COOLMOON ST350

Contents

CoolMoon ST350 ARGB Luminous Water Cooling Tube User Manual

Model: ST350

1. Important Safety Instructions

For your protection, read and understand all instructions before use. Keep this manual for future reference.

  • Use: For household use only. Use only as described in this manual.
  • Condition: Do not use if the product is damaged in any way.
  • User: Intended for persons aged 18 and above. Persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, may use only under close supervision and if they understand the hazards involved.

Always prioritize safety. Contact the manufacturer with any questions.

This product is designed to be recycled. Please dispose of it responsibly according to local regulations.

2. Product Overview

The CoolMoon ST350 ARGB Luminous Water Cooling Tube is a second-generation lighting accessory designed to enhance the aesthetic of your computer case. It features 360° panoramic soft light, programmable ARGB synchronization, and a flexible silicone design for easy installation.

Key Features:

  • High-Quality Soft Silicone: Provides soft, translucent light with strong light-guiding properties, presenting a warm, jade-like texture.
  • High-Density Lamp Beads: Each 345mm tube contains 35 ARGB lamp beads, ensuring bright, full lighting without visible shadows or light leakage.
  • 360° Panoramic Lighting: An upgraded design offering transparent and bright light effects from every angle.
  • 5V ARGB Aura Sync: Supports programmable 16.8 million colors and synchronization with major motherboard brands (ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) via a 5V 3-pin ARGB interface.
  • Multi-Interface Design: Includes 5V 3-pin female, 5V 3-pin male, and a small 4PIN interface for versatile connectivity.
CoolMoon ARGB Luminous Water Cooling Tubes with 3-pin and 4-pin connectors.
CoolMoon ARGB Luminous Water Cooling Tubes with 3-pin and 4-pin connectors.
Product packaging showing two luminous tubes, mounting clips, and a small instruction manual.
Product packaging showing two luminous tubes, mounting clips, and a small instruction manual.

3. Specifications

AttributeValue
Brand NameCOOLMOON
Model NumberST350 (Luminous Water Cooling Tube)
TypeHose Tube
RGB SupportA-RGB
MaterialSilicone
Body Dimensions345mm (Length) x 19mm (Width)
Weight (including packaging)0.45 kg
Voltage5V DC
Current≤0.3A ±10%
Power≤3.6W ±10%
Number of Lamp Beads35 pcs/each tube
Interface3PIN*2 + 4PIN
Wire Length500mm + 100mm
OriginMainland China
CertificationCE

4. Setup and Installation

The CoolMoon ST350 tubes are designed for easy installation due to their soft and flexible silicone material. They can be directly wrapped around existing water cooling tubes or other components within your PC case.

Package Contents:

  • 2 x CoolMoon ST350 ARGB Luminous Water Cooling Tubes
  • Mounting Clips
  • Instruction Manual (refer to this document and the included physical manual)
Product contents laid out: two luminous tubes, mounting clips, and a small manual.
Product contents laid out: two luminous tubes, mounting clips, and a small manual.

Physical Installation:

  1. Carefully unpackage the luminous tubes and mounting clips.
  2. Position the silicone tubes around your desired water cooling tubes or other PC components. The soft silicone allows for flexible shaping.
  3. Use the provided mounting clips to secure the luminous tubes in place. Ensure they are firmly attached but do not overtighten.
  4. Route the cables to your motherboard or ARGB controller, ensuring they do not interfere with fans or other moving parts.

Electrical Connection:

The ST350 tubes feature a multi-interface design for versatile connectivity:

Detailed diagram of the ARGB tube showing dimensions and connector types: A (5V 3-pin female header), B (5V 3-pin male header), C (Insulation protection cap), D (Small 4PIN interface for COOLMOON controller).
Detailed diagram of the ARGB tube showing dimensions and connector types.
Wiring diagram for the ARGB tubes, showing connections for 5V 3-pin ARGB female header, 5V 3-pin male header, insulation cap, and small 4PIN interface.
Wiring diagram for the ARGB tubes.
  • Motherboard 5V ARGB Sync: Plug the 5V 3-pin female header (A) directly into your motherboard's 5V ARGB (Addressable RGB) synchronization interface. This allows software control of the lighting.
  • Daisy-Chaining ARGB Products: Use the 5V 3-pin male header (B) to connect other 5V ARGB products in series with the ST350 tubes.
  • Insulation Protection: Always cover any unused 5V 3-pin interfaces with the insulation protection cap (C) to prevent short circuits.
  • COOLMOON Controller (Optional): If your motherboard does not support 5V ARGB, you can connect the small 4PIN interface (D) to a dedicated COOLMOON controller (purchased separately) for lighting control.

