K&F CONCEPT Ms13

Contents

K&F CONCEPT Multi-Functional Super Clamp with Double 360° Ball Head Magic Arm

Model: Ms13

Introduction

Thank you for choosing the K&F CONCEPT Multi-Functional Super Clamp with Double 360° Ball Head Magic Arm. This versatile accessory is designed to provide flexible and secure mounting solutions for various photographic and video equipment, including cameras, action cameras, smartphones, lights, and monitors. Its robust aluminum construction and thoughtful design ensure stability and adaptability for diverse shooting environments.

Package Contents

Please check the package to ensure all items are present. The specific components may vary based on the set purchased (Optional sets are available).

  • Super Clamp
  • Magic Arm (Double 360° Ball Head)
  • GoPro Interface
  • Cell Phone Clip
  • Screwdriver

Video: K&F CONCEPT Multi-functional Super Clamp with Magic Arm - Product overview and unboxing.

K&F CONCEPT Super Clamp and Magic Arm components

Image: Overview of the Super Clamp and Magic Arm components.

Key Features

  • High Load Capacity: Supports equipment up to 5kg (11 lbs).
  • Wide Jaw Opening: The Super Clamp can open up to 60mm, accommodating various surfaces like railings, tabletops, and poles.
  • Versatile Mounting Points: Features multiple 1/4" screw holes and ARRI positioning holes for attaching a wide range of accessories.
  • 360° Rotation Ball Heads: The Magic Arm is equipped with two 360° rotatable ball heads, allowing for flexible positioning and angle adjustments.
  • Modular Design: The Super Clamp and Magic Arm can be used together or separately, offering enhanced creative possibilities.
  • Secure Grip: Non-slip rubber pads on the clamp jaws ensure a tight and stable grip, preventing accidental slips or damage to surfaces.
  • Durable Construction: Made from high-quality aluminum for long-lasting performance.

Setup and Assembly

1. Using the Super Clamp

  1. Open the Clamp: Rotate the orange knob counter-clockwise to open the clamp jaws. The maximum opening is 60mm.
  2. Position the Clamp: Place the clamp onto the desired surface (e.g., table edge, pole, railing).
  3. Secure the Clamp: Rotate the orange knob clockwise to tighten the clamp jaws firmly onto the surface. Ensure it is securely fastened before attaching any equipment.
Super Clamp with 1/4 inch thread and mounting options

Image: Super Clamp showing 1/4" thread and compatibility with Magic Arm.

Close-up of non-slip rubber pad on Super Clamp

Image: Detail of the non-slip rubber pad for secure clamping.

2. Using the Magic Arm

  1. Attach to Equipment: The Magic Arm features 1/4" screws on both ends. Screw one end into your camera, monitor, or other accessory.
  2. Attach to Mount: Screw the other end of the Magic Arm into a compatible mount, such as the Super Clamp, a tripod, or a cage with 1/4" screw holes or ARRI positioning holes.
  3. Adjust Angle: Loosen the central orange knob to adjust the angle of the two ball heads. Tighten the knob to lock the position.
Magic Arm with 360 degree rotation ball heads

Image: Magic Arm demonstrating 360° rotation ball heads.

3. Combining Super Clamp and Magic Arm

  1. Attach the Magic Arm to one of the 1/4" screw holes on the Super Clamp.
  2. Securely tighten the connection.
  3. Attach your device to the other end of the Magic Arm.
Diagram of Super Clamp and Magic Arm components and assembly

Image: Diagram showing the components and how the Super Clamp and Magic Arm connect.

4. Attaching Accessories

  • GoPro Interface: Use the provided GoPro interface to mount action cameras.
  • Cell Phone Clip: Attach the cell phone clip to the Magic Arm's 1/4" screw to mount smartphones.

Operating Instructions

Once assembled and securely mounted, the K&F CONCEPT Super Clamp and Magic Arm offer flexible operation:

  • Angle Adjustment: Loosen the central orange knob on the Magic Arm to freely adjust the angle and orientation of your attached device. Once the desired position is achieved, tighten the knob firmly to lock it in place.
  • Rotation: The 360° ball heads allow for full rotation, enabling you to switch between horizontal and vertical orientations or any angle in between.
  • Multi-Scenario Usage: The clamp can be mounted on various objects up to 60mm thick, including railings, tripods, tabletops, tree branches, and bicycle handlebars, providing diverse shooting perspectives.
Various applications of the Super Clamp and Magic Arm

Image: Examples of the Super Clamp and Magic Arm in various photographic setups.

Camera mounted on a railing using the Super Clamp and Magic Arm

Image: Camera mounted on a railing, demonstrating the 360° rotation capability.

Maintenance

  • Cleaning: Wipe the product with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.
  • Storage: Store the clamp and arm in a dry, clean environment away from extreme temperatures and humidity.
  • Inspection: Periodically check all screws and moving parts for tightness. Re-tighten if necessary to ensure safe operation.
  • Lubrication: The ball heads are designed for smooth operation. Avoid applying lubricants unless specifically recommended by the manufacturer, as this could attract dust and debris.

Troubleshooting

Issue: Clamp is not holding securely.

  • Solution: Ensure the orange knob is fully tightened. Check that the surface you are clamping to is within the 60mm maximum jaw opening and is not too thin or irregularly shaped. The non-slip rubber pads should make full contact with the surface.

Issue: Magic Arm ball heads are loose or difficult to adjust.

  • Solution: Ensure the central orange knob on the Magic Arm is properly tightened to secure the ball heads. If it's difficult to adjust, ensure it's not overtightened.

Issue: Device attached to Magic Arm is wobbly.

  • Solution: Verify that the 1/4" screw connection between the device and the Magic Arm is fully tightened. Also, ensure the Magic Arm's central knob is securely locked.

Specifications

Feature Specification
Brand Name K&F CONCEPT
Model Number Ms13
Material Aluminum
Load Capacity Up to 5kg
Max Clamp Jaw Opening 60mm
Mounting Threads 1/4"-20 standard, ARRI positioning holes
Magic Arm Rotation Double 360° Ball Heads
Super Clamp Weight Approx. 125g
Magic Arm Weight Approx. 110g
Super Clamp Dimensions (L x W x H) 72mm x 83mm x 20mm (approx.)
Super Clamp holding a camera, showing 5kg load capacity

Image: Super Clamp demonstrating its 5kg load capacity.

Super Clamp showing 60mm maximum opening

Image: Super Clamp illustrating its 60mm maximum jaw opening.

Magic Arm with dual 1/4 inch screws and ARRI positioning holes

Image: Magic Arm highlighting its universal dual 1/4" screws and ARRI positioning holes.

User Tips

  • Check Compatibility: Before purchasing, confirm if you need the Super Clamp, Magic Arm, or both, as they are available as optional sets.
  • Secure Tightening: Always ensure the orange knobs on both the Super Clamp and Magic Arm are tightened firmly to prevent any movement or accidental drops of your valuable equipment.
  • Surface Protection: The non-slip rubber pads are designed to protect surfaces, but for delicate finishes, consider adding extra padding.
  • Weight Distribution: When mounting heavier equipment, try to balance the weight as much as possible to reduce strain on the clamp and arm.

Warranty and Support

This K&F CONCEPT product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact K&F CONCEPT customer service through their official website or the retailer where you purchased the product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.