NEJE A40630

Contents

NEJE A40630 Laser Module Kit

Instruction Manual

Brand: NEJE | Model: A40630

1. Introduction

The NEJE A40630 Laser Module Kit is a high-precision optical module designed for professional CNC laser engraving and cutting. With a 50W square spot and 450nm TTL, it is capable of engraving and cutting a wide range of materials, including metal and stainless steel. This module features a 2-in-1 focus design with an adjustable lens and fixed focal length, built-in protective glass for eye safety, and intelligent fan speed control based on laser temperature for quieter operation. It also includes a modified laser air assist to prevent smoke damage to the lens.

NEJE A40630 Laser Module Kit with Interface Adapter Board
NEJE A40630 Laser Module Kit, capable of engraving metal and stainless steel.

2. Safety Guidelines

  • Eye Protection: Always wear laser goggles during operation. Avoid direct exposure of eyes and skin to the laser beam.
  • Material Safety: Do not engrave mirror-like or reflective objects, as the laser can reflect and cause harm.
  • Fire Hazard: Pay close attention to potential fire hazards, especially when working with flammable materials.
  • Pet Safety: Keep pets away from the working area during operation.
  • Ventilation: Ensure adequate ventilation. Smoke will be generated during engraving and cutting; proper smoke exhaust is crucial for indoor use.
  • Unauthorized Disassembly: Do NOT dismantle the laser module without official permission. This can damage the module and void the warranty.

3. Package Contents

Verify that all items listed below are included in your package:

  • 1 x NEJE A40630 Laser Module (Built-in Metal Nozzle)
  • 1 x Sliding Card Slot
  • 1 x L Wrench
  • 1 x L-shaped Small Wrench
  • 1 x Interface Adapter Board
  • 1 x 4-pin Laser Line
  • 1 x 3-pin 2.54 Interface Output Cable
  • 1 x 2-pin TTL Control Line
  • 1 x Air Nozzle
  • Screws
  • 1 x 4mm PVC Trachea (1m)
  • Cable Ties
  • 1 x NEJE Module Manual
NEJE A40630 Package List
Visual representation of the NEJE A40630 Laser Module Kit package contents.

4. Specifications

FeatureSpecification
ModelNEJE Module (A40630)
Heatsink MaterialAircraft Aluminum + Brass Shell
Luminous ColorBlue
Section Size40mm x 40mm
Cooling ModeTemperature sensor intelligent control + 10000 rpm 40mm cooling fan
Dimension60 * 40 * 40mm
Adapter Plug5.5 2.1 port
Optical Power Output5.5W (5500mW)
Wavelength445-450nm
Beam ShapeDot (Focusable)
Working VoltageDC 12V
TTL&PWM ModulationYES, Compatible with Both TTL & PWM Modulation
Input VoltageDC12V 3A
PWM/TTL InputDC3.3V-12V
Input InterfacePH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
Drive ModeExternal ACC
Safe Temperature Range<60 ℃
Module Weight202g
Life Time10000-20,000 hours
CertificationCE, FCC, RoHS, UL
OriginMainland China
NEJE A40630 Module Internal Diagram
Diagram illustrating the internal components and intelligent features of the NEJE A40630 module, including TTL, fan speed, and temperature control.

5. Setup and Installation

5.1 Connecting the Module

The NEJE A40630 module supports various input interfaces for compatibility with different CNC equipment:

  • PH2.0-4Pin (+,-, PWM/TTL, Temperature)
  • 3Pin (+,-, PWM/TTL)
  • 2Pin+2Pin (+,-) + (PWM/TTL,-)

The temperature interface can be disconnected if not required. Ensure correct polarity and pin assignment when connecting to your control board.

5.2 Focus Adjustment

The module features a sliding slot for easy focus adjustment. The optimal focus distance is 17mm from the laser module to the material surface when the module is positioned 25mm above the material.

NEJE A40630 Focus with Air Assist Diagram
Diagram illustrating the recommended focus setup with air assist for the NEJE A40630 module.

