1. Introduction
The Autel MaxiCOM MK808S is a portable diagnostic tool designed for comprehensive vehicle diagnostics. It features a fast quad-core processor and a 7-inch LCD touchscreen with 1024x600 resolution, running on Android 11.0. This device offers a wide range of diagnostic and service functions, including reading and clearing Diagnostic Trouble Codes (DTCs) for all available modules, as well as specialized functions like Oil Reset, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), Battery Management System (BMS), Diesel Particulate Filter (DPF), Immobilizer (IMMO), and Tire Pressure Monitoring System (TPMS).
The MaxiCOM MK808S is an upgraded version of the MK808, offering enhanced performance and features. It is designed to streamline diagnostic efforts and provide accurate fault identification for a broad range of vehicles.

Figure 1.1: Autel MaxiCOM MK808S Diagnostic Tool
1.1 Product Overview
The MaxiCOM MK808S tablet features a 7.0-inch LCD capacitive touchscreen, an ambient light sensor for automatic brightness adjustment, a power LED indicating battery and system status, and a vehicle communication LED that flashes green during communication with the vehicle.
Video 1.1: Unboxing the Autel MaxiCOM MK808S, showing the contents of the carrying case.
1.2 Package Contents
The MaxiCOM MK808S package typically includes:
- MaxDAS Tablet (Main unit)
- User Manual
- Quick Guide
- Mini USB Cable
- USB External Power Adapter
- Main Cable (OBDII connection cable)
- Carry case

Figure 1.2: Contents of the MaxiCOM MK808S package, including the tablet, cables, and documentation.
2. Safety Information
For your own safety and the safety of others, and to prevent damage to the device and vehicles, it is crucial to read and understand all safety instructions provided in this manual.
2.1 Safety Messages
Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or bystanders.
When an engine is operating, ensure the service area is WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or bystanders.
2.2 Safety Warnings
- Always perform automotive testing in a safe environment.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area, as exhaust gases are poisonous.
- Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and ensure the parking brake is engaged.
- Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Be extra cautious when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
- Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Keep the test equipment dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
- Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.
- Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
- To avoid damaging the test equipment or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
- Do not place the test equipment on the distributor of the vehicle. Strong electromagnetic interference can damage the equipment.
3. Setup and Getting Started
3.1 Power Sources
The tablet can receive power from its internal battery pack, vehicle power, or an external power supply.
- **Internal Battery Pack:** The tablet is powered by an internal rechargeable battery, providing approximately 7 hours of continuous use when fully charged.
- **Vehicle Power:** When connected to the vehicle via the main cable, the tablet automatically receives power from the vehicle.
- **External Power Supply:** The tablet can be powered from a wall socket using the included mini USB cable and power adapter. The external power supply also charges the internal battery pack.
3.2 Power Up
Ensure the tablet is sufficiently charged or connected to an external power supply.
- Press and hold the Power/Lock button on the top-right of the tablet.
- The power LED will illuminate green, and the system will boot up, displaying the lock screen.
- Slide the Lock icon up to unlock the screen.
3.3 Power Down
All vehicle communications should be terminated before shutting down the tablet. Forcing a shutdown while communicating with the vehicle may lead to ECU problems. Exit the Diagnostics application before powering down.
- Press and hold the Power/Lock button.
- Tap Power off. The tablet will turn off in a few seconds.
3.4 Accessory Kit
The MaxiCOM MK808S comes with essential accessories for its operation:
- **Main Cable:** Connects the tablet to the vehicle's OBDII port (DLC).

Figure 3.1: Main Cable for connecting the diagnostic tool to the vehicle's OBDII port.
- **Mini USB Cable & Power Adapter:** Used to connect the tablet to a computer or for external power supply.
- **Quick Reference Guide:** Provides device connection and diagnostic software update instructions.
3.4.1 OBDI Adapters (for MP808S KIT Only)
For non-OBDII vehicles, specific adapters are required. The adapter used depends on the test vehicle. Common adapters include:
- Benz-14 (Europe only)
- Nissan-14
- Mitsubishi/Hyundai-12+16
- Chrysler-16 (America only)
- BMW-20
- Volkswagen/Audi-2+2
- Fiat-3 (Europe only)
- Benz-38
- GM/Daewoo-12
- PSA-2 (Europe only)
- Honda-3
- Kia-20
4. Operating Instructions
4.1 Vehicle Identification
The MaxiPRO diagnostics system supports four methods for vehicle identification:
- **Auto VIN Scan:** Identifies vehicles with one tap by scanning the VIN.
- **Manual Input:** Allows manual entry of the VIN for vehicles not supporting Auto VIN Scan.
- **Automatic Selection:** Automatically acquires VIN information after a vehicle manufacturer is selected.
- **Manual Vehicle Selection:** For cases where VIN is not retrievable or unknown, allowing manual selection through menu prompts.
4.1.1 Performing Auto VIN Scan
- Tap the Diagnostics button from the MaxiPRO Job Menu.
- Tap the VID Scan button on the top toolbar.
- Select Auto Detect. The tablet will scan the vehicle's ECU for the VIN.
- Once identified, the vehicle VIN will be displayed. Tap OK to confirm.

