1. Introduction
The JIKONG Smart Active Balance Power Management System (BMS) is an intelligent protection board designed for large capacity series lithium battery packs. It integrates advanced features such as voltage acquisition, high-current active balancing, overcharge/overdischarge/overcurrent/overtemperature protection, coulomb metering, Bluetooth communication, and optional GPS functionality.
This BMS is compatible with various battery types, including lithium iron phosphate (LiFePO4), ternary lithium, and lithium titanate (LTO) batteries.
What is Active Balancing (Lossless Balancing)?
Active balancing is a technology that transfers energy from cells with higher energy levels to cells with lower energy levels. This process achieves voltage and current balance with minimal energy loss. Unlike passive balancing, active balancing does not generate significant heat, allowing for larger balancing currents (typically 0.4A to 2A) without affecting cooling. It operates continuously during charging, discharging, or idle states until the voltage difference between cells is within the set range. This makes it particularly suitable for larger capacity battery packs, improving battery consistency, extending range, and delaying battery aging.
The BMS features a mobile APP (Android and iOS compatible) for monitoring battery status, modifying parameters, and controlling charge/discharge switches via Bluetooth. Its compact size, ease of operation, and comprehensive functions make it ideal for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

2. Key Features
- Active Balancing: High current active balancing (0.4A) for optimal cell consistency and extended battery life.
- Multi-Interface Display: Supports APP, PC, and external display screens for comprehensive data monitoring.
- Communication: Bluetooth connectivity for mobile APP control. Optional RS485 and CAN communication interfaces.
- Protection Functions: Overcharge, overdischarge, overcurrent, short circuit, overtemperature, and low temperature protection.
- Monitoring: High precision voltage (±3mV) and current acquisition, battery capacity calculation, accurate time logging, and support for information screen display.
- Optional Functions: Heating function for low-temperature environments, GPS communication for location tracking, and parallel function for battery packs.
- Hardware: High-performance MCU (Main Control Unit) and full aluminum alloy shell for excellent heat dissipation and durability.

3. Specifications
The JIKONG BMS is available in various configurations, including 60A and 80A versions, supporting 4S-24S battery series. Below are the general specifications and default parameters.
3.1 General Specifications
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 20-100 | V |
| Operating Power Consumption | <800 | mW |
| Operating Temperature | -30 to 70 | °C |
| Maximum Number of Collection Strings | 24 | Strings |
| Maximum Balancing Current | 0.4 | A |
| Maximum Charging Current (60A model) | 60 | A |
| Maximum Discharge Current (60A model) | 60 | A |
| Maximum Instantaneous Current (60A model) | 120 | A |
| Maximum Internal Loop Resistance (60A model) | 1.53 | mΩ |
| Maximum Charging Current (80A model) | 80 | A |
| Maximum Discharge Current (80A model) | 80 | A |
| Maximum Instantaneous Current (80A model) | 150 | A |
| Maximum Internal Loop Resistance (80A model) | 1.2 | mΩ |
| Protection Board Size | 136 x 103 x 17.6 | mm |
| Finished Weight | 260 | g |
3.2 Default Parameters
| Parameter | Li-ion | LiFePO4 | LTO | Unit |
|---|---|---|---|---|
| Balancing Initial Voltage | 3 | 3 | 2 | V |
| Maximum Balancing Current | 0.4 | 0.4 | 0.4 | A |
| Unit Overcharge Voltage | 4.2 | 3.6 | 2.7 | V |
| Single Overcharge Protection Recovery | 4.18 | 3.55 | 2.65 | V |
| Monomer Undervoltage Protection | 2.82 | 2.6 | 1.8 | V |
| Single Undervoltage Protection Recovery | 2.85 | 2.65 | 1.85 | V |
| Automatic Shutdown Voltage | 2.8 | 2.5 | 1.7 | V |
| SOC-0% Voltage | 2.9 | 2.6 | 1.85 | V |
| SOC-100% Voltage | 4.18 | 3.5 | 2.65 | V |
| Trigger Balancing Differential Pressure | 0.01 | 0.01 | 0.01 | V |
| Charging Overcurrent Protection Delay | 30 | 30 | 30 | S |
| Charge Overcurrent Protection Release Time | 60 | 60 | 60 | S |
| Discharge Overcurrent Protection Delay | 300 | 300 | 300 | S |
| Discharge Overcurrent Protection Release Time | 60 | 60 | 60 | S |
| Short-circuit Protection Delay | 5 | 5 | 5 | µS |
| Short-circuit Protection Release Time | 30 | 30 | 30 | S |
| Charging Overtemperature Protection Temperature | 70 | 70 | 70 | °C |
| Charge Overtemperature Restore Temperature | 60 | 60 | 60 | °C |
| Discharge Overtemperature Protection Temperature | 70 | 70 | 70 | °C |
| Discharge Overtemperature Recovery Temperature | 60 | 60 | 60 | °C |
| Charging Low Temperature Protection Temperature | -20 | -20 | -20 | °C |
| Charge Low Temperature to Restore Temperature | -10 | -10 | -10 | °C |
| MOS Overtemperature Protection Temperature | 100 | 100 | 100 | °C |
| MOS Overtemperature Protection Recovery Temperature | 80 | 80 | 80 | °C |