5.3 Air Assist Setup

For optimal cutting performance and to prevent smoke damage to the lens, it is recommended to use air assist. The ideal air assist pressure is between 0.6-1.5 MPa.

5.4 Compatibility

This laser module is compatible with various CNC equipment, including 3D printers and CNC milling machines. However, users need to have a certain understanding of PWM waveform control for integration.

6. Operating Instructions

The NEJE A40630 module is designed for both engraving and cutting tasks. It offers a precise 0.04x0.04mm focus and can achieve a maximum cutting depth of 20mm with high verticality and clean edges.

High Precision Engraving Module Diagram
Detailed diagram of the NEJE A40630 module's engraving and cutting capabilities, highlighting focus and maximum cutting depth.

6.1 Supported Materials

The NEJE A40630 can engrave and cut a wide variety of materials:

  • Engravable/Cuttable: Metal, Stainless Steel, MDF, Balsa, Paper, Wood, Fabric, Plastic, Leather, Plywood, Foam Paper, Anodized Aluminum.
  • Not Engravable/Cuttable: Glass, Stone, Ceramics, PCB, Reflective Material, Transparent Material.
Hundreds of Materials for DIY Enjoyment
Examples of various materials that can be processed with the NEJE A40630 laser module.
Wood, Leather, Acrylic, Steel Carving and Cutting Examples
Visual examples of carving and cutting on wood, leather, acrylic, and steel.

6.2 Material Processing Capabilities

The following table outlines the module's capabilities for marking, craving (engraving), and cutting various materials:

NEJE A40630 Material Processing Table
Table detailing the marking, craving, and cutting capabilities of the NEJE A40630 for various materials.

The following table provides recommended cutting speeds for various materials and thicknesses. These values are guidelines and may require adjustment based on your specific setup and desired results. NOTE: The above data needs to add air assist correctly (0.6-1.5MPa) with LaserGRBL or Lightburn. For Lightburn: 60mm/min = 1mm/sec, S1000 = 100% Power.

NEJE A40630 Cutting Speed Table
Table of recommended cutting speeds for various materials and thicknesses.

6.4 Product Demonstration Video

Watch this video for a demonstration of the NEJE A40630 laser module in action, showcasing its engraving and cutting capabilities on different materials.

Demonstration of the NEJE A40630 laser module performing engraving and cutting tasks.

7. Maintenance

  • Lens Cleaning: Regularly inspect and clean the laser lens to ensure optimal performance and prevent smoke residue buildup. The air assist feature helps in keeping the lens clean during operation.
  • General Care: Keep the module free from dust and debris. Store in a clean, dry environment when not in use.
  • No Disassembly: Do not attempt to disassemble the laser module. Internal components are sensitive and can be damaged, voiding the warranty.

8. Troubleshooting

  • Performance Issues: If you experience any operational problems or reduced performance, first check all connections and ensure the module is properly focused.
  • Contact Support: For persistent issues, it is recommended to contact customer service. Many problems can be resolved by providing a video and detailed description of the issue.
  • Unauthorized Repairs: Do not attempt to repair the laser module yourself, as this can cause further damage and void the warranty.

9. User Tips

  • Aluminum Engraving: When engraving aluminum alloys, it is necessary to paint the surface black before laser processing to achieve visible results.
  • Connection Verification: If you are unsure about the 4-pin connection for your NEJE machine, refer to the manual or contact support to confirm compatibility and wiring.
  • Software Settings: Experiment with different cutting speeds and power settings in your software (e.g., LaserGRBL, Lightburn) to find the optimal parameters for various materials. Always start with lower power and speed settings and gradually increase.

10. Warranty and Support

The laser module comes with a one-year warranty. This warranty covers manufacturing defects but excludes damage caused by misuse, such as operating the laser module for more than 30 minutes continuously per session without adequate cooling or other individual situations leading to damage.

For any quality problems or technical assistance, please contact our customer service. Providing a video and a detailed description of your issue can help expedite the support process.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.