1. Introduction
The JIKONG BMS JK B2A8S Smart Active Equalizer is a balanced management system designed for large-capacity series battery packs. It utilizes ultracapacitors for active energy transfer, ensuring efficient cell balancing.
This equalizer is suitable for battery packs ranging from 2 to 8 series (2S-8S), offering precise voltage collection and balancing functions. It operates with a constant balance current of 0.1-2A, independent of the voltage difference between battery cells. With a cell voltage acquisition range of 1V to 5V and an accuracy of ±3mV, it is compatible with various battery types including Li-ion, LiPo, LiFePo4, and LTO.
Equipped with Bluetooth communication, the device supports a mobile APP for remote operation, allowing users to monitor individual battery voltages, check balancing status, and modify parameters. Its compact size makes it ideal for applications such as small sightseeing cars, scooters, shared vehicles, high-power energy storage systems, base station backup power supplies, and solar power stations, as well as for battery maintenance and repair.
2. Key Features
- LED Bluetooth status indicator for quick visual feedback.
- Mobile APP support for Bluetooth remote operation and monitoring.
- High-precision voltage acquisition with an accuracy of ±3mV.
- Active equalization for efficient cell balancing.
- Constant balance current of 0.1-2A.
- Wide compatibility with Li-ion, LiPo, LiFePo4, and LTO battery types.
- Supports 2-8 series battery packs.
- Supply voltage range of 12-40V.
3. Safety Information
Please read and understand all safety instructions before installing or operating the JIKONG BMS JK B2A8S Smart Active Equalizer. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the battery pack from any power source before installation or maintenance.
- Ensure all wiring connections are secure and correctly polarized to prevent damage to the equalizer or battery.
- Do not operate the device in wet or damp conditions.
- Avoid short-circuiting the battery terminals or the equalizer's connection points.
- Only use the equalizer with compatible battery types (Li-ion, LiPo, LiFePo4, LTO) and within the specified voltage and series range (2-8S).
- Keep the device away from flammable materials and heat sources.
- If the device shows signs of damage or malfunction, discontinue use immediately and contact support.
- Installation should be performed by individuals with appropriate electrical knowledge.
4. Package Contents
Upon opening the package, please verify that all items are present and in good condition.
- JIKONG BMS JK B2A8S Smart Active Equalizer Unit
- Wiring Harness (multi-pin connector with red and black wires)

Figure 4.1: JIKONG BMS JK B2A8S Smart Active Equalizer and wiring harness in packaging.
Video 4.1: Unboxing of the JIKONG BMS JK B2A8S Smart Active Equalizer, showing the device and its included wiring harness.
5. Specifications
| Attribute | Value |
|---|---|
| Model Number | B2A8S |
| Brand Name | JIKONG |
| Accessory Type | Battery Accessories |
| Certification | CE |
| Function | Bluetooth, Active equalization |
| Balance Current | 0.1-2A |
| Battery Strings | 2-8S (3S, 4S, 5S, 6S, 7S supported) |
| Supply Voltage | 12-40V |
| Battery Type Compatibility | Li-ion, LiFePo4, LTO |
| Operating Temperature | -30-70℃ |
| Active Equalizer Size | 136.6 x 85.3 x 20.5mm |
| Voltage Acquisition Range | 1V ~ 5V |
| Voltage Acquisition Accuracy | ±3mV |
| Charger Included | No |
| Battery Included | No |

Figure 5.1: Physical dimensions of the JIKONG BMS JK B2A8S Smart Active Equalizer.
6. Setup and Installation
6.1 Wiring Connections
Carefully follow the wiring diagrams below based on your battery pack configuration. Ensure all connections are correct before applying power.

Figure 6.1: Wiring diagram for connecting the JIKONG BMS JK B2A8S with an existing BMS protection plate. Connect 'V+' to the positive terminal of the battery pack and 'V-' to the negative terminal. Balance wires B0-B8 connect to corresponding cell terminals. Note: When using JK-B1A16S-TH with other brands of same port protection plate, 'V' needs to be connected to the 'P-' of the protection plate.

