EARU EAEMP3C-100-TY-W

Contents

EARU EAEMP3C-100-TY-W 3 Phase Tuya WiFi Smart Energy Meter & Protector Instruction Manual

Brand: EARU | Model: EAEMP3C-100-TY-W

1. Introduction

The EARU EAEMP3C-100-TY-W is a smart 3-phase energy meter and protector designed for comprehensive electrical system management. It offers real-time monitoring of energy consumption, voltage, current, and frequency, along with advanced protection features against over/under voltage, over/under current, leakage, and high temperature. Integrated with Tuya WiFi, it allows for remote control and monitoring via a smartphone application, supporting voice control through Google Assistant and Amazon Alexa.

2. Safety Information

WARNING: Installation must be performed by a qualified electrician. Disconnect power before installation or maintenance. Do not operate the device if it is damaged. Ensure proper grounding. Follow all local electrical codes and regulations.

  • Always wear appropriate personal protective equipment (PPE) during installation.
  • Do not expose the device to moisture or extreme temperatures.
  • Ensure all connections are secure and correctly wired to prevent electrical hazards.

3. Package Contents

Verify that all items are present in the package:

  • 1 x EARU EAEMP3C-100-TY-W Smart Energy Meter & Protector Unit
  • 1 x Current Transformer (CT)
  • 1 x User Manual (this document)

4. Specifications

AttributeValue
Model NumberEAEMP3C-100-TY-W
Rated VoltageAC380V
Operation VoltageAC80V-400V (Single Phase)
Rated Frequency50Hz/60HZ
Max Operating Current80A - 99A
Measuring Energy Range0-9999999.99kWh
Accuracy Class1%
PhaseThree Phase
Power SupplyAC
Display TypeLCD
Operating Temperature-30℃~70℃
Dimensions90*77*75.5mm
CertificationCE, FCC, RoHS, KC
Over Voltage Limit120-300V (Adjustable) (Default:275V)
Under Voltage Limit80-210V (Adjustable) (Default:175V)
Over Current Limit1-100A (Adjustable) (Default:80A)
Under Current Limit1-100A (Adjustable) (Default:10A)
Leakage Current Limit10-99A (Adjustable) (Default:29mA)
High Temperature Alarm10℃-85℃ (Adjustable) (Default:85℃)
Display ModeDisplay Mode 1 and 2 (Default:Display Mode 1)
Over & Under Voltage Protection Recovery Time1-9999s (Adjustable) (Default:20s)
Over & Under Current Protection Delay0000-9999s (Adjustable) (Default:5s)
Over & Under Current Protection Recovery Time0000-9999s (Adjustable) (Default:20s)
Under & Over Voltage Protection Delay1-9999s (Adjustable) (Default:3s)
Three-Phase Current Imbalance Alarm10-100% (Adjustable) (Default:20%)
Voltage Three-Phase Imbalance Alarm0-100% (Adjustable) (Default:20%)
Lost Current Recovery Delay Time1-9999s (Adjustable) (Default:20s)
Time Threshold of Lost Flow Event1-999s (Adjustable) (Default:10s)

5. Setup

5.1 Physical Dimensions

Refer to the diagram below for the physical dimensions of the device and current transformer.

Dimensions of the EARU Smart Energy Meter and Current Transformer

Figure 5.1: Device and Current Transformer Dimensions

5.2 Wiring Diagram

Follow the wiring diagram carefully for correct installation. Ensure all power is disconnected before proceeding.

Wiring diagram for the EARU 3 Phase Smart Energy Meter

Figure 5.2: Wiring Diagram

Note: One zero wire and three fire wires must pass through the current transformer at the same time. Otherwise, no leakage value can be detected.

Press down on the yellow button to insert the connector, then connect the connector to the transformer.

5.3 App Pairing (Tuya Smart / Smart Life)

To enable smart features, pair your device with the Tuya Smart or Smart Life application.

  1. Download the Tuya Smart or Smart Life app from your smartphone's app store.
  2. Register or log in to your account.
  3. On the device, the WiFi indicator light will flash. Fast flashing indicates it's searching for a WiFi signal.
  4. In the app, tap 'Add Device' or the '+' icon. The app may automatically detect the device.
  5. If the device does not connect automatically, long-press the third key on the meter's screen (the one showing voltage) for three seconds to initiate pairing mode.
  6. Follow the on-screen instructions in the app to complete the pairing process, including entering your WiFi network credentials.
  7. Once successfully paired, the WiFi indicator light will be solid, and the device will appear in your app.

Video 5.1: Demonstration of App Pairing and Basic Operation

The app interface allows for monitoring and control. An example of the app's energy statistics and settings is shown below.