4. Setup and Installation
The JIKONG BMS is designed for 7-24 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure all connections are secure and correct before powering on the BMS.
4.1 Package Contents
- BMS x 1
- Sampling cable (75cm) x 2
- Temperature sensor NTC (40cm) x 1
- Power switch button (50cm) x 1
- Bolt screws (2-6 pieces, depending on model)
- Exclusive packaging box x 1

4.2 Wiring Instructions
- Connect all the balance cables to the battery cells, ensuring correct polarity and sequence.
- Insert the balance cable connector into the corresponding port on the BMS.
- Connect the B- line (total negative battery terminal) and the P- line (load/charger negative terminal) to the battery and external components respectively.
- For models with heating function, connect the heating element and temperature control switch as per the wiring diagram.
It is crucial to verify that the balance cable is properly connected and that the P- and B- lines are correctly wired. Ensure the BMS is securely fixed to the battery pack. Incorrect wiring can lead to abnormal operation or damage to the unit.


5. Operating Instructions
5.1 Device Activation
After ensuring all wiring is correct and secure, power on the protection board. The BMS is designed for charging activation mode: connect a charger (with voltage 2V higher than battery voltage) to activate the BMS. Alternatively, if you have an optional display screen and button, insert the cable into the display interface and press the button to activate.
5.2 Mobile APP Installation and Usage
The JIKONG BMS can be controlled and monitored via a mobile application. To install the APP:
- Scan the QR code below to download the mobile APP. Android devices require Android 7 or higher.
- For iOS, search for "JK BMS" in the APP Store. For Android, search for "JK BMS" in the Google Play Store.

Once installed, connect to the BMS via Bluetooth to view battery status, modify working parameters, and control charge/discharge switches. The APP supports multiple languages and can switch automatically with your phone's system settings.

5.3 Parameter Settings
Parameters such as balance trigger differential pressure, overcharge/undervoltage protection thresholds, and overcurrent delays can be adjusted via the mobile APP or PC software. Refer to the detailed "Instructions for Setting Protection Board Parameters" in the full PDF manual for comprehensive guidance.

5.4 Communication Functions (Optional)
The BMS supports optional CAN and RS485 communication functions. If these are selected, you can configure the address and communication protocol according to your system requirements. Specific communication protocols are detailed in the JIKONG Protection Board communication protocol document.

