1. Product Overview
The GuliKit KK3 MAX Controller is a versatile gamepad designed for a superior gaming experience across multiple platforms. It features advanced Hall Effect joysticks and triggers, a patented Maglev Vibration Motor, and a high polling rate for responsive control. This manual provides detailed instructions for setup, operation, and maintenance.

Figure 1: GuliKit KK3 MAX Controller with Carrying Case

Figure 2: GuliKit KK3 MAX Controller and included accessories
Video 1: Official product video showcasing the GuliKit KK3 MAX Controller's features and design.
2. Setup and Initial Use
2.1. Power On/Off
- Power On: Press any of the A, B, X, Y, Home, or Mode buttons.
- Power Off: Long-press the Mode button. The controller will also automatically power off after 10 minutes of inactivity (except when using full-auto Continuous Fire or Auto Pilot Gaming).
2.2. Calibration
2.2.1. Gyroscope Calibration
In the power-on state, place the controller on a flat surface. Simultaneously press the +, -, D-pad Left, and A buttons. The controller will vibrate once upon completion of the automatic calibration. Calibration is only necessary if the gyroscope is not functioning normally.2.2.2. Joysticks, ZL & ZR Triggers Calibration
To enter calibration mode, simultaneously press the L, R, D-pad Left, and A buttons for 6 seconds while the controller is powered on. During calibration, move both the left and right joysticks in complete circles 2-3 times. The calibrated joystick's light ring will turn green when its calibration is complete. The controller will automatically exit calibration mode once both joysticks' light rings are green.

Figure 3: Next Generation Hall Effect Electromagnetic Joystick with 2200 levels of 12-bit high-precision sampling.

Figure 4: The controller features two Hall Effect Joysticks.

Figure 5: The controller features two Hall Effect Analog Triggers.
2.3. Pairing Methods
2.3.1. PC Pairing (Windows)
- Bluetooth Pairing (125Hz Polling Rate):
- Switch the controller to PC mode. Long-press the SYNC button for 2 seconds until the indicator light scrolls.
- On your PC, go to Bluetooth settings, add a device, and select "GuliKit Controller".
- The interface will display "Connected" upon successful pairing.
- Wired Connection (1000Hz Polling Rate):
- Set the controller to PC mode.
- Connect the provided USB-C cable to the controller and a USB-A port on your computer. For desktops, use a rear USB port for stability.
- Using PC Exclusive KK3 "Hyperlink" Adapter (1000Hz Polling Rate):
- Set the controller to PC mode. Hold the SYNC button for 2 seconds until the indicator light scrolls.
- Insert the Hyperlink adapter into a PC USB port. Press the pairing button on the adapter once; its light will flash quickly.
- Both controller and adapter indicator lights will become solid, indicating successful pairing.

Figure 6: GuliKit Patented "Hyperlink" Adapter for wireless 1000Hz Polling Rate.

Figure 7: Comparison of 1000Hz (Super Response) wireless connection with Hyperlink Adapter vs. 125Hz (Slow Response) Bluetooth.
2.3.2. Nintendo Switch Pairing
- Method 1 (Wireless):
- On the Switch, navigate to the "Controllers" menu and select "Change Grip/Order".
- Set the controller to Switch mode. Long-press the SYNC button for 2 seconds until the indicator light scrolls.
- The Switch interface will display connection to the new controller upon successful pairing.
- Method 2 (Wired/Initial Wired Pairing):
- Set the controller to Switch mode.
- Connect the provided USB-C cable to the controller and a USB-A port on the Switch dock.
- Place the Switch console on the dock. The controller will automatically pair.
- Once paired, you can unplug the cable for wireless use or keep it connected for wired mode.
2.3.3. Android, iOS, and macOS Pairing
The controller supports Android, iOS, and macOS devices.
- Double-click the Mode button to switch to Android/iOS mode.
- Hold the SYNC button for 2 seconds until the indicator light scrolls.
- On your device, go to Bluetooth settings, enable Bluetooth, and search for devices.
- Select the "Xbox Wireless Controller" from the list.
- The interface will display "Connected" upon successful pairing.