Tuya Smart app interface showing energy statistics and settings

Figure 5.3: Tuya Smart App Interface

6. Operating Instructions

6.1 Display Modes

The device features an upgraded color screen with two main display modes:

Display modes of the smart energy meter showing various parameters

Figure 6.1: Device Display Modes

  • Mode 1: Displays Voltage, Total Electricity Consumption, Current, Forward Electricity Consumption, Power, Reverse Electricity Consumption, Power Factor, and Frequency.
  • Mode 2: Displays A-Phase Power Parameters & Temperature, B-Phase Power Parameters & Temperature, and C-Phase Power Parameters & Temperature.

6.2 Timer Functions

The device supports three time setting modes via the app:

Examples of timing, countdown, and cycle time modes for smart control

Figure 6.2: Timer Setting Modes

  • Timing Mode: Set a specific time for the device to turn on or off (e.g., turn on living room lights at 18:00).
  • Countdown Mode: Set a countdown timer for the device to turn off after a specified duration (e.g., turn off bedroom lights after 20 minutes).
  • Cycle Timing Mode: Schedule recurring on/off cycles (e.g., turn on before getting up, turn off after work).

6.3 Remote Control and Voice Control

Once paired with the Tuya Smart app, you can remotely control the device from anywhere. The device is also compatible with Google Assistant and Amazon Alexa for voice control commands.

7. Alarm Settings

The device offers various protection functions with adjustable alarm thresholds. The alarm function is automatically turned on after setting the threshold, and the protection tripping switch can be turned on or off.

App interface for alarm settings and threshold adjustments

Figure 7.1: Alarm Settings in App

7.1 Adjusting Settings on the Device

You can adjust fault settings directly on the device:

Flowchart for adjusting fault settings on the device

Figure 7.2: Fault Settings Adjustment Flow

  1. Long press OK key: To enter the settings states and show the settings.
  2. Change settings: Use the UP/DOWN keys to adjust values.
  3. Short press OK key: To confirm the settings on the current page and jump to the next settings page.
  4. Long press OK key: To exit the settings states and save the settings.

7.2 Key Protection Functions and Default Settings

  • Over Voltage Limit: Default 275V (Adjustable 120-300V)
  • Under Voltage Limit: Default 175V (Adjustable 80-210V)
  • Over Current Limit: Default 80A (Adjustable 1-100A)
  • Under Current Limit: Default 10A (Adjustable 1-100A)
  • Leakage Current Limit: Default 29mA (Adjustable 10-99A)
  • High Temperature Alarm: Default 85℃ (Adjustable 10℃-85℃)
  • Over & Under Voltage Protection Recovery Time: Default 20s (Adjustable 1-9999s)
  • Over & Under Current Protection Delay: Default 5s (Adjustable 0000-9999s)
  • Over & Under Current Protection Recovery Time: Default 20s (Adjustable 0000-9999s)
  • Under & Over Voltage Protection Delay: Default 3s (Adjustable 1-9999s)
  • Three-Phase Current Imbalance Alarm: Default 20% (Adjustable 10-100%)
  • Voltage Three-Phase Imbalance Alarm: Default 20% (Adjustable 0-100%)
  • Lost Current Recovery Delay Time: Default 20s (Adjustable 1-9999s)
  • Time Threshold of Lost Flow Event: Default 10s (Adjustable 1-999s)

8. Maintenance

  • Cleaning: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Connection Check: Periodically check all wiring connections to ensure they are tight and secure. Loose connections can lead to overheating or malfunction.
  • Environmental Conditions: Ensure the device is operated within its specified temperature and humidity ranges.
  • Professional Service: Do not attempt to repair the device yourself. For any issues requiring repair, contact qualified service personnel.

9. Troubleshooting

Device not powering on:
Check the main power supply and ensure all wiring connections are correct and secure.
WiFi connection issues:
If the WiFi indicator light is fast flashing, it's searching for a signal. Slow flashing indicates an offline status. Long-press the third key on the meter's screen (the one showing voltage) for three seconds to initiate pairing mode if it doesn't connect automatically. Ensure your router is working and the device is within range.
No leakage value detected:
Ensure one zero wire and three fire wires pass through the current transformer at the same time. Incorrect CT wiring will prevent leakage detection.
Protection tripping unexpectedly:
Review your alarm settings (Over Voltage, Under Voltage, Over Current, etc.) in the app or on the device. Ensure the thresholds are appropriate for your electrical load and system. Check for actual electrical faults in your system.
Inaccurate readings:
Verify that the current transformer is correctly installed and all wiring is secure. Ensure the device is configured for the correct phase system (3-phase).
Device unresponsive:
Try restarting the device by cycling its power. If issues persist, consider resetting to factory settings (refer to the settings menu, default OFF).

10. User Tips

  • For optimal performance, ensure your WiFi network is stable and within range of the device.
  • Regularly review energy consumption statistics in the app to identify potential energy savings and optimize usage.
  • Utilize the scheduling features (Timing, Countdown, Cycle Time) to automate power control for appliances and lighting, enhancing convenience and energy efficiency.
  • Familiarize yourself with the alarm settings to customize protection levels according to your specific needs and local electrical standards.

11. Warranty and Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Please retain your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.