TEYUN A4

Contents

TEYUN A4 4 Channel Mini Audio Mixer

User Manual

Introduction

Thank you for choosing the TEYUN A4 4 Channel Mini Audio Mixer. This compact and versatile mixing console is designed for various audio applications, including home recording, live streaming, podcasting, and small performances. It features 4 input channels, built-in delay and repeat effects, Bluetooth connectivity, +48V phantom power for condenser microphones, and USB functionality for PC recording and playback. Please read this manual carefully to ensure proper operation and to get the most out of your device.

TEYUN A4 Mini Audio Mixer front view with controls and ports
Front view of the TEYUN A4 Mini Audio Mixer.

Key Features

  • 4 Input Channels (2 Mono + 1 Stereo)
  • Built-in Delay & Repeat Effects
  • Bluetooth Functionality for Wireless Audio Input
  • +48V Phantom Power for Condenser Microphones
  • USB Interface for PC Recording and Playback
  • USB Port for U-disk Playback and Recording
  • RCA Jacks for External Audio Devices
  • Compact and Portable Design
TEYUN A4 Mixer highlighting PC, 48V Phantom Power, and Phones compatibility
Key features of the TEYUN A4 Mixer.

Package Contents

Please check that all the following items are included in your package:

  • TEYUN A4 Audio Mixer x 1
  • Power Adapter x 1
  • User Manual (this document)
Image showing the TEYUN A4 mixer, power adapter, and packaging box
Items included in the package.

Setup

1. Power Supply

The TEYUN A4 mixer operates on 5V 2A power. You can power it using one of the following methods:

  • Adapter: Use the provided power adapter to connect to a wall outlet.
  • Power Bank: Connect to a compatible 5V 2A power bank.
  • Computer: Connect to a computer's USB port (ensure the computer can supply 5V 2A).
Diagram showing power bank, power adapter, and computer connected to the mixer's power input
Power supply options for the mixer.

2. Initial Connections

Before powering on, ensure all audio input and output devices are connected. Refer to the 'Connecting Devices' section for typical setups.

Operating Instructions

Controls Overview

Familiarize yourself with the various knobs and buttons on the mixer. Each channel typically includes GAIN, HIGH, LOW, EFX, and PEAK indicators. The main section includes DELAY, REPEAT, MAIN output, and PHONES output controls, along with USB/MP3 controls.

Bluetooth Operation

The mixer acts as a Bluetooth receiver, allowing you to stream audio wirelessly from your smartphone or other Bluetooth-enabled devices.

  1. Pairing: Turn on the mixer. On your device, search for Bluetooth devices and select "MIXING BT" to pair.
  2. Volume Adjustment:
    1. Press down the ST/USB button.
    2. Rotate the 3-4/USB knob to adjust the channel volume to the main output.
    3. Adjust the MAIN output knob for overall volume.

Note: The mixer cannot connect to other Bluetooth receiving devices like Bluetooth speakers.

Smartphone screen showing 'MIXING BT' available for Bluetooth connection
Bluetooth pairing with a smartphone.
Diagram showing the ST/USB button, 3-4/USB knob, and MAIN knob for Bluetooth volume adjustment
Bluetooth volume adjustment controls.
Diagram illustrating that the mixer is a Bluetooth receiver and cannot connect to Bluetooth speakers
The mixer functions as a Bluetooth receiver only.

USB/PC Recording & Playback

The mixer supports both U-disk and PC connectivity for recording and playing audio.

U-disk Recording

  1. U-disk Format: Ensure your U-disk is formatted to FAT32. The mixer cannot recognize NTFS U-disks.
  2. U-disk Content: There must be at least one song on the FAT32 U-disk for recording functionality to work correctly.
  3. Connection: Press down the MP3/PC button on the back panel of the audio mixer. Insert a FAT32 U-disk into the USB port.
  4. Record Format: MP3.
  5. Recording Operation:
    1. Short press the MODE button to switch to REC mode.
    2. Long press the pause (continue) button to start recording.
    3. Long press the pause (continue) button again to exit recording and resume playing previous music files.
    4. During recording, a short press of the pause (continue) button will pause/continue recording.
  6. Record Volume Adjust: Adjust using the same method as Bluetooth volume control (ST/USB button, 3-4/USB knob, MAIN knob).
  7. Recording Parameter: 16Bit 48KHz.
Diagram showing a USB flash drive connected to the mixer's USB port and a laptop connected via USB cable
USB port for U-disk and PC connection.
Display showing '88:88' before U-disk recording and '00:18' during recording
U-disk recording display indication.

U-disk Playback

  1. Play Formats: MP3, FLAC, WAV, WMA.
  2. Connection: Press down the MP3/PC switch button. Insert a U-disk into the USB port; playback will start automatically.
  3. Volume Adjust: Same as Bluetooth volume control.
Diagram showing pressing the MP3/PC button and inserting a U-disk for playback
U-disk playback steps.

PC Recording & Playback

  1. Connection: Use the provided USB cable to connect the mixer to your computer.
  2. Mode Selection: Bounce up (release) the MP3/PC button.
  3. Volume Adjust: Same as Bluetooth volume control.
  4. Recording Parameter: 16Bit 48KHz.
Diagram showing the mixer connected to a laptop via USB cable for PC recording and playback
PC recording and playback setup.

Important: The USB port on the mixer is not for USB microphones. Do not connect USB microphones directly to the audio mixer's USB port.