Figure 4.1: AutoVIN and All System Diagnostics interface, showing options for VIN input, DTCs, and live data.
4.2 Diagnostics Screen Layout
After vehicle identification, the diagnostic menu appears, offering functions like Auto Scan and Control Unit. The screen typically includes a Diagnostics Toolbar, Status Information Bar, Main Section, and Function Buttons.
4.3 Diagnosis Functions
The Diagnostics application enables communication with the vehicle's electronic control system for various diagnostic tasks.
4.3.1 Auto Scan
Performs a comprehensive scan of all ECUs to locate faults and retrieve DTCs.
4.3.2 Control Unit
Allows manual selection of a specific control system for testing.
4.3.3 Live Data
Retrieves and displays real-time PID data from the ECU. Data can be viewed in various modes: Analog Gauge, Text, and Waveform Graph. Gesture scrolling allows easy navigation through data lists.
4.3.4 Active Test (Bi-directional Control)
This function allows the tablet to send commands to the ECU to activate actuators, enabling testing of vehicle-specific components (e.g., turning on/off lights, fuel pump, modulating throttle, operating windows/mirrors). This helps quickly identify whether a problem lies within the controls or the vehicle system.

Figure 4.2: Bi-directional control in action, demonstrating the ability to test components like lights, fuel pump, A/C clutch, and window wipers.
4.3.5 Special Functions
These functions perform component adaptations, recalibration, or configuration after repairs or replacements. Examples include Brake pedal position sensor learn, Crankshaft position variation learn, Engine oil life reset, Fuel pump trim reset, Fuel trim reset, HO2S heater learn, and Idle learn.
4.3.6 Coding
Opens a menu of operation options that vary by vehicle make and model, allowing for coding operations.
4.3.7 Generic OBDII Operations
Offers a quick way to check for DTCs, isolate the cause of a Malfunction Indicator Lamp (MIL), check monitor status, and perform other emissions-related services for OBDII/EOBD-compliant vehicles.
5. Service Functions
The Service application provides quick access to various scheduled service and maintenance tasks. The MaxiCOM MK808S offers over 36 commonly used reset and relearn functions.

Figure 5.1: Overview of 36+ special service functions available on the MK808S, including Oil Reset, SAS, EPB, BMS Reset, DPF, ABS Bleeding, Immobilizer, Sunroof Reset, Suspension Reset, Gearbox Reset, and Injector Coding.
5.1 Oil Reset Service
Performs a reset for the Engine Oil Life system, which calculates an optimal oil life change interval. The Oil Life Reminder must be reset after each oil change.
IMPORTANT
- Always reset the engine oil life to 100% after every oil change.
- All required work must be carried out before service indicators are reset.
5.2 Electronic Parking Brake (EPB) Service
Maintains the electronic braking system by deactivating/activating the brake control system, assisting with brake fluid control, opening/closing brake pads, and setting brakes after disc or pad replacement.
5.3 Battery Management System (BMS) Service
Evaluates battery charge state, monitors closed-circuit current, registers battery replacement, and activates the vehicle's rest state. It is recommended that replacement batteries match the original specifications.
5.4 Steering Angle Sensor (SAS) Service
Performs calibration for the Steering Angle Sensor (SAS), permanently storing the current steering wheel position as the straight-ahead position. Calibration is necessary after operations like steering wheel replacement, steering angle sensor replacement, or any maintenance involving the steering system.
5.5 Diesel Particulate Filter (DPF) Service
Manages DPF regeneration, DPF component replacement teach-in, and DPF teach-in after replacing the engine control unit.
IMPORTANT
Before performing a forced DPF regeneration, check that the fuel light is not on, no DPF-relevant faults are stored, the vehicle has the specified engine oil, and the oil is not contaminated.
5.6 Tire Pressure Monitor System (TPMS) Service
Allows looking up tire sensor IDs from the vehicle's ECU and performing TPMS replacement and reset procedures.
5.7 Immobilizer (IMMO) Service
An immobilizer is an anti-theft mechanism that prevents an automobile's engine from starting without the correct ignition key. The IMMO service can disable a lost vehicle key and program replacement key fobs.
6. Data Management
The Data Manager application allows you to store, print, and review saved files, manage workshop and customer information, and keep test vehicle history records.
6.1 Vehicle History
Stores vehicle test records, including vehicle information and retrieved DTCs from previous diagnostic sessions. Provides direct access to previously tested vehicles to restart diagnostic sessions.
6.2 Workshop Information
Allows entering, editing, and saving detailed workshop information (shop name, address, phone number) which will appear as the header of printed documents.
6.3 Customer
Enables creation and editing of customer accounts, correlating customer information with associated test vehicle records.
6.4 Image
A database containing all captured screenshots.
6.5 Cloud Report
Displays saved reports that can be transferred to the Autel cloud platform for viewing or sharing.
6.6 PDF Files
Displays PDF files for local viewing. Uses the standard Adobe Reader application.
6.7 Review Data
Allows playback of recorded data frames from live data streams.
6.8 Data Logging
Launches the Support platform to view records of feedback or no feedback data logs on the diagnostic system.
6.9 Uninstall Apps
Manages firmware applications installed on the MaxiPRO diagnostics system, allowing deletion of vehicle brand firmware.
7. Settings
The Settings application allows adjustment of default settings and viewing of MaxiPRO system information.
7.1 Unit
Adjusts the measurement unit for the diagnostics system.
7.2 Language
Adjusts the display language for the MaxiPRO system. The device supports English, German, Spanish, Japanese, Portuguese, Dutch, French, Italian, Korean, Russian, Polish, Swedish, Persian, Turkish, Thai, Vietnamese, Hebrew, Arabic, and Indonesian.

