1. Introduction
The FUNLAB Luminous Controller is an ergonomic joypad designed for an enhanced gaming experience on Nintendo Switch, Switch OLED, and Switch Lite. It features customizable 7-color LED lighting, a turbo function for rapid actions, and programmable back buttons for precise control. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
Image: Front view of the FUNLAB Luminous Controller attached to a Nintendo Switch OLED console.
2. Setup
- Attach to Console: To use the controller, simply slide it onto your Nintendo Switch, Switch OLED, or Switch Lite console in handheld mode. Ensure both sides of the controller are securely clicked into place.
- Initial Connection: The controller should automatically connect to your console once attached. If it does not, ensure your console's system software is up to date.
3. Operating Instructions
3.1. Lighting Control
The controller features customizable 7-color LED lighting for both surface patterns and side lights. Refer to the video below for a visual guide.
Video: Demonstrates how to control the lighting features of the FUNLAB Luminous Controller.
- Turn on Lights: Press the 'T' button and the 'square' button simultaneously.
- Change Surface Light Color: First press the 'T' button, then press the joystick (L3/R3) once to cycle through the 7 available colors (blue, red, yellow, green, purple, orange, white).
- Change Side Light Color: First press the 'T' button, then press the '+' or '-' button once to cycle through the 7 available colors.
- Breathing Light Mode (Surface Light): Press the 'T' button and the joystick (L3/R3) TWICE. The colors will automatically cycle slowly.
- Breathing Light Mode (Side Light): Press the 'T' button and the '+' or '-' button TWICE. The colors will automatically cycle slowly.
- Switch from Breathing to Always-on Mode: While in breathing light mode, press the 'T' button and the joystick (L3/R3) ONCE to return to the always-on mode for surface lights. For side lights, press 'T' and '+' or '-' ONCE.
- Adjust Brightness: Press and Hold the 'T' button and the joystick (press down) at the same time to adjust the brightness of the lights.
Image: The controller's hidden-til-lit display with glowing patterns.
Image: Illustration of the 7-color breathing LED modes.
3.2. Turbo Function
The turbo function allows for continuous rapid input of a button press.
Image: The controller highlighting the turbo function with 3 speed settings (5, 12, 20 shots/s).
- Set Turbo Function: In any mode, press the 'Turbo' button + any of the following buttons: A/B/X/Y/L1/L2/R1/R2/D-pad/SR (Left&Right)/SL (Left&Right).
- Manual Turbo Function (1st Press): Press 'Turbo' button + 'A' button (or desired button) once. Now, pressing and holding the 'A' button will result in continuous rapid input.
- Automatic Turbo Function (2nd Press): Press 'Turbo' button + 'A' button (or desired button) a second time. The 'A' button will now automatically provide continuous rapid input without needing to be held down.
- Clear Turbo Function (3rd Press): Press the 'Turbo' button + 'A' button (or desired button) a third time to clear the turbo function for that specific button.
3.3. Mapping Function (Back Paddle Buttons)
The controller features programmable back paddle buttons (MR/ML) for custom control setups.
Image: The back of the controller highlighting the MR and ML programmable back buttons.
- Program a Back Button: Press and hold the 'M' button on the right/left side of the controller. While holding 'M', press the single button you wish to map (e.g., 'A', 'B', 'X', 'Y', L1, R1, L2, R2, L3, R3, +, -, D-pad buttons).
- Confirmation: The controller will provide a vibration cue once the mapping is successful.
- Use Mapped Button: After mapping, press the 'MR' (right back button) or 'ML' (left back button) to trigger the programmed function.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in constant use.
5. Troubleshooting
- Controller Not Connecting: Ensure the controller is fully seated on the console rails. Try detaching and re-attaching. Restart your Nintendo Switch console.
- Lights Not Turning On/Changing: Double-check the button combinations for lighting control as described in Section 3.1. Ensure the controller has sufficient battery charge.
- Buttons Unresponsive: Check for any physical obstructions or debris around the buttons. If the issue persists, try restarting the console and re-attaching the controller.
- Turbo/Mapping Not Working: Review the instructions in Sections 3.2 and 3.3 carefully to ensure the correct programming steps are followed.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | FUNLAB |
| Model Number | FF02 |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Compatible Platform | Nintendo Switch |
| Interface Type | Direct connection to console rails (Bluetooth for internal communication) |
| Battery Included | Yes |
| Battery Capacity | 500 mAh |
| Playing Time | Approximately 6.5 Hours |
| ABXY Switch Type | Tactile switch |
| Bumpers Switch Type | Tactile switch |
| Trigger Button Type | Non-Linear |
| RGB Lighting Joysticks | Yes |
| Hall Effect | No |
| Joystick Sensor Module Brand/Type | POLYSHINE |
| Package | Yes |
| Origin | Mainland China |
| Certification | CE |
Image: Details on the controller's high-performance battery, showing 6.5 hours playing time and 500 mAh capacity.
7. User Tips
- Customize for Games: Utilize the mapping function for the back paddle buttons to assign frequently used or complex button combinations, giving you a competitive edge in various games.
- Lighting Ambiance: Experiment with the different 7-color LED modes (always-on, breathing, side-only, surface-only) to match your gaming mood or environment.
- Turbo for Repetitive Actions: The turbo function is particularly useful in games requiring rapid, repeated button presses, such as shooting games or quick-time events.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer directly through their official channels. Keep your proof of purchase for any warranty claims.