Figure 8: The GuliKit KK3 MAX Controller offers true multi-platform support for Windows, Switch, Android, and iOS.
3. Operation and Advanced Features
All special function settings require holding down the Setting button (Gear icon button) while pressing the corresponding buttons for configuration. All special settings are automatically saved. The logo light will be blue when special settings are configured, and white when no special settings are configured.
3.1. Auto Pilot Gaming (APG) Function
The APG function allows recording and repeating custom commands or macros using the APG button (Double-Square icon button).
- Recording: Hold the APG button for 3 seconds until a short vibration. All subsequent button presses and joystick movements will be recorded. Press the APG button again or wait 10 minutes for recording to stop (long vibration indicates completion). Maximum recording time is 10 minutes.
- Replay: Press the APG button once briefly to repeat recorded actions once. Double-click the APG button to continuously repeat actions until interrupted. During replay, joysticks can be used for movement. To cancel replay, press any button except the joysticks.

Figure 9: Upgraded Auto-Pilot Gaming (APG) functionality for recording and playback.
3.2. Back Button Configuration
The controller features 4 metal rear paddles (G1, G2, G3, G4) that are detachable, swappable, and remappable.
- Mapping: Hold the Setting button (Gear icon) along with the desired back button. A short vibration indicates mapping has started. Press the button you wish to assign. A long vibration confirms mapping completion.
- Cancellation: Hold the Setting button (Gear icon) along with the back button you want to unmap. A long vibration confirms cancellation.
Note: Back buttons only support normal key functions and do not support Continuous Fire.

Figure 10: The 4 Metal Rear Paddles are detachable, swappable, and remappable for personalized control.
3.3. Trigger Mode Setting (Smartrigger Technology)
Toggle the switch on the back of the controller to switch between digital tactile switch trigger mode and Hall effect analog trigger mode for ZL and ZR triggers.
Note: Ensure triggers are released before switching modes.

Figure 11: Patented "Smartrigger" Technology allows quick switching between analog and digital triggers for different game types.
3.4. Special Settings
- Motion Aim Assist (PC FPS Games):
PressSetting + LorSetting + ZL.- One vibration: Low sensitivity aim assist.
- Two vibrations: Medium sensitivity aim assist.
- Three vibrations: High sensitivity aim assist.
- Long vibration: Disable motion aim assist (default).
Setting + Lactivates when L button is held.Setting + ZLactivates when ZL trigger is held.
Figure 12: Patented Motion Aim Assist provides faster aiming in competitive play.
- Joystick Dead Zone Mode:
PressSetting + Joystick (R3 or L3).- One vibration: Dead Zone mode enabled for the joystick center area.
- Long vibration: Cancel and restore to default (No Dead Zone mode).
- Adjust Joystick Sensitivity:
PressSetting + R3orSetting + L3. Each joystick can be configured individually.- One vibration: Sensitivity 50% (joystick ring in red).
- Two vibrations: Sensitivity 100% (joystick ring in blue, default).
- Three vibrations: Sensitivity 150% (joystick ring in green).

Figure 13: Adjustable Joystick Sensitivity with three modes to meet different gaming needs.
- Star Ring Lighting Effects:
PressSetting + Star icon. Cycles through: Default steady on, Joystick-activated flowing light, Vibration-activated light, Trigger-activated flowing light, Off. - Set 4-direction on D-pad:
PressSetting + D-pad Up.- One vibration: D-pad switches to 4-direction mode.
- Long vibration: Restores default 8-direction mode.

Figure 14: Adjustable D-Pad supports switching between 8-direction and 4-direction modes to prevent ghosting in FPS games.
- Continuous Fire (Turbo):
PressSetting + A/B/X/Y/L/R/ZL/ZR.- One Vibration: Normal Continuous Fire (active when held, stops when released).
- Two Vibrations: Auto Continuous Fire (press once to start, press again to stop).
- Long vibration: Cancel Continuous Fire (default).
- A-B X-Y Swap:
PressSetting + Home.- One vibration: Swaps input values of A-B and X-Y buttons.
- Long vibration: Restores default button assignments.
- Adjust Vibration Intensity:
PressSetting + Vibration icon.- One vibration: Weak vibration.
- Two vibrations: Standard vibration (default).
- Three vibrations: Strong vibration.
- Long vibration: Turn off vibration.
- Adjust Vibration Mode:
PressSetting + Vibration icon(repeatedly after intensity setting).- One vibration: Rotary motor mode.
- Two vibrations: GuliKit Maglev haptic mode (default).
- Three vibrations: HD vibration mode.

