JIKONG JK-BD6A24S10P

Contents

JIKONG JK-BD6A24S10P Smart Active Balance BMS User Manual

Model: JK-BD6A24S10P

1. Introduction

The JIKONG JK-BD6A24S10P is an intelligent active balanced Battery Management System (BMS) designed for a wide range of battery applications. It supports 8S-24S series Li-ion, LiFePO4, and LTO batteries, offering robust protection and precise management. This smart BMS features a 100A continuous charge/discharge current, active balancing, and multiple communication interfaces including Bluetooth, RS485, and CANBUS. It allows for comprehensive monitoring and parameter adjustment via mobile app, PC software, or an external display, ensuring optimal battery performance and longevity.

JIKONG BMS JK-BD6A24S10P overview with key features
Figure 1: JIKONG JK-BD6A24S10P BMS with key features highlighted.

2. Specifications

The following table details the technical specifications for the JIKONG JK-BD6A24S10P BMS:

Technical IndexSpecification (JK-BD6A24S10P)
Number of Battery Strings (Li-ion/LTO)7S-20S
Number of Battery Strings (LiFePo4)8S-24S
Balance MethodActive Balance (Full State On)
Balance Current0.6A
Conductive Resistance in Main Circuit1mΩ
Continuous Discharge Current100A
Continuous Charge Current100A
Maximum Discharge Current (MAX 2min)200A
Over Charge Protection Current (A)10-100A
Other Interfaces (Default)RS485
Other Interfaces (Customized)CANBUS, HEAT
Size (L*W*H)162mm * 102mm * 20mm
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Detection Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection3Pcs
Temperature ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS phone
CertificationCE
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
Product dimension specifications
Figure 2: Product dimensions (Note: Data tolerance range is ±2mm).

3. Package Contents

Verify that all items are present in your package:

  • 1 x JIKONG Smart Active Balance BMS (JK-BD6A24S10P)
  • 1 x NTC Temperature Sensor (40cm long)
  • 1 x Sampling Line B (70cm long)
  • 1 x Sampling Line A (70cm long)
Packing List image showing BMS and included cables
Figure 3: Contents of the package.

4. Setup and Installation

Careful installation is crucial for the safe and proper operation of your BMS. Please follow these steps:

4.1. General Wiring Steps

  1. Ensure all battery cells are balanced and at a safe voltage before connecting the BMS.
  2. Connect all balance (sampling) cables to their respective battery cells, starting from B- (negative) to the highest positive cell.
  3. Insert the balance cable connector into the BMS port.
  4. Connect the main B- line from the battery pack's total negative terminal to the B- terminal on the BMS.
  5. Connect the main P- line from the load/charger negative terminal to the P- terminal on the BMS.
  6. Connect the main positive line from the battery pack's total positive terminal directly to the load/charger positive terminal.
  7. Connect the NTC temperature sensors to the battery cells and plug them into the BMS.

4.2. Wiring Diagrams

Refer to the following diagrams for detailed wiring instructions for common battery configurations:

Wiring diagram for a 24-string battery cell configuration
Figure 4: Wiring method for 24-string cells. This diagram illustrates the connection of individual cell voltage sensing wires (B1-B24), NTC temperature sensors, and main power lines (B- and P-) to the BMS, and then to the total negative and positive electrodes of the battery pack, as well as connections to the motor, inverter, and charger.
Wiring diagram for a 16-string battery cell configuration
Figure 5: Wiring method for 16-string cells. Similar to the 24-string diagram, this shows the connections for a 16-cell battery pack, including balance wires, NTC, and main power lines.

4.3. Interface Overview

The BMS provides a rich set of interfaces to meet various daily needs, allowing RS485/CAN communication modes to be realized simultaneously through different interfaces.

Diagram of BMS interfaces including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer
Figure 6: BMS interface diagram, showing ports for CAN/RS485, NTC, GPS, Display/Switch, and Heating.

5. Operating Instructions

The JIKONG JK-BD6A24S10P BMS offers multiple ways to monitor and interact with your battery system.

5.1. Mobile APP (JIKONG SMART BMS)

The dedicated mobile application, "JIKONG SMART BMS," provides a personal lithium battery steward experience. It supports iOS, Android, and HarmonyOS systems and multiple languages. With the app, you can view real-time information such as:

  • Voltage (total and individual cell)
  • Current (charge/discharge)
  • Temperature (from NTC sensors)
  • State of Charge (SOC)
  • Alarms and protection status
  • Cycle count

The app also allows for intelligent interaction, enabling you to freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings. Always read the internal parameters of the protection board first before making changes.

Screenshot of the JIKONG SMART BMS mobile application interface
Figure 7: Mobile APP interface displaying various battery parameters.

5.2. PC Software

For more detailed monitoring and configuration, the BMS can be connected to a computer via PC software. This allows you to view multiple information points like voltage, current, temperature, and number of strings on a larger display. The PC software also supports setting inverter communication protocols.

Screenshot of the JIKONG BMS PC software interface
Figure 8: PC software interface for monitoring and control.

5.3. External Display

A dedicated JIKONG home storage display can be used to view key battery parameters without needing a mobile device or PC.