Figure 7.1: Step-by-step guide on how to change the language settings on the MaxiCOM MK808S.
7.3 Printing Settings
Allows printing from the tablet to a network printer via a computer. Requires MaxiSys PC Suite software installation.
7.4 Report Settings
Automatically synchronizes diagnostic information to vehicle history and forms a diagnostic report for upload to the cloud.
7.5 Firmware Upgrade
Allows upgrading the tool's firmware. Requires connection to the vehicle via DLC and mini USB cable for power, and an internet connection.
7.6 Auto Update
Sets specific times for automatic software updates (OS Update, MaxiPRO Update, Vehicle Update). Requires an internet connection.
7.7 Vehicle List
Sorts vehicles by alphabetic order or frequency.
7.8 System Settings
Provides direct access to Android system settings for wireless, network, device, sound, display, and security settings.
7.9 About
Displays MaxiPRO diagnostics device information, including product name, version, hardware, and serial number.
8. Maintenance and Service
8.1 Maintenance Instructions
- Use a soft cloth and alcohol or a mild window cleaner to clean the touchscreen.
- Do not use abrasive cleansers, detergent, or automotive chemicals.
- Maintain devices in dry conditions and within normal operating temperatures.
- Dry hands before using the tablet.
- Do not store devices in humid, dusty, or dirty areas.
- Check housing, wiring, and connectors for dirt and damage before and after each use.
- Wipe device housing, wiring, and connectors clean with a damp cloth after use.
- Do not attempt to disassemble the tablet.
- Do not drop or cause severe impact to the devices.
- Only use authorized battery chargers and accessories.
- Ensure the battery charger does not contact conductive objects.
- Do not use the tablet beside microwave ovens, cordless phones, or some medical/scientific instruments to prevent signal interference.
8.2 Troubleshooting Checklist
- **Tablet not working properly:** Ensure registered online, software updated, connected to internet, and all cables/connections are secure.
- **Shorter battery life:** May occur in low signal strength areas. Turn off when not in use.
- **Cannot turn on tablet:** Ensure connected to power source or battery is charged.
- **Unable to charge tablet:** Check charger, charging environment (temperature), and proper connection.
8.3 About Battery Usage
The tablet is powered by a built-in Lithium-ion Polymer battery. It can be recharged even with some charge remaining without memory effect.
DANGER
- The built-in Lithium-ion Polymer battery is factory replaceable only; incorrect replacement or tampering may cause an explosion.
- Do not use a damaged battery charger.
- Do not disassemble, crush, bend, deform, puncture, or shred.
- Do not modify or remanufacture, attempt to insert foreign objects into the battery, expose to fire, explosion, or other hazards.
- Use only the charger and USB cables provided.
- Avoid dropping the tablet.
- Battery recharging time varies.
- Remove the tablet from its charger once fully charged to prevent shortening battery life.
- Avoid leaving the tablet in hot or cold places.
9. Specifications
| Item | Description |
|---|---|
| Recommended Use | Indoor |
| Operating System | Android™ 11 |
| Processor | Quad-core 1.8GHz Rockchip RK3566 |
| RAM | 4GB |
| Memory | 64GB |
| Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
| Connectivity | Mini USB 2.0, USB 2.0, Wi-Fi (2.4 & 5 GHz), Micro SD card (supports up to 32 GB) |
| Sensor | Ambient light sensor |
| Audio Input/Output | Input: N/A, Output: buzzer |
| Power and Battery | 3.7 V/5000 mAh lithium-polymer battery, Charges via 5 V DC power supply |
| Tested Battery Life | Around 7 hours of continuous use |
| Battery Charging Input | 5 V/2 A |
| Power Consumption | 500 mA (LCD on with default brightness, Wi-Fi on) @ 3.7 V |
| Operating Temp. | 0 to 50 °C (32 to 122 °F) |
| Storage Temp. | -20 to 60 °C (-4 to 140 °F) |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions (W x H x D) | 237.8 mm (9.4") x 148.6 mm (5.9") x 35.5 mm (1.4") |
| Net Weight | 788 g (2.42 lbs.) |
