1. Introduction
The AULA F87 PRO is a versatile 87-key mechanical keyboard designed for gaming and general use, offering three connection modes: 2.4G wireless, Bluetooth, and USB wired. It features a gasket structure, hot-swappable switches, RGB backlighting, and PBT keycaps for a premium typing experience.

2. Setup and Connection
The AULA F87 PRO keyboard supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. Ensure the mode switch on the keyboard is set correctly for your desired connection type.

2.1. Wired Mode Connection
- Locate the mode switch on the keyboard and set it to the [Wired] position.
- Connect one end of the provided Type-C USB cable to the Type-C port on the keyboard.
- Connect the other end of the Type-C USB cable to an available USB port on your computer.
- The keyboard will be powered via the USB connection, and the internal battery will stop powering the keyboard.
2.2. 2.4G Wireless Mode Connection
- Locate the mode switch on the keyboard and set it to the [2.4G] position.
- Remove the USB receiver (dongle) from its storage slot, typically found on the keyboard itself.
- Plug the USB receiver into an available USB port on your computer.
- Initial Pairing: Short press the FN + ~ (tilde) key combination to activate 2.4G mode.
- Manual Pairing (if needed): Long press the FN + ~ key combination for approximately 3 seconds. The '1' key (or 'Home' button) will flash a rapid cyan light, indicating the keyboard is in pairing mode. At this point, ensure the USB receiver is plugged into your computer.
2.3. Bluetooth Mode Connection
The keyboard supports Bluetooth connectivity for multiple devices (Windows, Mac, iOS, Android).
- Locate the mode switch on the keyboard and set it to the [BT] position.
- On your device (computer, tablet, smartphone), navigate to the Bluetooth settings.
- Search for available Bluetooth devices and select the AULA F87 PRO keyboard to pair.
- Follow any on-screen prompts to complete the pairing process.

3. Operating Instructions
3.1. RGB Backlight Control
The AULA F87 PRO features dynamic RGB backlighting with approximately 16 million colors and 16 no-drive lighting modes. It can also achieve 10 kinds of music rhythm RGB lighting effects with the custom driver.


Specific key combinations (FN + function keys) are typically used to cycle through lighting modes, adjust brightness, change colors, and turn the RGB lighting on/off. Refer to the keyboard's function key legends or the official software for detailed controls.
3.2. Function Keys (FN Combinations)
The keyboard includes FN key combinations for various functions. These allow control over multimedia, lighting, and connection modes.
- FN + ~: Switch to 2.4G mode / Initiate 2.4G pairing.
- FN + [other keys]: Control RGB lighting effects, brightness, speed, and direction.
- FN + [F1-F12]: Multimedia controls (e.g., volume, play/pause, track skip).
A comprehensive list of FN key combinations can be found in the official user manual PDF, available for download from the product page.
4. Maintenance
4.1. Keycap and Switch Replacement
The AULA F87 PRO features full key hot-swappable sockets, supporting both 3-pin and 5-pin switches. This allows for easy customization and replacement of switches without soldering.


- Use a switch puller tool to carefully remove the desired keycap.
- Use a switch puller to gently extract the switch from its socket.
- Align the pins of the new switch with the holes on the PCB and press firmly until it clicks into place.
- Replace the keycap.
The keyboard also features two-tone PBT keycaps, which are durable and provide a comfortable operating experience.

4.2. Cleaning
To clean your keyboard, first disconnect it from your computer. Use a soft brush or compressed air to remove dust and debris from between the keycaps. For stubborn dirt, gently wipe the keycaps with a damp cloth and mild soap, ensuring no liquid enters the keyboard.
5. Troubleshooting
5.1. Keyboard Not Responding
- Wired Mode: Ensure the Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode: Check if the USB receiver is properly plugged in. Ensure the keyboard is switched to 2.4G mode and try re-pairing (FN + ~ for 3 seconds).
- Bluetooth Mode: Verify the keyboard is in BT mode and paired correctly with your device. Try unpairing and re-pairing the keyboard in your device's Bluetooth settings.
- Battery: If in wireless mode, check the battery indicator. Recharge the keyboard if the battery is low.
5.2. RGB Lighting Issues
- If RGB lighting is not working or behaving unexpectedly, try cycling through the lighting modes using FN key combinations.
- Ensure the keyboard's custom driver software is installed and up-to-date for advanced lighting controls.
- If the side light strip is off, use the shortcut keys to switch sidelight modes or turn it on.
5.3. Keys Not Registering
- If specific keys are not working, consider the hot-swappable nature. Carefully remove the keycap and switch for the affected key and reseat them. If the issue persists, the switch may need replacement.
- Ensure the keyboard is not in a locked or disabled mode.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | AULA |
| Model | F87 PRO |
| Keyboard Standard | 87 Keys |
| Interface Type | USB, Bluetooth, Bluetooth / USB (Tri-mode Connection) |
| Operation Style | Mechanical (Hot-swappable 3-pin/5-pin switches) |
| Keycup Material | ABS Plastic (Two-tone PBT keycaps) |
| Backlight Type | MULTICOLOR (RGB, 16 million colors, 16 modes, 10 music rhythm effects) |
| Battery Included | Yes (4000mAh) |
| Charging Port | Type-C |
| Charging Voltage/Current | DC 5V / 600mA |
| Rated Voltage | DC 3.7V (full 4.2V) |
| Rated Current | 210mA@3.7V (default light effect), 15mA (all lights off) |
| Battery Life | Approx. 44 hours (default light effect), Approx. 532 hours (all lights off) |
| Total Stroke of Keys | 4.0mm |
| Product Size | 365.70 x 138.90 x 42.70 + 1mm |
| Product Weight | Approx. 987g (excluding wire/receiving ring), Approx. 1006g (including wire/receiver) |
| Gasket Structure | Yes, with 5 layers of sound-shock absorbing foam (PORON cotton, IXPE shaft bottom pad, PET sound pad, bottom cotton of shaft seat, silicone underlay) |
| PCB | 1.2mm PCB Single Key Slot, Slotted PC Positioning Plate |
| Application | Desktop, Laptop, Number, Tablet |
| Wrist Support | No |
| Certification | CE |
| Origin | Mainland China |



7. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download, which may contain additional information regarding warranty terms and support contacts. You can find the PDF at: User manual (PDF).
8. User Tips
- RGB Control: The keyboard features extensive RGB lighting, including a side light strip. Use the designated FN key combinations to customize or turn off the lighting to suit your preference.
- Key Count: While the model name includes 'F87 Pro', the keyboard features an 87-key layout, which is a compact design without a dedicated number pad.
- Customization: Take advantage of the hot-swappable switches and PBT keycaps to personalize your typing feel and aesthetic.