Figure 6.2: Wiring diagram for direct connection of the JIKONG BMS JK B2A8S to a battery pack without an external BMS. Connect balance wires B0-B8 to corresponding cell terminals and provide a DC 12-40V power supply.
- Balance Wires (B0-B8): Connect these wires to the individual cell terminals of your battery pack, starting from B0 (negative terminal of the first cell) up to B8 (positive terminal of the 8th cell). Ensure the order is correct.
- Power Supply (DC 12-40V): Connect the appropriate power supply to the designated input terminals if required for your setup (refer to Figure 6.2 for direct connection).
- BMS Integration (if applicable): If integrating with an existing BMS, follow Figure 6.1. Pay close attention to the 'V+' and 'V-' connections and any specific instructions for your BMS model.
6.2 Mobile APP Installation
The equalizer features Bluetooth connectivity for monitoring and control via a mobile application. To install the APP:
- Locate the QR code on the product label (refer to Figure 6.3).
- Scan the QR code with your smartphone's camera or a QR code scanner app.
- Follow the on-screen instructions to download and install the JIKONG BMS mobile application.

Figure 6.3: Product label showing the QR code for APP download.
7. Operating Instructions
7.1 Powering On and Bluetooth Connection
- Once the equalizer is correctly wired to your battery pack, apply power to the system.
- The LED indicator on the equalizer will illuminate, indicating power is supplied and Bluetooth is active.
- Open the JIKONG BMS APP on your smartphone.
- The APP should automatically detect the equalizer via Bluetooth. If not, initiate a scan within the APP and select your device from the list.
- Once connected, the APP will display real-time battery information.
7.2 Monitoring and Balancing
Through the mobile APP, you can:
- View Individual Cell Voltages: Monitor the voltage of each cell in your battery pack.
- Check Balance Status: Observe the active balancing process and the current balance state of the cells.
- Modify Parameters: Adjust certain operational parameters of the equalizer as needed (refer to the APP's specific instructions for available settings).
The active equalizer will automatically begin balancing cells when voltage differences are detected, transferring energy from higher voltage cells to lower voltage cells to achieve equilibrium.
8. Maintenance
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Cleanliness: Keep the equalizer unit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Environmental Conditions: Ensure the equalizer operates within its specified temperature range (-30-70℃) and avoid exposure to excessive moisture or direct sunlight.
- Firmware Updates: Check the JIKONG BMS APP regularly for any available firmware updates for the equalizer to ensure optimal performance and access to new features.
9. Troubleshooting
- No Power/LED Off:
- Check the main power supply to the battery pack.
- Verify all wiring connections, especially the main power input to the equalizer.
- Ensure the battery pack voltage is within the 12-40V operating range.
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on your smartphone.
- Make sure the equalizer is powered on and within Bluetooth range.
- Restart the JIKONG BMS APP and try reconnecting.
- If issues persist, try restarting your smartphone.
- Inaccurate Voltage Readings:
- Verify that the balance wires (B0-B8) are correctly connected to each cell terminal and are not loose or damaged.
- Ensure the wires are not excessively long or thin, which could introduce resistance and affect accuracy.
- Balancing Not Occurring:
- Confirm that the equalizer is powered on and connected via Bluetooth.
- Check the cell voltage differences in the APP; balancing only occurs when there's a detectable imbalance.
- Ensure the battery type selected in the APP (if configurable) matches your battery chemistry.
If you encounter persistent issues not covered here, please refer to the APP's help section or contact JIKONG customer support.
10. User Tips
No specific user tips were available from provided reviews or Q&A. However, general best practices for battery management systems include:
- Initial Balance: For new battery packs or after significant changes, allow the equalizer sufficient time to perform an initial balance, which may take several hours depending on the imbalance.
- Regular Monitoring: Periodically check the cell voltages via the APP, especially after charging or discharging cycles, to ensure optimal battery health.
- Secure Mounting: Mount the equalizer securely in a location that is protected from physical damage, excessive vibration, and extreme temperatures.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.