5.5 Product Overview Video
Video 1: A brief overview of the JIKONG Smart BMS and its features.
6. Maintenance and Protection Functions
The JIKONG BMS is equipped with various protection mechanisms to ensure the safety and longevity of your battery pack. These functions are configurable via the mobile APP.
6.1 Overvoltage Protection (Charge)
The BMS provides standard charge overvoltage protection. If any cell's voltage exceeds the set overcharge protection voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the overcharge recovery voltage.
6.2 Undervoltage Protection (Discharge)
Standard discharge undervoltage protection is included. If any cell's voltage falls below the set undervoltage protection voltage during discharge, the BMS will trigger protection and stop discharging. Discharge resumes when all cell voltages rise above the undervoltage recovery voltage. If any cell voltage drops below the automatic shutdown voltage, the BMS will shut down to protect the battery.
6.3 Overcurrent Protection (Charge & Discharge)
The BMS features standard charge and discharge overcurrent protection. If the charging or discharging current exceeds the set continuous current for a specified delay time, the BMS will trigger protection and stop the respective operation. The operation resumes after the overcurrent release time. Note: The maximum continuous discharge current should not exceed the design value (60A/80A).
6.4 Overtemperature Protection (Charge & Discharge)
Standard charge and discharge overtemperature protection is provided. If the BMS detects a temperature above the set overtemperature protection value, it will stop the corresponding operation. Operation resumes when the temperature drops below the recovery temperature.6.5 Low Temperature Protection (Charge)
Standard charge low temperature protection is included. If the temperature falls below the set low temperature protection value during charging, the BMS will stop charging. Charging resumes when the temperature rises above the recovery temperature. For extremely cold environments, using the optional heating function is recommended.
6.6 Short Circuit Protection
The BMS includes standard short circuit protection. While the trigger current is not user-adjustable, the short circuit protection delay and recovery time can be configured via the APP. If a short circuit occurs, the BMS will stop the operation and resume after the recovery time. If short circuit protection is triggered upon initial connection of a charger or load, consider increasing the delay time to account for high instantaneous peak currents from connected devices.6.7 Emergency Switch
The emergency switch function allows the BMS to force charge and discharge for 30 minutes in critical situations (e.g., over-temperature, over-discharge, over-charge, cell drop). This provides a temporary operational window to prevent dangerous situations like being stranded.
6.8 Intelligent Sleep
The intelligent sleep function puts the BMS into a low-power standby mode if the charge/discharge current is less than 1A for 26 consecutive hours, reducing self-consumption. The BMS can be reactivated by pressing a button or connecting a charger.
7. Troubleshooting
- BMS Not Powering On: Ensure all balance cables are correctly connected and P-/B- lines are secure. Activate the BMS by connecting a charger (voltage 2V higher than battery) or by using the optional display/button.
- Alarms Triggering: Check the mobile APP for specific alarm details (overtemperature, overcharge, overdischarge, etc.). Verify battery parameters and environmental conditions.
- Short Circuit Protection Triggered: Inspect external wiring for actual short circuits. If no physical short circuit is found, consider increasing the short circuit protection delay in the APP, especially if connecting high-current chargers or loads that might cause high instantaneous peak currents.
- Balancing Issues: Ensure the active balancing function is enabled in the APP and that the balance trigger differential pressure is set appropriately.
- Communication Problems: Verify Bluetooth connection. If using optional CAN/RS485, check wiring and protocol settings in the APP.
8. User Tips
- Secure Connections: Always ensure all wiring, especially balance cables and main power lines, are securely connected for optimal performance and safety.
- Utilize the APP: The mobile APP offers extensive configuration and monitoring capabilities. Take advantage of it to customize parameters and keep track of your battery's health.
- Parameter Configuration: The BMS is highly configurable. Adjust parameters like protection thresholds and delays to match your specific battery type and application needs.
- Prompt Support: If you encounter any non-functional conditions or persistent issues, contact customer support promptly for assistance.
9. Warranty and Support
For comprehensive details regarding warranty, service, and advanced configurations, please refer to the official user manual PDF. This document provides in-depth information on all aspects of the JIKONG BMS.
Official User Manual (PDF): Download PDF User Manual
For accessories and further support, please visit the JIKONG BMS Flagship Store.
