1. Introduction
The RSH Smart Tag is a lightweight and portable Bluetooth anti-loss locator designed to help you keep track of your belongings. It works seamlessly with the Apple Find My network, allowing you to locate items whether they are near or far away. This device is Made for iPhone, iPad, and iPod, ensuring compatibility and ease of use within the Apple ecosystem.
Key features include worldwide tracking, a replaceable battery that lasts up to 1 year, seamless connection without requiring a separate app download, and an easy-to-hear sound reminder. The device is MFi certified, ensuring quality and compatibility with Apple products.
2. Safety Information
Your safety is paramount. The Find My Device network is designed to deter unwanted tracking. If your iOS device notices an unfamiliar device moving with you, you will receive a notification. You can then view the unknown device on a map, make it ring to find it by sound, or seek further assistance.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
RF Exposure
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
3. Specifications
| Attribute | Value |
|---|---|
| Model | RSH-itag13 (LocaTag13) |
| Size | 36x36x7.5 mm / 1.41x1.41x0.29 inch |
| Weight | 7.65g / 0.26 oz |
| Battery | CR2032 (Included) |
| Working Voltage | DC 3V |
| Working Current | Standby current ≤5uA, Max sound current 80mA |
| Wireless | BLE 5.2 |
| Wireless Transmission Distance | 40m (open visual distance) |
| Buzzer | Built-in 75 dB (at 10cm) |
| Working Temperature | -5°C to 45°C (23°F to 113°F) |
| Working Humidity | 95% (no condensation) |
| Compatibility | Apple (iOS devices with Find My app) |
| Certifications | CE, FCC |
4. Setup and Installation
Before Use
The RSH Smart Tag works exclusively with Apple's Find My network. No separate app download is required beyond the native Find My app on your iOS device.
- Ensure your iOS device (iPhone, iPad, or iPod) is updated to the latest software version.
- Ensure Bluetooth is enabled on your iOS device.
- Ensure your iOS device is logged into an Apple ID.
How to Connect
- Before connecting, ensure that your phone's Bluetooth is turned on and the WiFi signal is at full strength.
- Pull out the battery insulation tab from the Smart Tag to power on the device. Your phone will automatically prompt the product connection page immediately.
- Click "Connect" on the prompt.
- Read "Use Responsibly" and click "Agree and Continue".
- Once connected, click "Open App" to be redirected to the product management page within the Find My app.
5. Operation
Function Button Usage
- Power On: Press the button once. The device is on.
- Power Off: Press and hold the button for 5 seconds. The device is off.
- Reset: Press the button 4 times quickly within 3 seconds, and then long press the button a 5th time until you hear a beep. The device will be in a reset state.
Finding Your Items
The RSH Smart Tag leverages the Apple Find My network to help you locate your belongings.
- See on Map: Open the Find My app to view a map of the space around you. Zoom in and out to pinpoint the exact location of your tagged item.
- Play Sound: When you need to find something nearby, use the Find My app on your Apple device, press the "Play Sound" button. The locator will emit a sound (built-in 75 dB buzzer), helping you locate your belongings based on the sound. The sound can ring loudly up to 100dB, audible from a room's distance and even in another room.
- Hot/Cold "Nearby Finding": If you know your item is somewhere in the house, the Find My app will indicate its signal strength, allowing you to narrow down its location.
- Lost Alerts: Pop-up alerts are sent when items are lost over a distance. If you leave an item behind, your phone will notify you, showing its last known location.
- One-Click Navigation: Navigate to the precise location where the item was last seen or is currently located using the Find My app.
- Beyond the Phone: The Find My network leverages millions of Apple devices worldwide to help locate your item even if it's far away. If you ask Siri to help you find an item (using the same name as when it was set up), your phone will automatically open the app to locate that item.
6. Battery Replacement
The RSH Smart Tag uses a replaceable CR2032 coin cell battery. The battery life is approximately 1 year.
How to Replace the Battery
- Use a small tool (e.g., a coin or a flat-head screwdriver) to gently open the shell of the Smart Tag.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the shell securely until it clicks into place.
7. Troubleshooting
- Device not connecting: Ensure Bluetooth is enabled on your iOS device and the battery insulation tab has been removed. Try resetting the Smart Tag by pressing the button 4 times quickly within 3 seconds, then long pressing the 5th time until it beeps.
- No sound from the tag: Check the battery level in the Find My app. If the battery is low, replace it. Ensure the volume on your iOS device is not muted.
- Inaccurate location: Ensure your iOS device has location services enabled and is connected to a stable internet connection (Wi-Fi or cellular data). The accuracy depends on the density of Apple devices in the Find My network in the vicinity of your tag.
- Unknown tracker alerts: If you receive an alert about an unknown device moving with you, use the Find My app to locate it, play a sound, or seek further assistance as described in the Safety Information section.
8. User Tips
- Privacy Protection: Your location data is end-to-end encrypted, meaning Apple cannot view or access it. Only you can see where your items have been and where they are currently. The Find My app does not use or share your data.
- Before Returning: If you intend to return the product for a refund, ensure you remove the Smart Tag from your Apple ID and the Find My network to avoid disclosing your privacy.
- Multiple Uses: This Smart Bluetooth Tracker can be used to locate keys, wallets, bags, luggage, and more. If installed on a bicycle, motorcycle, or car, you can view positioning information in the mobile app anytime.
9. Frequently Asked Questions (FAQ)
- Q: Is the Smart Tag compatible with Android devices?
- A: No, the RSH Smart Tag is only compatible with Apple devices and works with the Find My app.
- Q: What is the Find My Network?
- A: The Find My network is a service tailored to help locate a variety of devices and items. It leverages a network of millions of Apple devices to detect a missing device or item nearby and reports its location using a secure, anonymous signal.
- Q: Does the Smart Tag use GPS technology?
- A: No, the Smart Tag does not use GPS. Instead, it utilizes the Find My Network of millions of Apple users around the world to locate items beyond the limitations of distance.
10. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