Important: Ensure you connect to a 5V ARGB header. Connecting to a 12V RGB header will damage the product.

5. Operation

Once installed and connected, the CoolMoon ST350 ARGB Luminous Water Cooling Tubes will illuminate. The operation of the lighting effects depends on your connection method:

  • Motherboard ARGB Sync: If connected to your motherboard's 5V ARGB header, you can control the lighting effects, colors (16.8 million programmable colors), and patterns using your motherboard's dedicated RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
  • COOLMOON Controller: If connected to a COOLMOON controller, refer to the controller's specific instructions for adjusting lighting modes and colors.
Computer setup with ARGB tubes installed, highlighting motherboard synchronization with logos for ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.
Motherboard synchronization allows for software control of lighting.
Installed ARGB tubes and fans in a PC case, displaying vibrant rainbow lighting.
Vibrant rainbow lighting effects in a PC case.

6. Maintenance

To ensure the longevity and optimal appearance of your CoolMoon ST350 ARGB Luminous Water Cooling Tubes, follow these simple maintenance guidelines:

  • Cleaning: Gently wipe the silicone tubes with a soft, dry, or slightly damp cloth to remove dust. Avoid using harsh chemicals or abrasive materials, which can damage the silicone or LED components.
  • Handling: While the silicone is flexible, avoid excessive bending or sharp folds that could stress the internal LED strip or wiring.
  • Cable Management: Periodically check that all cables are securely routed and not pinched or rubbing against sharp edges.

7. Troubleshooting

If you encounter issues with your CoolMoon ST350 ARGB Luminous Water Cooling Tubes, consider the following troubleshooting steps:

  • Lights Not Turning On:
    1. Verify that the 5V 3-pin ARGB connector is securely plugged into the correct header on your motherboard or controller.
    2. Ensure the power supply to your PC is functioning correctly.
    3. If using a COOLMOON controller, check its power connection and functionality.
    4. Confirm that the insulation protection cap is removed from the active 5V 3-pin male header if you are daisy-chaining, and applied to any unused headers.
  • Incorrect Colors or Effects:
    1. If connected to a motherboard, ensure your motherboard's ARGB software is installed and updated to the latest version.
    2. Check the software settings to confirm the correct lighting mode and colors are selected.
    3. If daisy-chaining multiple ARGB devices, ensure they are compatible and configured correctly in the software.
    4. If using a COOLMOON controller, try cycling through its built-in modes.
  • Flickering Lights:
    1. Check all cable connections for looseness.
    2. Ensure your power supply can adequately handle all connected components, including the ARGB lighting.
    3. Test the tubes on a different ARGB header or with a different controller if possible, to rule out a faulty port.

If these steps do not resolve the issue, please contact customer support for further assistance.

8. User Tips

  • Creative Installation: The flexible silicone design allows for creative routing and shaping. Experiment with different placements to achieve unique lighting effects within your PC case.
  • Cable Management: Take time to neatly route and hide the cables for a cleaner build and improved airflow.
  • Software Exploration: If using motherboard ARGB sync, explore all the features of your motherboard's RGB software. Many offer advanced customization, sound reactivity, and temperature-based lighting effects.
  • Compatibility Check: Before purchasing, always verify that your motherboard has a 5V 3-pin ARGB header if you intend to use motherboard synchronization. If not, consider purchasing a compatible ARGB controller.

9. Warranty and Support

For any questions, technical support, or warranty claims, please contact the manufacturer directly.

Manufacturer Information:

  • Manufacturer: Guangzhou Aicai Technology Co., Ltd.
  • Address: Room 709, No. 68, Gangwan RoadHuangpu District, Guangzhou, China

European Authorized Representative (EC REP):

  • Company: VALHALLA TAXE
  • Address: RUE GENERAL DE REFFYE EGD, 88000 EPINAL, France
  • Registration: 913 439 188 R.C.S. Epinal
  • Telephone: +33-0629986194
  • Email: valhallatax@outlook.com

This product is certified with CE, FC, and RoHS standards.

A detailed user manual in PDF format may also be available. Please refer to the official product page or contact support for access to the PDF manual: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.