1. Introduction
Thank you for choosing the MLMZYML XT65 TWS Wireless Earphones. These earphones offer a truly wireless audio experience with advanced features like Bluetooth 5.3 connectivity, touch control, and environmental noise cancellation for calls. This manual will guide you through the setup, operation, and maintenance of your new earphones.
Package Contents:
- 2 x XT65 Wireless Earphones (Left and Right)
- 1 x Charging Case
- 1 x USB Type-C Charging Cable
- 1 x User Manual
2. Getting Started
2.1 Initial Charging
Before first use, ensure the earphones and charging case are fully charged.
- Place both earphones into the charging case.
- Connect the provided USB Type-C charging cable to the charging port on the case and plug the other end into a USB power adapter (not included).
- The LED digital display on the charging case will show the battery percentage, indicating charging status. The individual earbud indicators (L/R) will also show charging status.
- A full charge typically takes 1-2 hours for the charging case and earphones.

2.2 Pairing with Your Device
- Power On: Open the charging case. The earphones will automatically power on and enter pairing mode.
- Activate Bluetooth: On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings and turn on Bluetooth.
- Select Device: Look for "XT65" in the list of available devices and select it to connect.
- Confirmation: Once connected, you will hear an audio prompt, and the earphones will be ready for use.
- Automatic Reconnection: After the initial pairing, the earphones will automatically connect to the last paired device when taken out of the charging case, provided Bluetooth is enabled on your device.

3. Operating Instructions
3.1 Touch Controls
The XT65 earphones feature touch-sensitive areas for controlling playback, calls, and other functions. Specific touch gestures may vary slightly, but common functions include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call.
- Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
- Activate Voice Assistant (Siri/Alexa): Triple tap on either earbud.
- Volume Control: (If supported) Long press on the right earbud to increase volume, long press on the left earbud to decrease volume. Refer to your device's settings if this function is not directly controlled by the earbuds.
3.2 Game/Music Mode
The earphones support a low latency mode optimized for gaming. To switch between Game Mode and Music Mode, refer to the specific touch control sequence in the quick start guide or experiment with a long press or specific tap pattern (e.g., quad-tap) on one of the earbuds. Game mode reduces audio delay, enhancing the gaming experience.
3.3 Single Earbud Use (Binaural Call)
You can use either the left or right earbud independently. Simply take one earbud out of the case, and it will connect to your device. The other earbud can remain in the case or be used by another person for separate listening (if paired to a different device).

4. Maintenance
4.1 Cleaning
- Wipe the earphones and charging case with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Avoid getting moisture in any openings.
4.2 Waterproofing
The XT65 earphones are rated IPX6 waterproof, meaning they are protected against high-pressure water jets from any direction. This makes them suitable for sports and outdoor activities, but they are not designed for submersion in water. Do not wear them while swimming or showering.
4.3 Storage
When not in use, store the earphones in their charging case to protect them and keep them charged. Store the device in a cool, dry place away from extreme temperatures and direct sunlight.
5. Troubleshooting
- Earphones not pairing: Ensure both earphones are in the charging case, then open the lid. Check that Bluetooth is enabled on your device and try re-pairing. If issues persist, try forgetting the device in your phone's Bluetooth settings and re-pairing.
- No sound from one earbud: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. This often re-syncs them.
- Charging issues: Ensure the charging cable is securely connected to both the case and the power source. Check for any debris in the charging port.
- Low volume or poor sound quality: Ensure the earphones are properly seated in your ears. Check your device's volume settings.
- Intermittent connection: Ensure you are within the 10m transmission range and there are no significant obstructions between the earphones and your device.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MLMZYML |
| Model | XT65 |
| Material | PVC, ABS, Silica Gel |
| Weight | 50g |
| Bluetooth Version | 5.3 |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Maximum Wireless Range | <10m |
| Driver Diameter | 13mm |
| Number of Drivers | 2 |
| Vocalism Principle | Dynamic |
| Impedance Range | up to 32 Ω |
| Sensitivity | 30dB |
| Frequency Response Range | Not specified |
| Battery Life (Earbuds) | Approx. 3.5 hours (usage duration) |
| Total Playtime (with case) | Approx. 15 hours |
| Talk Time | 4-8 hours |
| Charging Time | 1-2 hours |
| Charging Method | Charging case (USB Type-C) |
| Waterproof Rating | IPX6 |
| Microphone | Yes (with Environmental Noise Cancelling for calls) |
| Active Noise-Cancellation (ANC) | No (features Environmental Noise Cancelling (ENC) for calls) |
| Volume Control | Yes |
| Control Button | No (features touch control) |
| Supported Protocols | A2DP/AVRCP/HFP/HSP |
| Compatibility | Android, iOS, Windows |

7. User Tips
- Optimal Fit: Ensure the earbuds fit snugly in your ears for the best sound quality and noise isolation.
- Battery Management: For extended battery life, always place the earphones back into the charging case when not in use.
- Game Mode: Utilize the low latency game mode for a more synchronized audio experience during gaming sessions.
- Environmental Noise Cancelling (ENC): While the earphones do not have Active Noise Cancellation (ANC) for general listening, the ENC feature is designed to improve call clarity by reducing background noise for the person on the other end of your call.
- Regular Cleaning: Periodically clean the earbuds and charging contacts to prevent dust and debris from affecting performance.
8. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.