Figure 15: GuliKit Patented Maglev Vibration Motor offers superior frequency, responsiveness, and strength compared to other vibration types.
- APG Recording File Share:
PressSetting + APG button. This enters APG read/write mode. Connect the USB data cable to your computer. A USB drive named "GuliKit dat" will appear. The "Auto.apg" file can be copied for backup or replaced with a new APG file. The controller will automatically power off once writing is complete.
3.5. Reset to Factory Settings
To clear all settings and restore the controller to its factory defaults, press Setting + A + B + X + Y + R + L + ZL + ZR. A long vibration indicates the reset is complete.
4. Maintenance
4.1. Cleaning and Storage
- Wipe the controller with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the controller is fully charged before storage to preserve battery health.
4.2. Battery Information
The controller is equipped with a 950mAh Li-Polymer battery.
- With joystick lights off and Turbo on settings, the battery can last for approximately 28 hours.
- With low joystick lights and Turbo on settings, the battery can last for approximately 15 hours.
Note: In games with vibration features, battery life will be reduced based on the intensity and frequency of vibrations.

Figure 16: Battery life estimates for the 950mAh Li-Polymer battery under different usage conditions.
4.3. Charging Indicator
- During charging, the charging indicator light will be orange.
- When fully charged, the indicator light will turn green.
- When the battery is low, the logo light will flash, and the vibration function will automatically turn off. Vibration will resume when the battery level is restored.
5. Troubleshooting
If you encounter any issues with your GuliKit KK3 MAX Controller, please refer to the following common solutions:
- Connection Issues: Ensure the controller is in the correct mode (PC, Switch, Android/iOS) for your device. Re-attempt the pairing process. For wired connections, ensure the cable is securely connected.
- Unresponsive Buttons/Joysticks: Try calibrating the joysticks and triggers as described in Section 2.2.2. If issues persist, perform a factory reset (Section 3.5).
- Gyroscope Malfunction: Perform gyroscope calibration as described in Section 2.2.1.
- Vibration Issues: Check the vibration intensity and mode settings (Section 3.4). Ensure the battery is not low, as vibration may be disabled to conserve power.
- APG Function Not Working: Ensure the recording process was completed correctly (long vibration). Check the APG recording file via PC if necessary (Section 3.4).
For more questions and answers, you can visit the official GuliKit website and navigate to the "Support" section for "Frequently Asked Questions" (FAQ) related to the controller: www.gulikit.com
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | GuliKit KK3 MAX Controller (NS39) |
| Compatible Platform | Nintendo Switch, PC, Android, iOS, Steam, Raspberry Pi |
| Interface Type | USB, Bluetooth, 2.4G |
| Joystick Sensor Module Brand/Type | GuliKit / Hall Effect |
| Trigger Button Type | Hall-Linear (Patented "Smartrigger" technology for analog/digital switch) |
| Battery | 950mAh Li-Polymer (Included) |
| Polling Rate | 1000Hz (Wired & 2.4G Hyperlink Adapter), 125Hz (Bluetooth) |
| Joystick Precision | 2200 levels 12-bit high-precision sampling |
| Buttons | Second-Generation Tactile Buttons, Replaceable Button Caps |
| Rear Paddles | 4 Metal, Detachable, Swappable, Remappable (6 metal rear paddles offered) |
| Vibration | Patented Maglev Vibration Motor (HD Rumble, Maglev Super Haptic, Rotor Vibration modes) |
| Gyroscope | Six-Axis Gyroscope |
| APG Function | Auto-Pilot Gaming (Recording & Playback) |
| D-Pad | Adjustable 4-way/8-way mode |
| Ergonomics | Advanced Polymer Surface Treatment, Non-Slip Grips |
| Certification | CE |
| Origin | Mainland China |

Figure 17: Feature comparison table for GuliKit KingKong 3, KingKong 3 Pro, and KingKong 3 Max.

Figure 18: Performance comparison highlighting GuliKit KK3 MAX's superior polling rate and joystick precision.
7. Warranty and Support
For warranty information, technical support, and further assistance, please visit the official GuliKit website:
You may also find a detailed user manual in PDF format for additional guidance: GuliKit KK3 MAX User Manual (PDF)
8. User Tips
- Optimize Responsiveness: For competitive gaming on PC, utilize the GuliKit Hyperlink Adapter to achieve the full 1000Hz polling rate for lightning-fast response and super low delay.
- Personalize Control: Experiment with the adjustable joystick sensitivity and D-pad modes to find the settings that best suit your playstyle and game genre.
- Leverage Rear Paddles: Customize the detachable and remappable rear paddles for quick access to frequently used commands, enhancing your in-game efficiency.
- Smartrigger Advantage: Switch between analog and digital trigger modes using the patented Smartrigger technology to match the demands of different games, from precise racing to rapid-fire shooters.
- Explore APG: Use the Auto Pilot Gaming function to record and replay complex button sequences, which can be beneficial for repetitive tasks or executing intricate combos.