1. Introduction
Thank you for choosing the LEAP Digital Chess Clock. This device is designed to enhance your chess, Chinese chess, I-GO, Scrabble, and other two-player board game experiences by accurately managing game time. It features multiple timing functions, an easy-to-read LED display, and a durable ABS plastic construction.
This manual provides detailed instructions for setting up, operating, and maintaining your chess clock to ensure optimal performance and enjoyment.



2. Setup
2.1. Battery Installation
The LEAP Digital Chess Clock requires batteries (not included) for operation. Please ensure you have the correct type and quantity of batteries as specified in the specifications section.
- Locate the battery cover on the bottom of the chess clock.
- Open the battery cover.
- Insert the batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
2.2. Initial Power On
After installing the batteries, locate the ON/OFF switch on the bottom of the device and slide it to the 'ON' position. The display should light up.

2.3. Basic Time Setting (PQ9917 Quick Start)
For PQ9917 model, follow these quick start steps:
- Turn the clock ON using the switch on the bottom.
- Set the rocker switch (the side where it starts).
- Press the Play/Pause (►►/▷) button briefly.
- To set the time, press the Play/Pause (►►/▷) button for 2 seconds. Use the +/- buttons to adjust the time. Move forward by short pressing the Play/Pause (►►/▷) button.
- When finished, press the Play/Pause (►►/▷) button again for 2 seconds to start the clock.
3. Operation
The LEAP Digital Chess Clock offers various functions including time, bonus, delay, move count, countdown, count-up, and alarm. Different models may have slight variations in button labels or specific pre-programmed settings.

3.1. General Button Functions (PQ9923)

- +/UP Button:
- To choose time modes: Press briefly.
- To add '1' if in setting mode: Press briefly.
- To turn on/off 'UP' (count-up function): Long press. - - /♫ Button:
- To choose time modes: Press briefly.
- To subtract '1' if in setting mode: Press briefly.
- To turn alarm on/off: Long press. - ►►/▷ Button (Start/Pause/Setting):
- To start or pause the game: Press briefly.
- To enter/exit setting mode: Long press.
3.2. General Button Functions (PQ9921)

- Press/hold both +/- 3s: To view/adjust move number.
- Press/hold + or - 3s: To set penalty.
- + Button:
- Increase value of flashing digit.
- Hold 3s to enter freeze/off. - - Button:
- Decrease value of flashing digit.
- Press to turn alarm on/off. - ►►/▷ Button (Run/Pause/Set):
- Press briefly to run/pause.
- Hold 3s to enter/exit settings.
3.3. Time Modes and Functions
The clock supports various timing methods suitable for different game types:
- Countdown: Set a specific time for each player to count down from.
- Count-up: Starts from 0:00 00 when 'UP' is active. Can automatically switch from countdown to count-up.
- Bonus (Increment): Adds a set amount of time after each move.
- Delay: Delays the start of the countdown for a set period after a player's turn begins.
- Move Count: Tracks the number of moves made by each player.
- Alarm Function: An audible alarm can be turned on or off.
- Setting Memory: The clock can store custom timing modes. (Note: If batteries are removed, user-set parameters may be lost for some models).

3.4. Setting Custom Times
The clock allows for creating and saving custom timing modes. Refer to the specific model's detailed instructions (e.g., PQ9921's time control table) for advanced settings.
PQ9923 Preset Time Modes:
- Time: 5 minutes blitz
- Bonus: 30 minutes + 5 seconds/move
- Delay: 45 minutes + 10 seconds/move
3.5. Count-Up Function Methods

Method 1:
- Set both player times to 0:00 00.
- Press the [+/UP] button for 3 seconds to display the "UP" icon. The clock will start counting up immediately.
Method 2:
- Press the [+/UP] button for 3 seconds to display the "UP" icon.
- Start the countdown as usual. When the countdown ends, the clock will automatically switch to count-up mode.
4. Maintenance
4.1. Cleaning
To clean your chess clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Gently wipe the display and casing to remove dust and fingerprints.
4.2. Battery Replacement
When the display becomes dim or the clock functions erratically, it's time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace all batteries at the same time with new ones of the same type.
4.3. Storage
If the chess clock will not be used for an extended period, remove the batteries to prevent leakage and damage. Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock does not turn on. | Dead or incorrectly installed batteries. | Check battery polarity, replace with new batteries. Ensure ON/OFF switch is in 'ON' position. |
| Display is dim or flickering. | Low battery power. | Replace batteries. |
| Buttons are unresponsive. | Device frozen or in an unexpected state. | Turn the clock OFF, then ON again. If issue persists, remove and reinsert batteries. |
| Time settings are not saved. | Batteries removed (for some models). | Re-enter desired settings. Avoid removing batteries if you wish to retain custom settings. |
| Alarm does not sound. | Alarm function is turned off. | Long press the '-' button to toggle the alarm on/off. |
6. Specifications
| Feature | Description |
|---|---|
| Material | ABS Plastic |
| Screen Type | LED Digital Display |
| Functions | Time, Bonus, Delay, Move Count, Countdown, Count Up, Alarm, Setting Memory |
| Power Source | Batteries (not included) |
| Item Size (PQ9923) | 135 x 100 x 40mm (5.31 x 3.94 x 1.57in) |
| Item Weight (PQ9923) | 141g (4.97oz) |
| Item Size (PQ9917/PQ9921) | 143 x 83 x 42mm (5.62 x 3.26 x 1.65in) |
| Item Weight (PQ9917/PQ9921) | 162g (5.71oz) |


7. User Tips
- Practice Settings: Before a competitive game, familiarize yourself with the various time modes and settings by practicing with the clock.
- Battery Check: Always ensure fresh batteries are installed, especially before important games, to avoid interruptions.
- Clear Display: Position the clock to avoid glare on the LED display for optimal visibility for both players.
- Gentle Handling: While durable, avoid dropping or subjecting the clock to harsh impacts to maintain its functionality and lifespan.
- Custom Modes: Utilize the custom timing mode feature to tailor game settings to your specific preferences or tournament rules.
8. Warranty and Support
For any issues, questions, or support needs regarding your LEAP Digital Chess Clock, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
9. Additional Resources
For a more detailed guide and comprehensive instructions, you can refer to the official user manual in PDF format: