ZGCINE ZG-S200

Contents

ZGCINE ZG-S200 V-Mount Battery User Manual

Model: ZG-S200 | Capacity: 199.8Wh | Voltage: 14.8V

1. Introduction

Thank you for choosing the ZGCINE ZG-S200 V-Mount Battery. This high-capacity, rechargeable Li-ion battery is designed to provide reliable power for professional camera equipment, DSLRs, and other compatible devices. Featuring multiple output ports and advanced protection mechanisms, the ZG-S200 ensures efficient and safe operation.

ZGCINE V-Mount Battery S200 with key features and protection icons
ZGCINE V-Mount Battery S200 highlighting its 14.8V, 199.8Wh capacity, and built-in protection features.

2. Package Contents

Please check the package contents upon unboxing:

  • 1 x ZGCINE ZG-S200 V-Mount Battery
  • 1 x E-Mark Cable
Contents of the ZGCINE V-Mount Battery package
The ZG-S200 V-Mount Battery and included E-Mark cable.

3. Setup and Charging

3.1 Initial Charge

Before first use, fully charge the ZG-S200 battery. Use a compatible PD (Power Delivery) charger for fast charging. A 100W PD charger can fully charge the battery in approximately 3.5 hours.

ZGCINE ZG-S200 battery being charged via USB-C PD
The ZG-S200 battery charging via its USB-C PD IN/OUT port with a 100W charger.

3.2 Mounting the Battery

The ZG-S200 features a standard V-mount interface for secure attachment to compatible cameras, monitors, lights, and other professional video equipment.

  1. Align the V-mount plate on your device with the V-mount interface on the battery.
  2. Slide the battery onto the plate until it clicks securely into place.
  3. To remove, press the release button on the V-mount plate and slide the battery off.

4. Operating the Battery

4.1 Powering On/Off

The battery typically powers on automatically when connected to a device. Some models may feature a power button for manual control or to check battery status.

4.2 Checking Battery Level

The ZG-S200 is equipped with LED indicators to display the remaining battery charge:

  • 5 LEDs: 100% Power
  • 4 LEDs: 80% Power
  • 3 LEDs: 60% Power
  • 2 LEDs: 40% Power
  • 1 LED: 20% Power

4.3 Output Ports and Usage

The ZG-S200 offers a variety of output ports to meet diverse power needs:

Close-up of ZGCINE ZG-S200 battery ports with detailed specifications
Detailed view of the ZG-S200's output ports and their electrical specifications.
  • D-Tap: Input: 16.8V/3A (Max), Output: 14.8V/13A (Max)
  • 8.4V OUT: Output: 8.4V/3A
  • 12V OUT: Output: 12V/3A
  • PD OUT (USB-C): Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
  • PD IN/OUT (USB-C): Input: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A; Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A (Max)

Connect your devices to the appropriate output port. The USB-C PD IN/OUT port supports both charging the battery and powering devices with Power Delivery capabilities.

ZGCINE ZG-S200 battery compatible with various devices
The ZG-S200 battery powering a camera, light, laptop, and smartphone.

5. Maintenance and Safety

5.1 Protection Features

The ZG-S200 is built with multiple protection features to ensure safe operation and extend battery life:

  • Overcurrent Protection
  • Overpower Protection
  • Overvoltage Protection
  • Overcharge Protection
  • Short Circuit Protection
  • Temperature Protection
  • Reset Protection
  • Circuit Protection

5.2 General Care

  • Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid dropping or subjecting the battery to strong impacts.
  • Do not disassemble or attempt to repair the battery yourself.
  • Clean the battery's exterior with a soft, dry cloth. Avoid using harsh chemicals or solvents.
  • For long-term storage, it is recommended to charge the battery to approximately 50-60% capacity.

6. Troubleshooting

  • Battery not charging: Ensure the charger and cable are functioning correctly and properly connected to the PD IN/OUT port. Verify the charger meets the required voltage and current specifications.
  • Device not powering on: Check if the battery has sufficient charge. Ensure the cable connecting the battery to the device is secure and compatible with the device's power input. Verify the device's power requirements are within the battery's output specifications.
  • LED indicators not working: If the battery is unresponsive, try connecting it to a charger to see if it reactivates. If the issue persists, contact customer support.

7. Specifications

Feature Specification
Model ZG-S200
Capacity 199.8Wh
Voltage 14.8V
Battery Type Li-Ion, Rechargeable
Material PC + Fiber material
Charging Time (with 100W PD charger) Approx. 3.5 hours
D-Tap Input 16.8V/3A (Max)
D-Tap Output 14.8V/13A (Max)
8.4V OUT 8.4V/3A
12V OUT 12V/3A
PD OUT (USB-C) 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
PD IN/OUT (USB-C) Input 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
PD IN/OUT (USB-C) Output 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A (Max)
Protection Features Overcurrent, Overpower, Overvoltage, Overcharge, Short Circuit, Temperature, Reset, Circuit Protection

8. Warranty and Support

For warranty information or technical support, please contact ZGCINE customer service through the official channels. Keep your purchase receipt as proof of purchase.

9. User Tips

  • Always use the appropriate cables and adapters for your devices to ensure optimal performance and safety.
  • Monitor the battery's LED indicators regularly to avoid unexpected power loss during critical shoots.
  • When using multiple output ports simultaneously, be mindful of the total power draw to prevent overloading the battery.

© 2023 ZGCINE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.