NEWBOLER LIG015

Contents

NEWBOLER LIG015 Bicycle Headlight User Manual

Model: LIG015 | Brand: NEWBOLER

1. Introduction

This manual provides detailed instructions for the NEWBOLER LIG015 Bicycle Headlight. This super bright, waterproof, and USB-rechargeable light is designed to enhance safety and visibility for mountain biking (MTB) and road cycling. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

A PDF version of this user manual is available for download: User manual (PDF)

2. Package Contents

Please check the box for the following items:

  • NEWBOLER Bicycle Headlight Unit (LIG015)
  • USB-C Charging Cable
  • Handlebar Clamps (2 pcs)
  • Rubber Spacers (4 pcs, for various handlebar diameters)
  • Allen Key
  • Mounting Screws (2 pcs)
  • USB-A to USB-C Adapter (for power bank function)
NEWBOLER LIG015 Bicycle Headlight and all included accessories
Image: NEWBOLER LIG015 Bicycle Headlight and all included accessories.

3. Specifications

FeatureSpecification
Brand NameNEWBOLER
Model NumberLIG015 (also LIG010, LIG012, LIG013 variants)
TypeHEADLIGHTS
Body MaterialAluminum alloy
Mounting PlacementHandlebar
Waterproof LevelIPX5
CertificationCE
Light Beads17 Pcs P9 Lamp Beads (for LIG015/LIG010)
Irradiate Distance200m
Size17.5 x 2.8 x 4.8 cm
Package Weight482g

Model-Specific Specifications:

ModelLumens (Max)Battery CapacityWork TimeCharging TimePower Bank Function
LIG0151000010000 mAh4.5-9 hours5-7 hoursYes
LIG0101000010000 mAh (2*21700)4.5-10.5 hours~8 hoursYes
LIG01280005000 mAh5-10 hours4-6 hoursNo
LIG01330002000 mAh2-3 hours2-4 hoursNo
Product size and specifications table
Image: Product dimensions and key specifications.

4. Setup and Installation

The NEWBOLER Bicycle Headlight offers two types of installation: normal bracket and extended bracket. The LIG013 model typically uses a single bracket for stability.

Handlebar Installation Steps:

  1. Step 1: Put the base over the handlebar. Place rubber spacers as needed to ensure a snug fit for your handlebar diameter.
  2. Step 2: Adjust the position of the base and tighten the base screws using the provided Allen key.
  3. Step 3: Install the second bracket (if using two) in the same way, ensuring it is securely fastened.
  4. Step 4: Push the lamp unit into place on the installed base/brackets. Tighten the bottom screws to fix the light securely.
Four step installation guide for the bicycle light on a handlebar
Image: Step-by-step guide for handlebar installation.
Comparison of normal and extended bracket installation types
Image: Two types of installation: Normal bracket and Extended bracket.

Video: Installation Demonstration

Video: This video demonstrates the installation process of the bicycle light on a handlebar, showing how to secure the brackets and the light unit.

5. Operating Instructions

Power On/Off and Mode Selection:

Press the power button located on the top of the light unit to turn it on. Subsequent presses will cycle through the available lighting modes. Press and hold the power button to turn the light off.

Lighting Modes:

The light features 4 distinct modes to suit various riding conditions:

  • Floodlight: Provides a wide, even spread of light.
  • Spotlight: Focuses light into a narrower, more intense beam.
  • High Light: Combines floodlight and spotlight for maximum illumination.
  • Flash: A flashing mode for increased visibility.
Diagram showing four lighting modes: Floodlight, Spotlight, High Light, and Flash, with estimated runtimes
Image: Illustration of the four lighting modes and their approximate durations.

Digital Display Function:

The integrated digital display provides real-time information:

  • Display 1: Use Time - Shows the remaining estimated operating time in the current mode.
  • Display 2: Power% - Indicates the current battery charge level (0-100%).
Digital display showing use time and battery percentage
Image: Digital display showing remaining use time and battery percentage.

Charging the Device:

The bicycle light is USB-C rechargeable. Connect the provided USB-C cable to the light's charging port and to a suitable USB power source (e.g., wall adapter, computer USB port). The digital display will show the charging progress.

Power Bank Function (LIG015 & LIG010 models only):

Certain models (LIG015, LIG010) can function as a power bank to charge other USB devices. Use the provided USB-A to USB-C adapter to connect your device to the light's USB-C port. The light's battery will then be used to charge your external device.

Bicycle light charging a smartphone via USB-C, demonstrating power bank function
Image: Demonstrating the Type-C reverse charging (power bank) function.

6. Maintenance

  • Cleaning: Wipe the light unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the light in a cool, dry place when not in use. Avoid extreme temperatures.
  • Battery Care: To prolong battery life, charge the device regularly, even if not used frequently. Avoid completely draining the battery before recharging.
  • Water Resistance: The light is IPX5 waterproof, meaning it is resistant to water splashes and light rain. It is NOT designed for prolonged immersion in water or heavy downpours. Ensure the USB port cover is securely closed to maintain water resistance.

7. Troubleshooting

  • Light not turning on: Check the battery level on the digital display. If low, recharge the device. Ensure the power button is pressed firmly.
  • Light flickering or dim: This usually indicates a low battery. Recharge the device.
  • Power bank function not working: Ensure the light itself has sufficient battery charge. Verify that the USB-A to USB-C adapter and charging cable are correctly connected.
  • Water ingress: While IPX5 rated, avoid prolonged exposure to heavy rain or submerging the light. If water enters, turn off the device immediately and allow it to dry completely before attempting to use it again.

8. User Tips

  • Handlebar Fit: Use the provided rubber spacers to ensure a tight and stable fit of the clamps on your handlebar. This prevents the light from shifting during rides.
  • Battery Life: For longer rides, especially when using high lumen modes, consider carrying a portable power bank to extend the light's operating time, or choose a model with higher battery capacity like the LIG015 or LIG010.
  • LIG013 Bracket: If you have the LIG013 model, the single included bracket is sufficient for stable installation. If you purchased an optional extension bracket, you can use it to adjust the mounting position further.
  • Power Bank Use: When using the light as a power bank, monitor the light's battery level to ensure you have enough charge remaining for your ride.

9. Warranty and Support

Your NEWBOLER Bicycle Headlight is covered by a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical assistance, or any questions not covered in this manual, please contact NEWBOLER customer support through your purchase platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.