| Supported Automotive Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (High-speed, Middle-speed, Low-speed and Single-wire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
| Automotive fit type | Universal fit |
| Battery Included | Yes |
| Wireless Support | No |
| Special Features | Wifi |
| Software Update | Yes (1 year update included) |
| Language | Arabic, Dutch, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, THAI, Turkish |
| Software Version | the Newest Version |
| Hardware Version | MK808S Code Reader |
| Origin | Mainland China |
| Item Type | Code Readers & Scan Tools, Automotive Diagnostic-Tool |
| Certification | CE |
| Tested Battery Life | Around 4.5 hours of continuous use |
| Warranty | 1 year worry-free warranty |
10. User Tips
- **Language Activation:** After receiving your product, provide the device's Serial Number (SN) to Autel support to activate your desired language. The SN can be found on the back of the device or in the menu path “Maxisys-> Settings -> About Us”.
- **AutoVIN Functionality:** The AutoVIN recognition feature is not 100% available for all vehicles. If it doesn't work, you may need to manually input the VIN for a precise scan. Ensure the car was made after 2006 and has a stable network connection for optimal AutoVIN performance.
- **Service Function Location:** If you cannot find a specific service function, navigate to your car's specific software (e.g., “Chevy Software” -- “System Selection” -- “Transmission Control Module (TCM)” -- “Service Functions”) and follow the on-screen instructions.
- **FCA SGW Access:** For 2018+ FCA SGW-equipped vehicles (Chrysler, Fiat, Dodge, Jeep, Alfa Romeo, etc.), register with AutoAuth Services to gain diagnostic access.
- **Endoscope Compatibility:** The MaxiCOM MK808S can work with optional endoscopes like Autel MaxiVideo MV105 & MV108 for inspecting hard-to-reach areas. These are sold separately.
11. Support and Warranty
11.1 Technical Support
For any questions or problems with the product, contact Autel's technical support or your local distributor.
Autel China Headquarters
- Phone: +86 (0755) 8614-7779 (Monday-Friday, 9AM-6PM Beijing Time)
- Email: support@autel.com
- Address: Floor 2, Caihong Keji Building, 36 Hi-tech North Six Road, Songpingshan Community, Xili Sub-district, Nanshan District, Shenzhen City, China
- Web: www.autel.com
Autel North America
- Phone: 1-855-288-3587 (Monday-Friday, 9AM-6PM Eastern Time)
- Email: ussupport@autel.com
11.2 Remote Desktop
The Remote Desktop application launches the TeamViewer QuickSupport program, enabling you to receive remote support from Autel's support center, colleagues, or friends by allowing them to control your MaxiPRO tablet via TeamViewer software on their PC.
To receive remote support from a partner:
- Power on the tablet.
- Tap the Remote Desktop application on the MaxiPRO Job Menu. The TeamViewer QuickSupport screen will appear, displaying your device ID.
- Your partner must install the TeamViewer program on their PC (available at http://www.teamviewer.com).
- Provide your device ID to your partner.
- A prompt will appear asking you to allow remote control. Tap Allow to accept or Deny to reject.
11.3 Limited One Year Warranty
Autel Intelligent Technology Corp., Ltd. (the Company) warrants to the original retail purchaser that this MaxiPRO Diagnostic Device, should it prove defective in material or workmanship under normal consumer usage and conditions, will be repaired or replaced (with new or rebuilt parts) within one (1) year from the date of purchase, without charge for parts or labor directly related to the defect(s).
NOTE
If the warranty period is inconsistent with local laws and regulations, please comply with the relevant local laws and regulations.
The Company is not liable for incidental or consequential damages arising from misuse. This warranty does not apply to products subjected to abnormal use, mishandling, unauthorized alteration, damage from excessive temperatures, or external causes like fire or battery leakage.
It is recommended to create a backup copy of all product contents before sending the device for warranty service, as all contents may be deleted during repair.