1. Introduction
This manual provides detailed instructions for assembling the RPG MK-15 Phalanx Close-In Weapon System 1/35 Scale Model Kit. This highly detailed model kit is designed for adult collectors and requires self-provided tools, glue, and paint for assembly. Please read all instructions carefully before beginning assembly.
WARNING: This product is a detailed scale kit for adult collectors to assemble. Not for children under 14 years due to small parts. Actual model may vary from image on box. Be careful not to put it in your mouth, causing suffocation risk.
2. Specifications
This model kit represents the MK-15 Phalanx Close-In Weapon System at a 1:35 scale. Key characteristics of the system are detailed below:
| Attribute | Detail |
|---|---|
| Model Scale | 1:35 |
| Material | Plastic |
| Recommended Age | 14+ years |
| Origin | Mainland China |
| Weight (with missiles) | 6200 kg (real system) |
| Barrel Length | 1.98 m (real system) |
| Height | 4.7 m (real system) |
| Elevation | -25° to +85° (real system) |
| Shell Type | MK 149AP Discarding Sabot (real system) |
| Range | 3.6 km (real system) |
| Rate of Fire | 4500 rounds/min (real system) |
| Armament | M61 Vulcan 20mm 6-barrel gatling cannon (real system) |
| Guidance | Ku-band radar and infra-red (real system) |
| Muzzle Velocity | 1.1 km/s (real system) |
3. Package Contents
Your RPG MK-15 Phalanx Model Kit typically includes the following components:
- Multiple plastic sprues containing injection-molded parts.
- Photo-etched (PE) parts for enhanced detail.
- Decal sheet for markings and insignia.
- Instruction booklet (this manual).
Please verify all parts are present and undamaged upon opening the box. If any parts are missing or damaged, please contact customer support.
4. Assembly Instructions
Assembly of this model kit requires patience and attention to detail. Follow the steps below and refer to the included diagrams for guidance.
4.1. Tools and Materials Required (Not Included)
- Plastic cement or super glue (for plastic parts)
- Cyanoacrylate (CA) glue (for photo-etched parts)
- Hobby knife or sprue cutters
- Sandpaper or sanding sticks
- Tweezers
- Small files
- Paints and brushes (acrylic or enamel, as desired)
- Masking tape
4.2. General Assembly Steps
- Preparation: Carefully remove parts from the sprues using sprue cutters or a hobby knife. Clean any mold lines or excess plastic (flash) using a hobby knife, sandpaper, or files.
- Test Fit: Before applying glue, always test fit parts to ensure proper alignment and fit. Trim or sand as necessary.
- Gluing: Apply a small amount of plastic cement to one surface and press the parts together firmly. For photo-etched parts, use CA glue sparingly.
- Sub-Assemblies: Assemble smaller sections or sub-assemblies first, such as the gun barrel, radar dome, and base components, before combining them into the main structure.
- Painting (Optional): Many modelers prefer to paint sub-assemblies before final assembly. Refer to reference images for accurate color schemes.
- Decals: Apply decals after painting and a clear gloss coat. Use decal setting solutions for best results.
- Final Assembly: Combine all painted and decaled sub-assemblies to complete the model.
5. Operating Instructions
This product is a static display model kit. It is not designed for functional operation. Once assembled, the model can be displayed as a detailed replica of the MK-15 Phalanx Close-In Weapon System. Some parts, such as the gun barrel, may have limited articulation if designed into the kit, allowing for posing.
6. Maintenance
To ensure the longevity and appearance of your assembled model:
- Cleaning: Dust the model regularly with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials.
- Handling: Handle the model carefully, especially delicate parts like antennas or small photo-etched details, to prevent breakage.
- Storage: Store the model in a cool, dry place away from direct sunlight, which can cause paint fading or plastic warping.
7. Troubleshooting
Common issues encountered during model kit assembly and their solutions:
- Parts not fitting: Ensure all flash is removed and test fit parts before gluing. Light sanding or trimming may be required.
- Gaps between parts: Use plastic putty or filler to fill gaps, then sand smooth before painting.
- Decals not adhering: Ensure the surface is clean and glossy. Use decal setting solutions to help decals conform to irregular surfaces.
- Paint issues: Ensure surfaces are clean and primed. Apply thin coats of paint to avoid obscuring detail.
8. User Tips
- Always work in a well-ventilated area when using glues and paints.
- Keep small parts in a tray or container to prevent loss.
- Consider using a magnifying lamp for intricate details and photo-etched parts.
- Reference images of the real MK-15 Phalanx can be very helpful for accurate painting and detailing.
9. Warranty and Support
For any questions regarding missing parts, damaged components, or assembly assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
10. Safety Warnings
- Small Parts: This kit contains small parts which may pose a choking hazard. Keep away from young children.
- Sharp Tools: Assembly requires the use of sharp tools (hobby knives, cutters). Exercise extreme caution to prevent injury.
- Chemicals: Glues and paints contain chemicals. Use in a well-ventilated area and avoid prolonged skin contact or inhalation. Follow the safety instructions provided with your chosen glues and paints.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
