K&F CONCEPT O234A1

Contents

K&F CONCEPT O234A1 Camera Tripod User Manual

Model: O234A1

1. Product Overview

The K&F CONCEPT O234A1 is a lightweight and portable aluminum tripod designed for various photography needs, including video cameras, point & shoot cameras, smartphones, and mirrorless system cameras. It features an inverted central axis for macro photography, a stable ball head with 360-degree panoramic capabilities, and quick-release leg locks for easy setup.

K&F CONCEPT O234A1 Tripod with phone holder and ball head
Figure 1: K&F CONCEPT O234A1 Tripod with included accessories.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 x O234A1 Tripod
  • 1 x Phone Holder
  • 1 x Carry Bag
  • 1 x Allen Wrench
  • 1 x Instruction Manual (this document)
  • 1 x Box
Image showing the packing list: tripod, phone holder, carry bag, Allen wrench, instruction manual, and box.
Figure 2: Contents of the K&F CONCEPT O234A1 package.

3. Setup Guide

3.1 Unfolding the Tripod

  1. Remove the tripod from its carry bag.
  2. Loosen the leg locks on each leg section.
  3. Extend the legs to the desired length.
  4. Securely fasten the leg locks.
A hand holding the folded tripod, showing its compact 39cm length.
Figure 3: The tripod folds down to a compact 39cm (15.4 inches) for portability.

3.2 Attaching Your Device

  1. Ensure the quick release plate is securely attached to your camera or phone holder.
  2. Align the quick release plate with the ball head's receiver.
  3. Press down and slide the plate into place until it clicks, then tighten the locking knob on the ball head to secure it.
  4. For smartphones, attach the phone holder to the quick release plate, then insert your smartphone into the holder.
Tripod with a smartphone attached using a phone holder, demonstrating mobile phone shooting.
Figure 4: Using the quick release plate and phone holder for smartphone photography.

4. Operating Instructions

4.1 Adjusting Tripod Height and Leg Angles

  • Height Adjustment: Loosen the leg locks on each section to extend or retract the legs. The tripod can be adjusted from a minimum height of 50cm (19.7 inches) to a maximum extended length of 163cm (64.2 inches).
  • Leg Angle Adjustment: Use the leg angle adjustment buttons located at the top of each leg to set the desired spread angle. This allows for stable positioning on uneven terrain or for achieving lower shooting angles.
Diagram showing various tripod heights from 395mm (folded) to 1630mm (max extended) and a person using it.
Figure 5: Tripod height variations and a user demonstrating its use.
Close-up of the tripod leg hinge, illustrating three types of angle adjustment.
Figure 6: Three types of leg angle adjustment for versatile positioning.

4.2 Using the Ball Head (BH-28L)

  • Positioning: Loosen the main locking knob on the ball head to adjust the camera's angle freely. Tighten the knob to secure the camera in position. The 28mm large sphere ensures stability.
  • Panoramic Shooting: The ball head features a 360-degree horizontal scale at its base. Loosen the panoramic lock knob (if present) to rotate the camera smoothly for panoramic shots, then tighten to lock.
Image showing a camera mounted on the ball head, demonstrating its tilting capabilities and maximum load capacity of 10kg/22lbs.
Figure 7: Ball head demonstrating tilting and maximum load capacity.
Camera on tripod performing a 360-degree panoramic shot with a degree scale visible.
Figure 8: Achieving 360-degree panoramic shooting with the ball head.

4.3 Inverted Central Axis for Macro Photography

For macro photography or unique low-angle shots, the central axis can be inverted. This allows your camera to be positioned closer to the ground or even below the tripod's base.

  1. Fully extend the central axis.
  2. Locate the locking mechanism for the central axis (usually a knob at the base of the column).
  3. Loosen the locking mechanism and carefully remove the central axis.
  4. Reinsert the central axis upside down and secure it with the locking mechanism.
Tripod set up for inverted shooting, with the camera positioned low for macro photography.
Figure 9: Inverted central axis setup for macro photography.

4.4 Stability Hook

The bottom of the central axis is equipped with a retractable hook. In windy conditions or when extra stability is required, you can hang a weight (e.g., your camera bag) from this hook to lower the tripod's center of gravity and enhance stability.

5. Maintenance

  • Cleaning: Wipe down the tripod legs and ball head with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals.
  • Lubrication: The ball head features an oil-free damping design, requiring no lubrication. Do not apply oil or grease to any part of the ball head.
  • Storage: When not in use, fold the tripod to its compact size and store it in the provided carry bag to protect it from dust and damage. Store in a cool, dry place.
  • Inspection: Periodically check all screws, knobs, and leg locks to ensure they are tight and functioning correctly. Use the provided Allen wrench for any adjustments if necessary.

6. Troubleshooting

  • Tripod is unstable:
    • Ensure all leg locks are fully tightened after extending the legs.
    • Verify that the leg angle adjustment buttons are securely engaged at the desired angle.
    • If shooting in windy conditions, use the stability hook on the central axis to hang a weight.
    • Ensure the ground surface is as level as possible.
  • Camera not secure on ball head:
    • Make sure the quick release plate is correctly inserted and the main locking knob on the ball head is fully tightened.
    • Check that the quick release plate is securely attached to your camera or phone holder.
  • Legs not extending/retracting smoothly:
    • Check for any debris or sand inside the leg sections. Clean if necessary.
    • Ensure leg locks are fully disengaged before attempting to extend or retract.

7. Specifications

FeatureSpecification
Brand NameK&F CONCEPT
Model NumberO234A1
TypeProfessional Tripod
MaterialAluminum
Max Extended Length1630mm (64.2 inches)
Folded Length390mm (15.4 inches)
Net Weight1.29kg (2.8 lbs)
Max Load Capacity10kg (22 lbs)
Leg Sections4
Tube Diameter2.3cm (0.91 inches)
Ball Head ModelBH-28L
Ball Head Weight Capacity10kg (22 lbs)
Ball Head Net Weight0.26kg (0.58 lbs)
Ball Head Height8cm (3.15 inches)
Ball Head Bottom Connection3/8"
Ball Head MaterialSynthetic Nylon
UseVideo Camera, Point & Shoot Cameras, Smartphones, Mirrorless System Camera
Image showing the tripod with a camera and a table of specifications including leg sections, max height, folded length, net weight, and load capacity.
Figure 10: Key specifications of the O234A1 Tripod.
Detailed view of the BH-28L ball head with its specifications like weight capacity, net weight, height, ball diameter, bottom connection, and material.
Figure 11: Detailed specifications of the BH-28L Ball Head.

8. User Tips

  • Quick Setup: The quick and powerful pull leg locks allow for rapid deployment and packing, making it ideal for on-the-go photography.
  • Versatile Angles: Experiment with the three types of leg angle adjustments to achieve unique perspectives and stability on various terrains.
  • Macro Photography: Don't forget to utilize the inverted central axis feature for stunning close-up shots of small subjects.
  • Smartphone Use: The included phone holder makes this tripod a versatile tool for mobile content creators, allowing for stable video recording and photography.

9. Warranty and Support

This K&F CONCEPT O234A1 Tripod comes with a 1-year warranty from the date of purchase. For any technical support, warranty claims, or inquiries, please contact K&F CONCEPT customer service through their official channels. Please retain your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.