Aigo TA51

Contents

Aigo TA51 True Wireless Earphones User Manual

Model: TA51

1. Introduction

Thank you for choosing the Aigo TA51 True Wireless Earphones. These earbuds are designed to provide a high-quality audio experience with advanced features such as Bluetooth 5.4 connectivity, ergonomic design for comfort, and long battery life. Please read this manual carefully before use to ensure proper operation and to maximize your enjoyment of the product.

2. Package Contents

  • Aigo TA51 True Wireless Earphones (Left and Right earbuds)
  • Charging Case
  • USB-C Charging Cable
  • User Manual (this document)

3. Product Overview

The Aigo TA51 earphones feature a comfortable in-ear design, a 10mm dynamic driver for rich sound, and an HD microphone for clear calls. The charging case provides extended battery life, and the earbuds utilize the latest Bluetooth 5.4 technology for stable and fast connections.

Aigo TA51 TWS Earbuds in beige with charging case

Figure 3.1: Aigo TA51 True Wireless Earphones (Beige)

Detailed diagram of the 10mm dynamic driver for high-definition sound

Figure 3.2: 10mm Large Dynamic Driver for High-Definition Sound Quality

Infographic summarizing features: 10mm dynamic, 39h endurance, touch control, Bluetooth 5.4, USB-C, ergonomic design.

Figure 3.3: Key Features Overview

4. Setup Instructions

4.1. Charging the Earphones and Case

  1. Place both earbuds into the charging case.
  2. Connect the USB-C charging cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port).
  3. The indicator lights on the case will show the charging status. The charging case takes approximately 2 hours to fully charge.
  4. Ensure the earbuds are fully charged before first use for optimal battery performance.

4.2. Pairing with a Bluetooth Device

  1. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light on the earbuds.
  2. On your device (smartphone, tablet, computer), enable Bluetooth.
  3. Search for available Bluetooth devices and select "aigo TA51" from the list.
  4. Once connected, the indicator light on the earbuds will stop flashing, and you will hear a confirmation tone.
  5. If pairing fails, place the earbuds back into the case, close the lid, wait a few seconds, and then repeat the steps.

5. Operating Instructions

The Aigo TA51 earphones feature intuitive touch controls on each earbud.

Diagram illustrating touch control functions for calls, music, and voice assistant.

Figure 5.1: Touch Control Functions

5.1. Music Playback

  • Play/Pause: Single click on the touch area of either earbud.
  • Next Song: Double click on the touch area of the right earbud.
  • Previous Song: Triple click on the touch area of the left earbud.

5.2. Call Management

  • Answer Call: Single click on the touch area of either earbud.
  • Hang Up Call: Single click on the touch area of either earbud during a call.
  • Reject Incoming Call: Double click on the touch area of either earbud.

5.3. Voice Assistant

  • Activate Voice Assistant: Long press the touch area of either earbud for 2 seconds.

5.4. Power On/Off

  • Power On: Open the charging case, or long press the touch area for a few seconds if earbuds are out of case and off.
  • Power Off: Place the earbuds back into the charging case and close the lid, or long press the touch area for a few seconds until powered off.

6. Maintenance

  • Keep the earbuds and charging case clean and dry. Avoid exposure to extreme temperatures, humidity, or corrosive liquids.
  • Clean the earbuds and charging contacts regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid dropping or subjecting the device to strong impacts.

7. Troubleshooting

ProblemPossible CauseSolution
Earbuds not pairingEarbuds are out of range, low battery, or not in pairing mode.Ensure earbuds are charged. Place them back in the case, close, then reopen to re-enter pairing mode. Check device's Bluetooth settings.
No sound from one earbudEarbuds not properly connected, low battery, or individual earbud issue.Try re-pairing both earbuds. Ensure both are charged. Reset earbuds if necessary (refer to manufacturer support for specific reset steps).
Charging case not chargingFaulty cable, power source, or charging port.Try a different USB-C cable and power adapter. Ensure the charging port is clean and free of debris.
Poor sound qualityWeak Bluetooth connection, earbud fit, or dirty ear tips.Ensure your device is within 10m of the earbuds. Adjust earbud fit. Clean ear tips and speaker mesh.

8. Specifications

Product parameters table and important notes on battery life and accuracy.

Figure 8.1: Product Parameters and Notes

FeatureSpecification
Product ModelTA51
Bluetooth VersionBluetooth V5.4
Music Playback TimeAbout 6.5 hours (at 30% volume)
Total Endurance (with charging case)Up to 39 hours
Charging Case Battery3.7V 300mAh
Earphone Battery3.7V 40mAh * 2
Charging Voltage/CurrentDC 5V, 500mA
Charging Time (Case)About 2 hours
Call TimeAbout 3 hours
Audio DecodingSBC/AAC
Speaker Driver Diameter10mm
Speaker Impedance32Ω ± 10%
Paired Nameaigo TA51
Transmission Distance10m/Class 2
Supporting ProtocolsHSP/HFP/A2DP/AVRCP
Operating Temperature-10 to 40 °C
Weight91g
MaterialPlastic, Silica Gel
WaterproofYes
With MicrophoneYes
Active Noise-CancellationYes
ConnectorsType C
CertificationCE

Note: Due to minor differences in electronic components of the product, there may be slight differences in product parameters. Please refer to the actual product for accuracy. Playback time is tested at 30% volume. Total battery life is achieved when used with a single earphone and paired with a charging compartment. All data is for testing at Aiyueshi Laboratory and is for reference only; actual usage time may vary.

9. User Tips

  • Battery Life: Remember that the stated music playback time (6.5 hours) is at 30% volume. Higher volumes will reduce battery life. The total 39 hours includes recharges from the case.
  • Multi-Device Connectivity: The specifications do not explicitly mention support for connecting to two devices simultaneously (multi-point connectivity). If you need to switch between devices, disconnect from the current device before connecting to a new one.
  • Ergonomic Fit: The earbuds are designed for comfort. Experiment with different ear tip sizes (if provided, though not explicitly listed in package contents, it's a common accessory) to find the best fit for stable wear and optimal sound.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.