate while driving.

2.7 USB Reading and Type-C Charging

The panel is equipped with a dedicated Type-C charging port and a USB reading port, allowing you to charge devices and play media from USB drives.

2.8 Reversing Video

When the vehicle is in reverse gear, the unit will automatically switch to the full-screen reversing image, provided a compatible camera is connected.

2.9 UI Interface Display

The unit features a user-friendly interface with various screens for different functions, including CarPlay, Android Auto, radio, Bluetooth, and settings.

3. Maintenance

To ensure the longevity and optimal performance of your BQCC F6021w car MP5 player, follow these general maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the finish.
• Temperature: Operate the unit within the specified working temperature range (-10~60℃). Extreme temperatures can affect performance and lifespan.
• Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent issues or damage.
• Software Updates: Keep the unit's software updated as recommended by the manufacturer to ensure compatibility and access to the latest features and bug fixes.

4. Troubleshooting

4.1 Cannot Boot Normally

1. Wiring Check: Ensure the yellow (B+), red (ACC), and black (GND) wires are correctly connected. Yellow and red should be connected to positive 12V (yellow to constant, red to ignition switch), and black to negative ground. Incorrect or incomplete connections will prevent booting.
2. Fuse Check: If the unit does not boot despite correct wiring, check if the fuse on the yellow line is broken. If the fuse is fine, try twisting the yellow and red wires together, then turn on the key and press the power button.
3. Short Circuit Protection: If the fuse repeatedly burns out, it indicates a short circuit in the unit's protection circuit. This requires professional after-sales service.

4.2 Automatic Shut-down

1. Blue Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it may cause automatic shutdown. Ensure correct wiring.
2. Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down automatically, the unit may be faulty.

4.3 Noise Issues

1. Speaker Power: If the original speaker power is too low, increasing the unit's volume may cause noise. Avoid setting the volume too high.
2. Grounded Speaker Cable: If a speaker cable is grounded, connect the iron speaker cable directly to the unit's speaker cable.

4.4 Remote Control Cannot Be Used

Test the remote control by pointing it at your mobile phone camera and pressing a button. If the phone camera shows a light, the remote control is working. If not, replace the battery.

4.5 Settings Cannot Be Saved (No Memory)

1. Ensure the yellow (B+) and red (ACC) wires are connected correctly (yellow to constant positive, red to ignition switch).
2. If yellow and red wires are reversed, simply swap their positions.

4.6 Bluetooth Not Working

Turn on the machine, search for its Bluetooth name using your mobile phone, and click Connect. After connecting, you should be able to answer calls or play songs via Bluetooth.

4.7 Product Emits Smoke

Replace the FUSE. If the problem persists, the internal circuit may be burned, requiring after-sales service.

4.8 Sound Cannot Be Adjusted

1. Reset the unit or unplug and re-plug the power cord.
2. If the volume knob is broken, it may need replacement.

4.9 Reversing Camera Does Not Display

1. Wiring Check: Ensure the reversing camera is correctly wired and connected.
2. Camera Fault: If the camera is properly wired but still doesn't display, the camera itself might be faulty and require replacement.

4.10 USB Devices Cannot Be Played

Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.

4.11 FM Does Not Receive Radio Stations

1. Ensure the antenna plug is fully inserted and the antenna line is not disconnected.
2. Perform an automatic station search (AMS/APS) or manually search using the 'before' or 'after' buttons.
3. If the above steps don't work, unplug the antenna plug and try inserting a screwdriver or a metal strip into the antenna port to test reception.

4.12 No Sound Right After Installation

If there is no sound immediately after installation, it is usually due to a wiring error or a short-circuited original car speaker wire. Check the speaker cables for short circuits and reconnect if necessary. Ensure the number of speaker cables matches your car's original wiring (e.g., 2 speakers need 4 cables).

4.13 No Sound After A While

Disconnect all speaker cables from the unit. Connect an external speaker to the gray and purple tail lines of the unit. If there is sound, it indicates a short circuit or damage in the car's speaker line. If there is no sound, the unit is faulty.

5. Specifications

5.1 General Specifications

5.2 Dimensions and Weight

5.3 RCA Port Parameters

• Audio Output: 2 channels (left channel + right channel)
• Video Output: 1 channel
• Video Input: 1 channel
• Reversing Video Input: 1 channel
• Subwoofer Output: 1 channel
• External Microphone Input: Support (external microphone optional)

5.4 Supported Formats

• Audio Format: MP3/WMA/WAV/APE/FLAC/AAC/OGG/RM
• Video Format: MPEG/AVI/RM/FLV/ASF/WMV/MP4/MKV/OGM/TS/DivX/RMVB/VOB
• Image Formats: JPG/BMP/PNG/JPEG/GIF

5.5 Wiring Protection

The unit features power supply positive and negative pole reverse connection protection. This means if the power line positive and negative poles are connected incorrectly, it will not cause the circuit board to burn, preventing damage to the machine.

5.6 IPS HD Screen

The 6.86-inch IPS HD screen provides high-definition picture quality with clear layers for an optimal viewing experience.

5.7 Installation Effect

The unit is designed for a seamless in-dash installation, blending well with your car's interior.

6. Warranty and Support

The BQCC F6021w comes with a 12-month manufacturer's limited warranty for defective items, excluding damage from misuse. Accessories typically have a 3-month warranty.

Defective items must be reported and returned within the warranty period. Please contact customer service for assistance with any issues or warranty claims.

For detailed information and further assistance, please refer to the official user manual PDF: BQCC F6021w User Manual (PDF).

7. User Tips

• Power On Issues: If the car radio doesn't turn on, double-check that the red and yellow wires are connected to the positive 12V supply (red to ignition, yellow to constant), and the black wire to negative ground. Also, inspect the fuse. Always use the provided power cords.
• "No Signal" on Reverse: Ensure the reversing camera's video line is securely connected to the "CAMIN" port on the car radio.
• Video Playback Warning: If you see a "!" or "Can not watch video while driving" message when playing videos via USB, navigate to the settings and turn off the "Warning" function.
• FM Radio Search: For better FM reception, ensure the radio antenna is fully inserted and properly connected. If issues persist, try inserting a metal strip or screwdriver into the antenna port to test for signal.