JIKONG home storage dedicated display showing battery status
Figure 9: JIKONG home storage dedicated display.

5.4. Protocol Docking

The BMS is compatible with mainstream inverter communication protocols in the market. You can easily set up the desired protocol through the mobile app or PC software.

Protocol NameDescription
Low-voltage hybrid inverter CAN communication protocolGeneral CAN protocol for low-voltage hybrid inverters.
PYLON CANBUS Protocol V1.2Specific protocol for Pylontech CANBUS systems.
Growatt xxSxxP ESS Protocol V2.01Specific protocol for Growatt Energy Storage Systems.
CAB-BUS_BMS_Protocol_201707CAB-BUS BMS protocol.
INVT BMS CAN Bus protocol V1.02Specific protocol for INVT BMS CAN Bus systems.
GoodWe LV BMS Protocol (CAN) V1.7(For ES/BMS-BP/BP Series)Specific protocol for GoodWe Low Voltage BMS.
FSS-ConnectingBat-TI-en-10 | Version 1.0FSS battery connection protocol.
PACE BMS Modbus Protocol for RS485Modbus protocol for RS485 communication with PACE BMS.
Mobile app interface showing CAN protocol selection options
Figure 10: Mobile app interface for selecting CAN protocols.

6. Maintenance

The JIKONG JK-BD6A24S10P BMS is designed for durability and high performance with minimal maintenance.

6.1. Physical Durability

The BMS features a fully enclosed aluminum alloy shell, providing effective dustproof and waterproof capabilities. This design reduces the risk of damage from external environmental factors and absorbs vibration, protecting internal electronic components.

Image demonstrating the dustproof and waterproof features of the BMS
Figure 11: Dustproof and waterproof design for enhanced durability.

6.2. Heat Dissipation

The casing is made of aluminum alloy and adopts one-piece molding technology, ensuring superior heat dissipation. This high thermal conductivity (less than 300 W/(m·K)) helps maintain optimal operating temperatures for the internal components, contributing to the BMS's reliability and lifespan.

Exploded view of BMS showing aluminum alloy casing for heat dissipation
Figure 12: Fully aluminum alloy shell for excellent heat dissipation.

6.3. Active Balancing

The intelligent active balancing technology, a national patented feature, ensures efficient cell voltage difference balancing. This leads to a longer battery lifespan, more stable performance, and increased reliability of your battery pack.

Diagram illustrating the active balancing technology within a battery pack
Figure 13: Active balancing technology for enhanced battery life and stability.

7. Troubleshooting

If you encounter issues with your JIKONG JK-BD6A24S10P BMS, consider the following common troubleshooting steps:

  • No Power/No Display: Check all main power connections (B- and P-) to ensure they are secure and correctly wired. Verify the battery pack voltage is within the operational range.
  • Incorrect Cell Voltage Readings: Ensure all balance (sampling) wires are correctly connected to their respective cells and are fully inserted into the BMS connector. Check for any damaged or loose wires.
  • Overcharge/Overdischarge Protection Triggered: Review your battery's specifications and the BMS's configured protection parameters via the mobile app or PC software. Adjust settings if necessary, ensuring they align with your battery's safe operating limits.
  • Overcurrent Protection Triggered: This indicates that the load current exceeded the BMS's continuous or peak current rating. Reduce the load or ensure your system's current draw is within the BMS's capabilities. Check for any short circuits in the load.
  • Temperature Protection Triggered: Ensure NTC sensors are correctly placed on the battery cells and are not damaged. Verify ambient temperature is within the battery's safe operating range. Improve ventilation if necessary.
  • Bluetooth Connection Issues: Ensure the BMS is powered on. Check your mobile device's Bluetooth settings and ensure it's discoverable. Try restarting both the BMS (by disconnecting and reconnecting power) and your mobile device.
  • CAN/RS485 Communication Failure: Verify physical connections for the communication cables. Check the selected protocol in the mobile app or PC software matches your inverter/device. Consult the inverter's manual for compatible protocols.

For persistent issues, refer to the detailed diagnostics available through the JIKONG SMART BMS app or PC software, which can provide specific error codes or status indicators.

8. User Tips

  • Double-Check Wiring: Always meticulously verify all wiring connections, especially the balance leads and main power cables, before applying power. Incorrect wiring is a common cause of issues.
  • Monitor Regularly: Utilize the mobile app or PC software to regularly monitor your battery's health, including cell voltages, temperatures, and overall state of charge. This proactive monitoring can help identify potential problems early.
  • Parameter Adjustment: When adjusting protection parameters, do so cautiously and in small increments. Always understand the implications of each setting on your battery's safety and performance. Refer to your battery cell manufacturer's specifications.
  • Firmware Updates: Check the official JIKONG website or app for any available firmware updates for your BMS. Updates can improve performance, add features, or fix bugs.
  • Environmental Considerations: While the BMS is dustproof and waterproof, avoid exposing it to extreme temperatures or direct, prolonged moisture to ensure its longevity.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the JIKONG Official Store or your authorized reseller. Ensure you have your product model number (JK-BD6A24S10P) and purchase details available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.