Warning against connecting USB microphones to the mixer's USB port
USB port is not for USB microphones.

Phantom Power (+48V)

The mixer provides +48V phantom power for compatible condenser microphones.

  1. Activation: Press down the +48V button. The LED light will illuminate, indicating that +48V phantom power is active.
  2. Compatibility: +48V phantom power is only supplied through the XLR sockets, not the 6.3mm (1/4") sockets.
Diagram showing the +48V button and clarifying that phantom power is only for XLR sockets
Activating +48V phantom power.

Connecting Microphones:

  • Dynamic Microphones: When connecting a dynamic microphone via an XLR cable, do NOT activate +48V phantom power.
Diagram showing a dynamic microphone connected via XLR cable, with a warning not to use +48V phantom power
Connecting a dynamic microphone.
  • +48V Condenser Microphones: If you are using a +48V condenser microphone, connect it to the mixer via an XLR cable and then activate +48V phantom power.
Image showing a condenser microphone connected to the mixer with +48V phantom power active
Connecting a +48V condenser microphone.
Diagram showing a condenser microphone connected via XLR cable, with instructions to use +48V phantom power
Connecting a +48V condenser microphone.

Warning: This mixer does not support non-48V condenser microphones (e.g., 3.5mm plug computer microphones).

Warning against using non-48V condenser microphones with the mixer
Non-48V condenser microphones are not supported.

Effects (Delay & Repeat)

The built-in delay and repeat effects are available for channels 1 and 2.

  1. Activation: Press down the EFX button for the desired channel (1 or 2).
  2. Effect Output:
    1. Rotate the volume knob of the channel.
    2. Rotate the REPEAT/DELAY knobs to adjust the effect parameters.
    3. Rotate the MAIN knob for overall output.

Note: Before using the DELAY effect, you must rotate the REPEAT effect knob to a position greater than "0". Otherwise, there will be no delay effect output.

Close-up of the Delay and Repeat effect knobs on the mixer
Delay and Repeat effect controls.

Gain Adjustment

The GAIN knob controls the input sensitivity of each channel.

  • Adjust the GAIN knob only when the input signal is insufficient.
  • The PEAK light indicates signal distortion. If the PEAK light is on, the signal is too strong and distorted. Reduce the GAIN until the PEAK light turns off.
  • Increasing the GAIN knob will increase both the signal level and the noise level.
Diagram explaining gain adjustment and the PEAK indicator light
Gain knob and PEAK indicator explanation.

RCA Jack Usage

The RCA jacks (LEFT/RIGHT) allow you to connect external audio sources such as CD players, mobile phones, or active speakers.

Diagram showing RCA jacks connected to a CD player and a mobile phone
Connecting devices via RCA jacks.

Headphone Volume Control

To adjust the headphone volume:

  1. Rotate the MAIN volume knob.
  2. Rotate the PHONES volume knob.
Close-up of the MAIN and PHONES volume knobs for headphone control
Headphone volume controls.

Connecting Devices

The TEYUN A4 mixer offers various connection options for different audio setups:

  • Microphones: Connect dynamic microphones or +48V condenser microphones via XLR and 1/4" (6.3mm) jacks.
  • Computer/U-disk: Connect to a computer or U-disk via the USB port for recording and playback.
  • Mobile Phone: Connect wirelessly via Bluetooth.
  • Headphones: Connect headphones to the PHONES output.
  • External Audio Players: Connect devices like DVD players or music players via the RCA sockets.
  • Output to Speakers: Connect the main output to a power amplifier, which then connects to passive speakers, or directly to active speakers.
Comprehensive diagram showing connections for computer, power amplifier, passive speakers, condenser mic, dynamic mic, wireless mic, and headphones to the mixer
Typical connection diagram for the TEYUN A4 mixer.

Specifications

FeatureDetail
Model NumberA4
TypeMixers
Channels4 (2 Mono + 1 Stereo)
Power SourceDC 5V 2A
Built-in BatteryNo
Inbox AdaptorYes
Phantom Power+48V (for XLR sockets only)
EffectsDelay & Repeat
USB FunctionalityU-disk Playback/Recording, PC Recording/Playback
U-disk FormatFAT32
U-disk Playback FormatsMP3, FLAC, WAV, WMA
Recording Parameter16Bit 48KHz
BluetoothYes (Receiver only)
Dimensions (L x W x H)18.5 cm x 17.5 cm x 5.5 cm (7.28 in x 6.89 in x 2.17 in)
OriginMainland China
CertificationCE
Diagram showing the dimensions of the TEYUN A4 mixer: 18.5 cm (7.28 in) length, 17.5 cm (6.89 in) width, 5.5 cm (2.17 in) height
Product dimensions.
Product size diagram with measurements
Detailed product size measurements.

Troubleshooting

  • No Sound Output:
    - Check all cable connections (inputs, outputs, power).
    - Ensure all volume knobs (GAIN, channel volume, MAIN, PHONES) are turned up appropriately.
    - Verify that the correct input source is selected (e.g., ST/USB button for Bluetooth/USB).
  • Distorted Sound:
    - Check the PEAK indicator lights on each channel. If lit, reduce the GAIN knob for that channel.
    - Ensure input levels from connected devices are not too high.
  • Bluetooth Not Connecting:
    - Make sure the mixer is powered on and in Bluetooth mode.
    - Ensure your device's Bluetooth is enabled and searching for

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.